After formatting Western Digital 4 TB hard drive to Mac OS extended (Journaled) 1.11 TB of space has been used. Number of folders 11 number of files 59. I am running lion Is this a normal use of space?

After formatting Western Digital 4 TB hard drive to Mac OS extended (Journaled), 1.11 TB of space has been used.
Number of folders 11. Number of files 59.
I am running lion10.7
Is this a normal use of space?

Wait.... can the BIOS on your machine support greater than 3TB?
Most cannot.
4TB drives, from what I've read, require an all new drive controller. As older drive controllers would max out at 3TB's.

Similar Messages

Cannot Erase/Format External Western Digital "My Book" Hard Drive

I have a brand new Western Digital "My Book" Hard Drive that I would like to use for SuperDuper clone backup. I am attempting to format the disk for Mac-OS Extended first.
When I connect the HD to my MBP via USB, an error message pops up saying "Disk Insertion - The disk you inserted was not readable by this computer." I then enter Disk Utility. The Western Digital HD is shown in the left pane as a 596.2 GB External Media. The Volume Format is shown as MS-DOS (FAT).
I attempted to erase/format for Mac-OS Extended (Journaled). Selecting the volume in the left pane and then clicking erase returns the error message "Disk Erase Failed with the error: File System Formatter Failed." Just for kicks I tried to erase/format for regular Mac-OS Extended, same result. It will let me erase/format for MS-DOS (FAT), but that's how it's already formatted and doesn't help me.
I tried to erase/format on my wife's MBP, exact same results. Am I doing something wrong or do I have a problem with the external hard drive?
Any help appreciated.
Thanks,
Barry

Thanks for the feedback. Good computing and welcome to the Mac world. Since you're new, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Anatomy of a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

HT4407 Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?

Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
Regards Swishi...p.s If anyone can help me...it'll make my day :3.

ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

I want to format a Seagate Expansion External Hard Drive for Mac and PC

I ordered a Seagate Expansion 2 TB USB 3.0 Desktop External Hard Drive to use with my new Mac and my old PC (or at least get my photos off of both and put them on the drive). I thought all HDs could be formatted to use by both, I was able to get a Mac HD to work with my PC in 2008 (but it died). I am reading that this drive is PC only. I have Parallels and Windows 8 on my Mac if worse comes to worse but I would like all of my computers, real, virtual old and new to be able to access the external drive. Has anyone encountered this issue before? What should I format it in? FAT32? If yes, how would I go about that on a Mac. Or should I just return it?
I'm kind of Mac clueless. I spent my childhood through college on a Mac but I graduated right when OSX came around and I don't know how to work with the Mac "under the hood" like I did with OS9 and with Windows. So please talk to me like I am an an adult idiot.
Thanks!!!!

The optimum choice is to format it ExFAT, but do so on the PC, not the Mac. Alternatively, you can make two partitions - one for the Mac; one for the PC. Partition the drive using GUID when you make the two partitions. Format one using Mac OS Extended, Journaled. Format the other on your PC using NTFS if you won't need to write to it from the OS X side or use ExFAT if you do.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) you will use for Windows from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to MSDOS.
6. Click on the Erase button.
When you connect the drive to your PC reformat the PC volume to either NTFS or ExFAT.

Unable to format external hard disk as mac os extended (journaled)

Have just bought a 750gb Western digital HDD. To be able to use it to store video to use in i movie it needs to be formatted in mac os extended (journal). However when I try to do this in disk utility I get a volume erase error reporting an error on exit. the resulting disk is then unreadable until it is formatted back to MS-Dos (fat) again. Any tips or have I just wasted my money on a disk that is not compatible. On the box it says it is compatible with OSX 10.2.8+?

Try the directions in this article. They are for formatting a drive for Time Machine but will work just fine for your purposes.

Has anyone tried a Western Digital SATA RAID hard drive on a non-RAID controler?

