After fresh starting OS 10.6 some programs crashed

When i´m starting my IMAC running on OS 10.6 some programs like firefox or filemaker 9.X will not start or crashes. So i repaired the permissions and after a warm reboot these programs are working, until the next "cold" start.
The permission repair tool wrote 2 warnings:
the SUID -File "System /Library/CoreService/RemoteManagment/...../ARDAgent" was changed and will not repaired.
So to for the following:
The SUID- Datei "System/Library/Private/Framework/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum was changed and will not repaired.
I think the cause of these effects are older software or drivers (like from my HP scanjet 4600), but its difficult to analyse which one is the destroyer of the permission.
No effect was to be seen after stoping some of non apple application startup services in the user account preference place.
Only the warm start after a permission repair helps but its not the way i´d like to work every time.

MacinMuc wrote:
When i´m starting my IMAC running on OS 10.6 some programs like firefox or filemaker 9.X will not start or crashes. So i repaired the permissions and after a warm reboot these programs are working, until the next "cold" start.
For Firefox, try tuning off all add-ons. If things get better, then add them back one at a time to try to identify the culprit(s). You also might try deleting bad and duplicate fonts using Fontbook.
I think the cause of these effects are older software or drivers (like from my HP scanjet 4600), but its difficult to analyse which one is the destroyer of the permission.
Have you checked on the compatibility of your software in general. Go [here|http://snowleopard.wikidot.com> and [here|http://support.apple.com/kb/HT3258].
No effect was to be seen after stoping some of non apple application startup services in the user account preference place.
I would not have expected a fix there.
Only the warm start after a permission repair helps but its not the way i´d like to work every time.
I would imagine the restarts are what helps, not the permissions repairs. As KT indicates the permission warnings you have received are safety ignored.

Similar Messages

Why when i finish to create apple id done after that i go to install some program on app store i cant do that have error cloud not sign ..how to fix this problem and what happen

how to fix this problem i cant install program from app store ,,,show error in cloud not sing in what this mean

Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software.

Mail doesn't display mails in Inbox after fresh start

After starting my MBP, and on first startup of Mail, I do not see my existing mails within the inbox.
To resolve this issue, I can either:
1) restart Mail
2) switch to an existing mail subfolder and then back to the main inbox.
After either option I see my old mails displayed.
Any idea why this happens?
It started after upgrading to SL, never had this issue under 10.5. before.
Thanks

It gets Mail to rebuild the index for the selected mailbox. If it's an IMAP account, Mail will refresh all the messages from the IMAP server. If it's a PoP account, Mail just reindexes.

My MacBook Pro very slow after restarting and can't open some programs

One day I was using my Mac pro everything was fine until I restarted it, now I can't open any downloaded programs like google chrome and activity monitor crashes when I open it. I get beach ball of death by dong simple things like typing and clicking a link, and sometimes when i put it to sleep the fan is still on for a minute but the apple light is off and when I turn it on sometimes I get a blue screen

Maybe you need to provide more information?
What model MacBook Pro do you have?
What version MacOS X?
Do you have any aftermarket add-ons? e.g. an added SSD?
What have you done so far to diagnose the problem?
e.g. Have you scanned your hard disk for errors with Disk Utility?

Nearly 200 MB nonpaged pool used in VM after fresh start

I noticed that a newly installed 2012R2 ( smallest instance for that example) has over 200MB nonpaged pool in use.
logman query -ets
WindowsAzure-GuestAgent-Metrics         Trace                         Running
WindowsAzure-GuestAgent-Status          Trace                         Running
WindowsAzure-GuestAgent-Diagnostic      Trace                         Running
stopping These 3 guys
logman stop WindowsAzure-GuestAgent-Metrics -ets
logman stop WindowsAzure-GuestAgent-status -ets
logman stop WindowsAzure-GuestAgent-diagnostic -ets
and NPP usage Drops from 217MB to ~25MB
as much as I'm into diagnostic traces - this eats up ~25% of the available Memory in a 768 MB VM instance.
this is clearly too much.
can These Loggers :
turned off permanently ?
tweked to reduce buffersize and/or numbuffers   permanently?
thanks,
Christian

