After formatting my laptop with XP ipodtouch will not synchronise ,Also when asking for homesharing for my AppleTv, they are telling me to deauthorize existing computers.But how?

1.after formatting my computer , the ipodtouch is not getting synchronised
2.when choosing homesharing on appleTv , it is asking to deauthorise earlier computers. I do not find the option for deauthorising earlier computer.
how to tackle these two problems.
Arun Bhattacharya

To discussions-replies
https://in-mg61.mail.yahoo.com/neo/launch?.rand=doic0tk31b190#
Apr 14 at 11:20 AM
It helped in authorising the computer after deauthorizing existing 5 computers.
But even after synchronising the ipodtouch with i tunes, the contents of ipodtouch could not be transferred to the itunes library,especially the musics.
How to tackle this problem?
A K Bhattacharya

Similar Messages

I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie

I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie and what loads up to youtube is the version prior to this final fix. I have tried fixing it at least twenty times. The open to edit version has the video the way I want but when I upload it to youtube, its not the version I want to show.

Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

Hp zv5242qv laptop with windows vista will not run on battery but will run on power adapter

Hello, I have a HP zv5242qv pavilion zv5000 series laptop with windows vista installed. I can run it on the power adapter with and without the battery installed but it will not power up on just the battery, the battery is new and fully charged. When I plug in the power adapter the battery light on the front of the laptop comes o then goes off, anyone have any ideas about my problem ?

Hello,
The situation you describe looks like the unit has problems with the battery, but you say the battery is new and is fully charged.
Then, the issue might be with the system board and maybe there isn't anyhting you can do.
You can try to remove the battery and the ac adapter, and keep the power button pressed for 30 seconds, then connect the ac adapter, turn on the unit, then when in windows put the battery in place, see how it is detected, the power level and restart the PC. See if the unit restarts with the battery in place, if yes, then shutdown the unit.
See what happens and report back.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

HP Pavilion G7 Laptop with Windows 8 will not shut down

Yesterday I did a recovery of Windows 8 and my Laptop works great. However, after doing a Windows update my Laptop did a restart displaying the % complete. I left this run overnight. This morning with a black screen, the computer's Fan running a full speed I am unable to shut down the computer.
Holding down the Power button does nothing. I can't even take the battery out because the computer has locked it's access. My Wifi button is stuck on, I've unplugged my computer but it does have a full charge.
So, How Do I Shut It Down? I've never seen this before.
Scott

Hi @kscottr181 ,
Welcome to the HP Forums!
It is a dynamite place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I see you have a G7 notebook but what is your exact model?
How Do I Find My Model Number or Product Number?
I understand that after doing a Windows 8 update it restarted and remained at 0% complete. You left it overnight and in the morning you had a black screen and the fan was running but you are unable to power it off. You tried holding down the power button but are unable to remove the battery as it has locked access to the battery.
You have removed the AC power but it is still running on battery.
I have never heard of a notebook locking access to the battery before, however some models do not allow battery removal.
First I would try to do a hard reset. HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
If you are still unable to power off the notebook, please disconnect from AC power and just let it drain the battery until it eventually turns off.
Here is a link to HP Notebook PCs - Computer does not start (Windows 8) in case you have a startup issue afterwards.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Does anyone know of a work around for this problem? : iphone 5 will not work on Chryslers uconnect. I found out that they are working on it but have no ETA.   However, they will not help you if your vehicle is older thatn 2008.

Do not get an iphone 5 if you want to use it with a Chrysler product. The Chrysler Uconnect system might pair with your phone but the uconnect system will usually abend and become unusable after a few telephone conversations. I have been to the dealer twice. They have reset the uconnect system twice and I find it works for about 2 to 3 phone calls then it abends and uconnect becomes useless. They had me call Chrysler at 1-800-247-9753. I was told that the iphone five is not compatable at this time with any chrysler uconnect phone through the dash system, even the new vehicles. He had me get on this web site: www.uconnectphone.com as a place to monitor as when it would be compatable. They told me that Samsung seems to be working harder to make it compatible than apple is and they had no idea when it would begin to work. In effect Chrysler was telling me dump the iphone and get a Samsung if you want it to work in a Chrysler. Also, the site would only give you information for Chrysler that were 2008 or newer, they gave the following number to call if your vehicle was older.    I called that number and they told me that Chrysler and Uconnect had no plans at all to make the iphone 5 work, in the future, on any Chrysler older than 2008. So.......If you have a Chrysler or Dodge that is older than 2008 you will NEVER be able to use an iphone5 on the uconnect through the dash system.   Do not buy an iphone if you have an older vehicle. It will never be supported for the $1,000 you paid for this uconnect system on your car. My car is a 2005 Town and Country. I asked both Chrysler and uconnect if their was some sort of work around so I could use my phone. They both told me their was not and that they had no plans to resolve this situation for my vehicle. This means that I need to either get rid of my $42,000 vehicle with low milage or get rid of my Iphone 5. Niether are really good options.
I was also givne the following places to send formal complaints, even though I was told that neither Chrysler, Dodge or Apple were going to do anything to correct my problem:
for email:   [email protected]   or Mail: Chrysler customer Assistance P.O. Box 218004, Auburn Hills, Michigan 48321
If anyone hears of a work around to be able to use an Iphone 5 in a Chrysler or Dodge product, please let me know.

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

Adobe flash player will not install. When asked to install missing plug ins, nothing comes up.

I go to install adobe flash player and nothing comes up. Firefox says I need to install missing plug ins, but when I go to install the missing plug ins, nothing comes up. Says something about doing it manually. I don't know what that is.

You can download the manual installers and run them to install Flash. Details are shown in the Adobe troubleshooting guide - http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

Itunes will not start automatically when iphone plugged in

itunes will not start automatically when iphone is plugged in. it used to. now it turns on iphoto but not itunes. the option to check "open itunes when this iphone is connected" is ghosted and cannot be selected.
i have ios 5 now, but it also did this with the previous os.

Hi billm1013,
I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto updater it still will not open. Any suggestions.

I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto upgrader it still will not open. Any suggestions.

Resetting Printing System helps OS X recognize new printers.
http://support.apple.com/kb/HT1341
When you add the printer, make sure you use IP > Jetdirect and the correct printer IP address.

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

HT4914 If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

Dottie,
If you want to upgrade the quality of a song in your library, you have to delete the library copy and download the matched copy.
Once it is downloaded, it will stay in your library even you don't renew Match.

HT201210 After downloading latest version of iTunes it will not open. This error message is displayed; The program can't star because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then a second error box

After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

After formatting my laptop with XP ipodtouch will not synchronise ,Also when asking for homesharing for my AppleTv, they are telling me to deauthorize existing computers.But how?

Similar Messages

Maybe you are looking for