Because of a compatability problem, I want to try a different brand of SATA II drive on my non-RAID motherboard. The WD RAID drives have great specs but I don't know if they will work. WD says they are ONLY for RAID and not to put them on a non-RAID board. My theory is that they will be more reliable over the long term because they are a heavier duty drive.
Has anyone tried this and if so, what were the results?

I think there was some confusion about what I am asking. It is definately not a duplication of my other post and some of the information in that other post is incorrect because I JUST found out that my motherboard controller IS a RAID controller even though I am not using it as one. I will correct that when I am finished with this post.
The other post was about a specific model of Maxtor drive that doesn't work on my motherboard. This post is about Western Digital. The only reason that I even mentioned the word RAID in my previous post is that there is a known compatibility problem with RAID controllers and that drive. I wanted to emphasize that my problem was not the one of that known compatibility problem, but because it is a RAID controller, it might be that problem.
When you use the motherboard's controller as a non-RAID controller, you do format the drives individually, not as a RAID. I know that because I did it that way, not realizing I even had the option of using RAID on this board. That works fine on one model of Maxtor hard drive and does not work at all on the other model of Maxtor hard drive.
What I want to know now is: Will the Western Digital RAID drives will work on a non-RAID controller. The controllers on my add-in card is not RAID. Also, will that drive work on my motherboard's controller even though it is not being used as RAID.
Here is a link to the WD site's description of one such drive. There are several other WD RAID drives, this is just one example... http://www.wdc.com/en/products/Products.asp?DriveID=238&Language=en It does not state whether or not they will work well in a non-RAID environment.

How do I erase an older Western Digital 1TB mirrored hard drive? Newer drives can be erased via a WD Utility, but the WD site says to "ask Apple" about the older ones.

I have a MacBook Pro with OSX 10.7.5. The hard drive is approx. six years old - a Western Digital for Macs, mirrored with 1TB on each half.
Because the drive is "infected" with Time Machine backups that I can't erase, I have removed all important files from the drive and now want to wipe it clean. I've done this with new drives, via the WD Utility that came with the drive, but the older drive doesn't have such a utility. The WD site only has a protocol for PCs.
I find nothing on the Apple site itself. Can you community members help??
(I've tried various ways of deleting the Time Machine backups, but nothing has worked. The instructions for that, which I read on a community support site, were too advanced for me to understand. A Mac IT guy tried to erase the backups, but he didn't know how either. So that is why I'm erasing the drive totally. I've learned my lesson and have a dedicated Time Machine drive now.)

Please be clear:
This is a mirrored RAID that you use as the startup disk?
You now have a different startup disk and wish to erase the RAID mirror?
Do you wish to continue using the RAID for backup?
If all you want to do is erase the RAID to get rid or the Time Machine backups, the use Disk Utility to erase the mirror disk mounted on the Desktop.

Western Digital USB3 external hard drive (attached to new MBP Retina) seems to randomly "eject" itself when I'm trying to back it up via time machine. When this happens, I can't even shut my machine down properly. Ideas?

The backup process will run for sometimes 30 minutes or more. But, it's as if, at some point, the drive just can't be found. I get the message "this drive was ejected improperly". When this happens: my machine won't shut down, disk utility won't run. I have to press and hold the power button to force a shut down. Any ideas what's going on here? A MBP Retina issue? A USB3 issue? A western digital issue (although this drive has been functioning fine on old MBP)?
Thanks!