Hi,
The memory manager in 32-bit Windows Vista and later, including Server 2008, Server 2012 and Windows 7 (there is no 32-bit version of Windows Server 2008 R2) doesn’t carve up the system address statically; instead, it dynamically assigns ranges to different
types of memory according to changing demands. However, it still sets a maximum for nonpaged pool that’s based on the amount of physical memory, either slightly more than 75% of physical memory or 2GB, whichever is smaller.
Here’s a table summarizing the nonpaged pool limits across different version of Windows:
32-bit
64-bit
XP, Server 2003
up to 1.2GB RAM: 32-256 MB
> 1.2GB RAM: 256MB
min( ~400K/MB of RAM, 128GB)
Vista, Server 2008,
Windows 7, Server 2008 R2
min( ~75% of RAM, 2GB)
min(~75% of RAM, 128GB)
Windows 8, Server 2012
min( ~75% of RAM, 2GB)
min( 2x RAM, 128GB)
Hope this helps !
Regards,
Sowmya

Some programs crash but not in safe mode or for guest user

Hoping that some talented and kind Mac wizard will help me solve a bizarre problem: Some but not all of my programs have started crashing immediately upon launch, but not in safe mode, nor when I log in as a guest user.
The problem began on February 5th, right after I installed an update to my OS (bringing it up to version 10.7.3), which included an update to the firmware for my computer, a Mac mini from mid-2010. The programs that began crashing upon launch *may* be those that were open at that time, but I can’t be sure. They include Adobe Reader, Picasa, Word for Mac, and a sweet little utility called uCalendarX.
Specifically what happens with, say, uCalendarX, is this: After I launch it, nothing appears on screen for a few seconds, and then comes a message that it is trying restore its windows, with a choice of whether to attempt restoring them or not. After a few more seconds comes the news that it has quit unexpectedly. The first several dozen lines of the crash log appear at the end of this posting.
So far my troubleshooting has revealed the following:
(a) When I reboot in safe mode, the programs that crash now work normally.
(b) When I boot the usual way but log on a guest user, the programs that crash now work normally.
(c) Fully emptying the trash made no difference.
(d) The problem was not solved by restoring my hard drive (via Time Machine) to its state the day before I downloaded that update to the OS and the firmware. (This was a drastic step, the intervention of last resort, and I was sure it would work. But no. Perhaps I did not go back far enough for the restoration.)
(e) Deleting the plist files and plist.lockfiles made no difference.
(f) Deleting the files for the app under Saved Application States made no difference.
(g) Disabing the user’s font cache (as happens in safe mode) made no difference.
(h) Uninstalling Adobe Reader, emptying the trash, downloading the latest version, and installing that made no difference – this latest version newly installed continues to crash (but not for a guest user, nor for me, the administrator, in safe mode).
(i ) Repairing permissions on the hard drive made no difference.
I will be mighty grateful for a solution to this perplexing, vexing problem!
B.t.w., I don’t know Unix but was able to do all those (fruitless) interventions listed above.
Gordon Bear
Ramsey NJ U S A
The log from one of the many crashes of uCalendarX begins as follows:
Process:         uCalendarX [750]
Path:            /Applications/uCalendarX 3.2.3/uCalendarX 3-2-3.app/Contents/MacOS/uCalendarX
Identifier:      com.riuz.ucalendarx
Version:         3.2.3 (3.2.3)
Code Type:       X86 (Native)
Parent Process: launchd [289]
Date/Time:       2012-02-20 00:38:48.931 -0500
OS Version:      Mac OS X 10.7.3 (11D50b)
Report Version: 9
Interval Since Last Report:          2463 sec
Crashes Since Last Report:           3
Per-App Interval Since Last Report: 30 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      0CA8DA26-8927-4AC3-B35F-3B2E9FD65A8E
Crashed Thread: 4
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000008bcc45ab
External Modification Warnings:
Thread creation by external task.
VM Regions Near 0x8bcc45ab:
     CoreServices           0000000004fd0000-00000000051ee000 [ 2168K] rw-/rwx SM=COW
-->
     __TEXT                 000000008fe52000-000000008fe85000 [ 204K] r-x/rwx SM=COW /usr/lib/dyld
Application Specific Information:
objc[750]: garbage collection is OFF
Thread 0:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib            0x920136e6 __open + 10
1   libFontParser.dylib               0x9cc5b403 TFileDescriptorContext::TFileDescriptorContext(char const*) + 77
2   libFontParser.dylib               0x9cc5b1c5 TFileDataReference::TFileDataReference(char const*) + 65
3   libFontParser.dylib               0x9cc5b056 TFileDataSurrogate::TFileDataSurrogate(char const*, bool) + 136
4   libFontParser.dylib               0x9cc59af3 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 2581
5   libFontParser.dylib               0x9cc58a7a FPFontCreateFontsWithPath + 193
6   libCGXType.A.dylib                0x950164b0 create_private_data_with_path + 26
7   com.apple.CoreGraphics            0x95349ecf CGFontCreateFontsWithPath + 33
8   com.apple.CoreGraphics            0x95349b09 CGFontCreateFontsWithURL + 442
9   com.apple.CoreText                0x90e1c1aa TCGFont::TCGFont(__CFURL const*, bool) + 90
10 com.apple.CoreText                0x90e1bfb2 TCGFontCache::CopyFont(__CFURL const*) const + 92
11 com.apple.CoreText                0x90e1be6c TBaseFont::CopyNativeFont() const + 50
12 com.apple.CoreText                0x90e1bd6f TTableStore::CopyTable(unsigned int, TCFRetained<__CFData const*>&) + 81
13 com.apple.CoreText                0x90e1bade TBaseFont::CopyTable(unsigned int) const + 72
14 com.apple.CoreText                0x90e1ba0f TcmapTable::TcmapTable(TBaseFont const&) + 31
15 com.apple.CoreText                0x90e1b8fd TBaseFont::GetGlyphsForCharacterRange(CFRange, unsigned short*) const + 27
16 com.apple.CoreText                0x90e1b79b TASCIIDataCache::TASCIIDataCache(TBaseFont const*) + 83
17 com.apple.CoreText                0x90e1b70f TBaseFont::CreateASCIIDataCache() const + 47
18 com.apple.CoreText                0x90e1b690 TFont::InitAdvanceCache() const + 42
19 com.apple.CoreText                0x90e1b4ad TASCIIEncoder::Encode() + 45
20 com.apple.CoreText                0x90e4433f TGlyphEncoder::EncodeChars(CFRange, TAttributes const&, TGlyphList<TDeletedGlyphIndex>&, TGlyphEncoder::Fallbacks) + 925