When you say that you've applied the latest 'patch,' I'm assuming that you mean the latest (July 18) software update for mid-2012 models? It was supposed to address some of the problems with the USB 3.0 ports. I don't think that, in most cases, it's a problem with the drives themselves (USB 2 or 3), rather it seems to be a port problem.
If it wasn't fixed for you using the July 18 Software Update the only thing I can recommend at this point is to see if Mountain Lion - soon to be released - will be able to fix the problems. If not, I would take your unit back to the Apple Store and let them know that you are continuing to have problems with the USB 3.0 ports. They may offer to switch out your logic board, etc.
Good luck,
Clinton

Problem with Western Digital Combo Ext Hard Drive

I recently bought a WD 160GB Ext. HD to use as a backup. Unfortunately I found that when using the Firewire port data transfer would just stall after a while making it difficult to upgrade from Panther to Tiger which can only be done over the Firewire port. Qusstion:
1. Has anyone else has experienced this problem with WD hard drives
2. What HD would you recommend so I don't have this problem
My goal is to upgrade to Tiger on 1 partition of my ext. HD and have a backup of Panther on the other partition. WD said they would replace the drive so I may try that in the hope that maybe I just got a bad one and it's not a design defect.

Hi everybody,
as i wrote a few weeks ago in another similar topic, i have exactly the same problem with a WD MyBook home 1 To. Plugged on USB port, everything's fine. On the Fw400 port, the device is "unknown"and won't mount... So i bought a new cable with FW400/FW800 and plugged it on my Imac's FW800 port and there, the disk mount on the desktop and it works perfectly! I read lots of posts in differents forum which describe the problem with the Imac's FW400 port.
So, i think you have to buy a fw400/fw800 cable and plug it on your Imac's fw800 port !
P.S. : excuse me for my english, i'm french

Western digital 3tb 2nd hard drive shows up in device manager but not in disk manger.

Internal wd 30eurs drive shows up in device manager but not disk manager. Any suggestions on how to format this drive and partition it. I am running windows 7 64bit os

Open the Windows Control Panel and then select Device Manager which allows you to initialize and format new hard drives installed in your system.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Formatting NAS hard drive as Mac OS Extended HFS+

I just got a NAS enclosure for my home LAN and two SATA hard drives to fit.
Installed fine, even using the Windows-oriented browser interface installation.
The drives show up nicely in the finder, and some files copy over without difficulty. HOWEVER, some don't. I'm pretty sure that the problem is that the install utility formatted the hard drives in Windows format, because the files that they will not now accept are ones with Windows-disallowed filenames, such as those with long filenames or Windows-illegal characters.
SO:-
I suspect that my problem would be solved if I could re-format the drives in the NAS enclosure to Mac OS Extended HFS+ format. BUT, the Windows-oriented installation utility provided by the NAS manufacturer (Linksys -- don't believe them when they glibly say their NAS boxes are Mac-compatible!) doesn't offer Mac formatting.
And unfortunately, while the NAS drives show up nicely in my Mac finders (both 10.3.9 and 10.5.5), they don't appear in Disk Utility, which is where I usually go to format hard disks.
SO:
Is there a way to format a NAS disk in Mac format over my home LAN?
As a workaround, i could try temporarily installing the SATA drives internally in my G4 and format them that way, then put them back in the NAS enclosure. But it would be a bit of a kluge, and I'd have to re-transplant them every time I needed to undertake disk maintenance.
Any ideas, anyone? Thanks v. much.

Thank you for your response. I was able to successfully format the drives Extended journaled when they were out of the raid configuration. I was not able to format as Extended (not journaled) in the Raid configuration.

How to format a usb flash drive to 'Mac OS Extended-Journaled' format in windows pc?

Hello,
I have a Mac OS X - Mountain Lion ISO file.
I want to install Mac OS X on my Windows PC.
So I want to format my pen drive in windows to Mac OS X Extended.
Is there any software or other way to do this.
Any helpful suggestions will surely be appreciated. :)

Hi,
this forum is about Microsoft certifications and trainings. For better help and support you should ask your question in the appropriate forum.
Best Regards. When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. This helps us build a healthy and positive community.
@Horizon_Net |
Blog

Greeting, I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the in

Greeting,
I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the information on it so could you tell me what kind of encryption will be used or is there any way to recover the information?
Thanks!