21 com.apple.CoreText                0x90e19ff6 TTypesetterAttrString::Initialize(__CFAttributedString const*) + 322
22 com.apple.CoreText                0x90e19b9d CTLineCreateWithAttributedString + 47
23 com.apple.HIToolbox               0x963d2b2d TCoreTextEngine::LayoutSingleLine(THIThemeTextInfo*, float) + 23
24 com.apple.HIToolbox               0x963d2a9a TCoreTextEngine::Layout(THIThemeTextInfo*, float, float, TextLayoutType) + 64
25 com.apple.HIToolbox               0x963ad2c9 TCoreTextEngine::VerifyLayout(THIThemeTextInfo*, float, float, LayoutIntent) + 309
26 com.apple.HIToolbox               0x96410b0a TCoreTextEngine::GetThemeTextDimensions(float, THIThemeTextInfo*, float*, float*, float*) + 54
27 com.apple.HIToolbox               0x9640fc51 DataEngine::GetTextDimensions(void const*, float, HIThemeTextInfo*, float*, float*, float*) + 283
28 com.apple.HIToolbox               0x963d1fc5 HIThemeGetTextDimensions + 187
29 com.apple.HIToolbox               0x963d1ca3 HIMenuBarView::MeasureMenuTitle(MenuData*, unsigned char, float*, int, unsigned char*) + 451
30 com.apple.HIToolbox               0x963d1a49 HIMenuBarView::MeasureAppMenus() + 261
31 com.apple.HIToolbox               0x963abb5d HIMenuBarView::EnsureBarLayout() + 489
32 com.apple.HIToolbox               0x963ab152 HIMenuBarView::DrawSelf(short, __HIShape const*, CGContext*) + 520
33 com.apple.HIToolbox               0x963aac22 HIView::DrawCacheOrSelf(short, __HIShape const*, CGContext*) + 86
34 com.apple.HIToolbox               0x963aaa42 HIView::SendDraw(short, OpaqueGrafPtr*, __HIShape const*, CGContext*) + 124
35 com.apple.HIToolbox               0x964395c7 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 755
36 com.apple.HIToolbox               0x964398b9 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 1509
37 com.apple.HIToolbox               0x9643a86b HIView::DrawComposited(short, OpaqueGrafPtr*, __HIShape const*, unsigned long, HIView*, CGContext*) + 1227
38 com.apple.HIToolbox               0x9643a9b3 HIView::Draw(short, OpaqueGrafPtr*, unsigned long) + 81
39 com.apple.HIToolbox               0x9643ad7b HIView::Render(unsigned long, CGContext*) + 45
40 com.apple.HIToolbox               0x963d084f WindowData::PrepareForVisibility() + 137
41 com.apple.HIToolbox               0x963cf893 _ShowHideWindows + 355
42 com.apple.HIToolbox               0x963cf728 ShowHide + 44
43 com.apple.HIToolbox               0x96399b09 _GetMenuBarWindow + 872
44 com.apple.HIToolbox               0x96399765 GetMenuBarView(MenuData*, unsigned char) + 74
45 com.apple.HIToolbox               0x963a2f3a MBarMenuRgn + 26
46 com.apple.HIToolbox               0x963a2d27 _ZL7ShowBar21MenuBarAnimationStylehhh + 281
47 com.apple.HIToolbox               0x963cd42a _ZL21UpdateAggregateUIMode21MenuBarAnimationStylehh + 772
48 com.apple.HIToolbox               0x963e38e5 ShowMenuBar + 163
49 com.apple.AppKit                  0x001a9cad -[NSApplication finishLaunching] + 1331
50 com.apple.AppKit                  0x001a9374 -[NSApplication run] + 142
51 com.apple.AppKit                  0x0043d261 NSApplicationMain + 1054
52 com.riuz.ucalendarx               0x00001eea _start + 216
53 com.riuz.ucalendarx               0x00001e11 start + 4

Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
So the mystery continues, but these additional facts will help with the diagnosis, I hope.
Thanks again for your suggestion.
Gordon

Screen flickering after iOS 6.1 update and some apps crashing frequently on my iPhone 4 .. I didn't have this in 6.0.1 back when people complained about it

hello, I had no keyboard flickering issues back when my iPhone 4 was on iOS 6.0.1 then I updated to 6.1 yesterday and now I have apps crashing frequently and keyboard flickering? anyone else having the same issue after the update? any known solution?

I'm having the same issue on my iPhone 4 since yesterday when I updated to iOS 6.1 from 5.1.1.
After about an hour after the upgrade, it crashed/rebooted itself and went completely white/grey screen with a brighter white line in the middle. My power/sleep button was broke already, so I couldn't do anything on it. I left it to drain the battery for about 6 hours. During that time, the edges around the white/grey screen became darker and darker like burn-in effect. After it ran out of the battery, I connected the phone to the PC through USB and iTunes let me restore it to iOS 6.1 firmware I downloaded before.
The restore was successful, but the entire screen keeps flickering rapidly, not just a part of the screen.
Is it hardware or software related issue?? Any idea?

Some programs open new window instead of new tab in open window

Firefox 17.0.1. I have the option "Open new windows in a new tab instead" set, I use the Tree Style Tab 0.14.2012111201 addon (and others unrelated to tabs or windows), and I have multiple profiles. It seems that since I started using multiple profiles some programs (MediaMonkey's help, for example) insist on opening a new Firefox window. If I select any of the one or more currently open profiles it says "Profile in use". Some programs that want to open an internet site to show their help files do open a tab in the current browser window, as expected and desired. But more programs cause the Choose a profile box to display.

Make sure that you do not start Firefox with the -no-remote switch or have set the environment variable MOZ_NO_REMOTE=1 (Control Panel > System > Advanced > Environment variables).
If you need to have more than one profile open at the same time then start subsequent instances with the -no-remote command line switch.<br />
You can not send links from other programs to a Firefox instance that is started with the -no-remote switch.
In such a case you need to drag links in a Firefox window or paste the link in the location bar.
*http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

All programs crash after Time Machine restore

After noticing that Photoshop hung the system every time I tried to open it, I ran a disk utility scan on my system disk. It came back that my hard drive was bad. I purchased a new hard disk, installed it into my Mac Pro, booted from my Snow Leopard CD, and tried to restore from my Time Machine backup to the new hard disk.
After restoring, my system boots but every program crashes shortly after I open it. If I open Dashboard it crashes after a few seconds... Mail... crashes after a few seconds. All of these programs worked fine on my "bad" hard drive. The only apparent problem was that attempting to open Photoshop would hang the system.
My original hard drive that was backed up to Time Machine was 300 GB. My new hard drive that I'm attempting to restore to is 2 TB. Does this matter?
Any ideas on how to get a stable system restored?

Ack226 wrote:
It came back that my hard drive was bad. I purchased a new hard disk, installed it into my Mac Pro, booted from my Snow Leopard CD, and tried to restore from my Time Machine backup to the new hard disk.
How did you format the new drive?
How did you do the restore? Did you do a full system restore, starting with your Snow Leopard Install disc? If not, what?
Have you done a +*Verify Disk+* and +*Repair Permissions+* on your internal HD, via Disk Utility?
It's possible that as your disk was failing, it corrupted things on your system, and Time Machine backed those changes up, so the restore brought them back. If everything else checks out, you might want to try the restore again, but select an earlier backup.

8.2 DSC : Program Crash After 24 Hours on 'Read Traces.vi'

Hello,
I am chasing a problem in a LabVIEW 8.2 project. The project uses DSC and on a trending screen, I use the 'read traces' VI to read traces from the Citadel database to display on trends.
After about 24 hours of running, the program crashes with "Error 1025". The dialog box reads: "Error 1025 occurred at Tag \\My computer\UPP Tags\Hy-6022_Actual: Open VI Reference in CTL_hdProxyManager.vi->HIST_ReadNumericTraceCORE.vi->HIST_ReadNumericTraces.vi:2->ReadTraces(Numeric).vi:1->!Dash Reactor.vi"
Under "Possible Reason(s):" there is a lot of text, starting with "LabVIEW: Application Reference is Invalid"
I don't seem to be reading an inappropriately large amount of data (in the last occurrence of the error, there were only about 750 data points per trace displayed on the graph, representing about 1 hour of data. The program is running with no operator interaction during this time. The application is updating the graph and therefore running the "read traces" VI about once every 4 seconds. I have 175 shared variables. The PC is a very new, fast one . Let me know what other data you might need.
I attached the main VI (there are a lot of support VI's too, but at least you can see the general idea), along with BMPs of the location of the error on the block digram and the error dialog box.
Michael
Michael Hampson
President
XL Automation, Inc.
Attachments:
ReadTracesError1.zip ‏195 KB
!Dash Reactor.vi ‏1837 KB

Hi Michael,
This was reported to R&D (# 4258E9IQ) and was fixed in LabVIEW 8.2.1. Upgrading to that version should fix the problem you are facing.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Portrait Editing: Filter. brush or rubber. Program Crash

After using Filter. i want to use the brush or the rubber for the eyes and hairs.
But if i start using the brush my program crashs.
Please help me. Because i can't edit my photos.