I think FileVault is used to encryp internal hard drive but I wanna encrypt an external hard drive with Mac OS Extended Journaled Encrypted which is completely different!

How to Format Toshiba Hard-Drive for Mac with Parallels?

Hello,
I recently bought a Toshiba Hard-Drive with the following features:
500GB
It is a Canivo Basics 3.0
It is USB 3.0 and 2.0 portable hard drive
It has already been formatted NTFS for Windows XP, Vista, 7, and 8
The box says that it can be reformatted for Mac
I have a Macbook Pro with Retina Display that I bought this year in late March/early April.
It runs OS X Mavericks, and Parallels Desktop 9 for Mac.
I would like to reformat it so that I can use it on my laptop both with Windows and Mac OS at the same time. I do not wish to use a partition as I want to access the hard drive through Mac and Windows at the same time on my laptop and I also want to be able to access the Mac things on a Windows computer and vice versa.
I have never formatted a hard drive before, and I would like to use a completely safe software, or no software at all, if it is possible.
I am sorry but I don't have a very high knowledge of this.
Thanks,
Sandy-Wood

It would be easier, using Parallels, just to format the drive for "Mac OS Extended (Journaled)". You can see it both in the Windows/Parallels and the Mac side. Leaving it formatted as NTFS is not going to allow you to access (write to) the drive unless you use third-party software. Formatting it for Mac lets you use it, as I said, on both the Parallels VM and the Mac side.
If you were using Boot Camp, I would advise leaving it formatted as NTFS and purchasing NTFS for Mac to access the drive on both OS's. You can mitigate that by formatting the drive for Mac:
Good luck,
Clinton

How to format an external hard disk Mac Os Extended (Journaled)?

hello
I connect an external hard disk (2.5' IDE Western Digital Scorpio Blue, WD2500BEVE) via USB or FireWire to my Mac mini. The Disk Utility tool shows an external disk drive of 128 GB - but the disk has 250 GB. How can I format the external USB/Firewire-harddisk 250 GB "Mac OS Extended (Journaled)"?
I tried also to format the disk on a Windows PC (Windows XP). But I could not find a software to format "Mac OS Extended (Journaled)".
Any hints on this? Thanks in advance for any feedback!

andreasmarx wrote:
As I use theses hard disks in a external hard disk case, I'm asking me whether my hard disk cases do not support more that 128 GB disk capacity. Is that realistic?
It is not only realistic but probably the reason your Mac cannot see more than 128 GB of the capacity of the drives mounted in them. It has nothing to do with the interface between the Mac & case (like Firewire) but instead with the controller in the case that connects the raw ATA drive to that interface. Older ATA standards used a 28 bit LBA (logical block address) scheme to access the disk. For 512 bytes per sector this works out to a maximum of 128 GB of addressable disk capacity. The ATA-6 standard, also called Ultra-ATA/100 or just ATA-100, increased the bits in the address space from 28 to 48, with a disk capacity limit of 2 petabytes.
ATA-6 was introduced in 2001, so any external drive case made before then for ATA drives will be forever limited to 128 G. Even now, some come with a controller that does not support the ATA-6 standard, & essentially none have all the hardware to support its full 48 bits of address capacity. However, since 2 PB (2000 terabyte) drives won't be available anytime soon, all you really need is a case that is ATA-6 or better compliant & supports enough address bits for the largest drive you intend ever to put in it.
Case makers don't usually make this information easily available but many now include a "bullet" spec about the maximum capacity their case supports, typically rounded off to simple numbers like 320 GB, 500 GB, or whatever. If you can't find this info, you can assume that the newer the case the more likely it is to support larger capacity drives, or just buy one with a good return policy & test it yourself with the largest raw drive you own.

After formatting Western Digital 4 TB hard drive to Mac OS extended (Journaled) 1.11 TB of space has been used. Number of folders 11 number of files 59. I am running lion Is this a normal use of space?

Similar Messages

Maybe you are looking for