Sorry.
Mac OS Yosemite
PSE 12

CORESERVICESD takes 90%-100% CPU about 5 minutes after every fresh start

So, coreservicesd process takes 90-100% cpu after a fresh start. It doesn't start immediately after login but about 3-5 minutes after, and it happens +every time+ i start my computer and it lasts about 10 minutes or so before it stops eating the cpu.
I haven't figured out any way to stop this behavior. I've reset smc, emptyed /Library/Caches, clean installed Snow Leopard (without restoring from Time Machine backup) but nothing seems to help.
Does anyone here know what to do in my situation or does anyone have any new ideas what should I try to do? I appreciate every response.

OK folks, problem solved. At least mine is. No coreservcesd eating cpu anymore! Hurray! This is the second time I boot and the computer seems to run perfectly. If the coreservicesd problem comes back I'll report here.
So, what did I do:
1. Changed from 64 bit kernel + extensions to 32 bit.
2. Uninstalled SpiceRack and MozyHome Backup preference panes.
3. Repaired Premissions
4. Cleaned User Cache
5. Cleaned System Cache
6. Cleaned All Users Cache
7. Rebuilt Launch Services
8. Forced Empty Trash
9. Removed Corrupt Preferences
10. Updated Prebindings
11. Reindexed Spotlight
12. Cleaned Archived Logs
13. Cleaned All Logs
14. Flushed DNS Cache
15. Removed .DS_Store Files
16. Cleaned All Browser Caches
17. Updated Whatis Database
18. Updated Locate Database
19. Cleaned Font Caches
20. Booted from SL install dvd and ran Disk Utility's repaid disk & repair premissions.
After these operations my mac runs faster and all errors in the Console log are gone! All steps (except 1, 2 and 20) can be preformed with different maintenance apps. I used an app called MainMenu.
Message was edited by: sarukuku (fixed some spelling errors)

Vista-switched from Explorer to FF 3.6- can't download versions/updates like Adobe Flash-error message: INSTALLER WILL CONTINUE AFTER CONFLICTING MOZILLA FF IS CLOSED-Most pics blocked on sites/programs-can't open some programs that Explorer opens- Help?

I have Vista, recently switched from Internet Explorer to FireFox 3.6-. Since switching over, it can't download alot of versions/updates like Adobe Flash: It error messages: "INSTALLER WILL CONTINUE AFTER CONFLICTING MOZILLA FIREFFOX IS CLOSED".
Most pics blocked on sites/programs. I can't open some programs that Explorer opens. I would sure appreciate any help!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases. Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Can not start/stop fullfilment server after fresh install

Can not start/stop fullfilment server after fresh install
Product: e-business suite (11.5.9)
Platform: Win XP 5.1 (SP2)
We have performed a new installation of ebusiness suite in our windows platform.
Installtion went with out any problem.
But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
script returned:
C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
You are running jtffmctl.cmd
Mon 13/09/2004
01:46 PM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
"Error returned while running OUI"
ERRORCODE = 1 ERRORCODE_END
.end std out.
Class not found: oracle.apps.jtf.fm.engine.processor.Processor
Please let us know how to fix this issue.
Regards, Kunal

edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and als

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and also to open it as Administrator as suggested by a friend but it still refuses to work. I need direct help from Adobe but don't know how to get to them on this website as they seem to rely on user forums to advise customers.

WhiteHouse Norm
This question is already being responded to in the following duplicate thread
Premier elements 11 keeps stopping
Please reply in the other thread which has a discussion in progress.
Thank you.
ATR

After fresh starting OS 10.6 some programs crashed

Similar Messages

Maybe you are looking for