After fresh windows install, can't scroll with screen

Before my disk image got corrupted, I was able to scroll by dragging my finger down the screen (X230 Tablet), but now I can't. Does anyone know how I could get this functionality back?

Hi Chromecarz00,
Welcome to Lenovo Community!
As per the query we understood that you are facing an issue with Touchpad scrolling on your ThinkPad X230.
After installing the Windows have you updated all the required drivers for your system?
Because this kind of issue will occures only if you have not installed the driver, so I suggest you to download and install ThinkVantage system utility application and run it, this will scan for all the required application and drivers for your system.
Below is the link to enter the downloads page and download latest application accordingly, please enter the MTM no. select the exact model.
http://support.lenovo.com/us/en/products/search
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

I paired magic mouse with my laptop in windows, but can't scroll, any solution ?

I paired magic mouse with my laptop in windows but can't scroll, any solution ?

Hello:
Your post lacks enough information to respond intellligently.
The link below addresses some issues:
http://support.apple.com/kb/TS3039
Barry

Updating ipod on fresh Windows install without losing data?

Hey guys.
I have an 80gb iPod Classic, and my iTunes had about 72gb worth of data in the playlist. Recently I had to reformat my system drive and do a fresh Windows install, and as such my iTunes playlist obviously got wiped. If I readd everything that was on my iPod into the playlist, will iTunes try to wipe my iPod and transfer everything over again, or will it recognize that the files are exactly the same and only copy the new files over that weren't originally on it?

If your iPod is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Once the iPod is in manual mode you can add to it without losing any content but you will have to drag it from the library yourself: Managing content manually on iPod and iPhone
However once you are safely connected you can copy content from the iPod to iTunes. There are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
If you have any iTunes Music Store purchases the transfer of purchased content only from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

I am also looking to get whether or not the document is open in a browser window which can be done with event

I am also looking to get whether or not the document is open in a browser window which can be done with event.target.external, but I want it to happen without any user interaction and all the events that I tried while loading the document cause an error. I also tried xfa.host.name, but it always returns "Acrobat" whether the doc is in Reader or the browser, so I guess that is not it. If I put the call to event.target.external in a button, it works (I guess those libraries might not be initialized yet, they are legacy, but I don't know if there is an event that happens on load after that lib is initialized).

// Check the document URL to determine if the form is open in the browser (online) or not (offline)
var MyDoc = event.target;
var MyURL = MyDoc.URL;
if ((MyURL.indexOf("http:") >=0) || (MyURL.indexOf(".tmp") >= 0))
ONLINE_STATUS_SAVE.rawValue = "ONLINE";
else
ONLINE_STATUS_SAVE.rawValue = "OFFLINE";

Skype freezes after fresh windows 7 install on new...

Hello, ever since I freshly installed win 7 on a new ssd, I've had issues with Skype. The program consistently freezes when I'm typing a chat message. On top of this, the people I skype have said that my audio will lag out when I'm talking with them; I've noticed the program being unresponsive at those times.
Anyway, I've gone through the forums trying every solution I could find (e.g. fresh skype install, giving firewall perms, uninstalling messenger plus etc.), and I haven't been able to correct the problem. Sfc scannow has also returned no errors.
I've attached the dxdiag report.
Thanks for any help.
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏7 KB

Alright, the issue has been finally corrected. Skype no longer crashes randomly at launch, my friends can finally understand what I'm saying, and chat doesn't freeze.
What I did to correct the issue since the last update:
- reinstall java
- reset ie 11 settings
- moved usb ps3eye cam to different usb port
Apparently my usb port is messed up... which is weird since it was fine before the fresh intall of win 7.
Thanks for the help

Can't scroll with Bluetooth Laser Mouse as administrator in Windows 7

Hi,
I can't scroll using the Bluetooth Laser Mouse scroll wheel if I open an application "as administrator" in Windows 7 (German Windows 7 SP1 64 bit, Lenovo Mouse Suite 6.48). If I open the same application in the regular fashion, i.e. not "as administrator", scrolling works fine. Applications tested: SciTE, Notepad++.
I have experienced problems with scrolling before in older Mozilla apps (Firefox, Thunderbird). Luckily, these are gone with newer versions. Using the trick I learned back then to disable universal scrolling didn't help here.
Best regards,
Malte

Hi,
Thanks for your help. Unfortenately, it didn't work.
Here is what I did:
- uninstall Mouse Suite 6.48
- reboot
- execute the installer for Mouse Suite 6.50 "as administrator"
- reboot
- open SciTE, scrolling with the scroll wheel does work.
- open SciTE "as administrator", scrolling with the scroll wheel does not work
Malte

Fresh windows install GT780DX

I've been trying all night to perform a fresh install on windows. So far I have been unable to reinstall because after install it keeps saying is translated to" Cannot configure windows to run on the hardware of this computer" (Kan windows niet configureren om op de hardware van deze computer te worden uitgevoerd.)
I suspect this has something to do with missing raid drivers seen in earlier topics, but all the raid drivers on the driver pages are for install AFTER completing windows setup.
Ajy suggestions here since im pretty much stuck with a very expensive paper weight at the moment...

legal windows 7 64 bit premium.
Have fixed the issue in the meantime. The solution was to install raid drivers at the start of windows 7 setup where you have to select a drive.
the drivers you need can be found here:
raid drivers for " F6 diskettes"
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20216&ProdId=2101&lang=eng&OSVersion=Windows%207%2C%2064-bit*&DownloadType=Drivers

Fresh windows install on an envy 14 - How do I get beats working?

Hi All,
I received my brand new hp envy 14 yesterday and I love it. What I usually don't like is the pre installed software that come with every new computer so the first thing I did is I removed the default hdd and replaced it with a brand new ssd and installed a fresh version of windows.
Everything works fine with the default windows drivers except the sound. Meaning the sound works but when I crank up the volume to the maximum, it's not very loud (i.e.: I can get my cellphone to play music louder than that). Sadly I can't compare with the pre-installed version of windows because I didn't even bother booting with it ..
So my question is: What softwares/drivers am I supposed to install to take advandage of the beats of my new laptop? (I have the envy 14, not the beats edition but it stills feature audio beats..)
I tried to change the properties of the speakers (levels and enhancements, bass boost, virtual surrounds, loundness equalization,....)
I also tried to install the IDT drivers found on this forum but I didn't find any hp envy 14 specific version. Could it be the problem?
Any help is appreciated
Thanks!

Here is the audio driver for Envy 14 - ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48435.exe
For the fn+b Key combo to work, you will need to install Quicklaunch from here... ftp://ftp.hp.com/pub/softpaq/sp50501-51000/sp50681.exe
Or has the above drivers been tried....
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

*Problems uninstalling itunes/quicktime after using windows install cleanup

I was having problems installing itunes/quicktime 7.6. Everytime I tried to install it it would say that it does not have a valid digital signiture. So one of the suggestions I saw on this forum was to install windows install cleanup and use it on itunes and quicktime. So I did but all it did is mess up my old itunes/quicktime. Now when I go to try and uninstall itunes and quicktime from the add and remove programs in the control pannel it does not even show itunes or quicktime in my program list. Any suggestions??

Ok, Update. I was able to remove itunes and quicktime manually after going into my windows task manager and to the processes tab and ended all processes involving itunes, apple, or quicktime. So now when I install itunes/quicktimes via apples site when it gets to the end it just disapears and nothing happens. I searched to see if it installed anything and it didn't, didn't even give me any reasons why. Can anyone help me with this?? It would help me a ton!

What will happen to iPod 5G's info when I do a fresh Windows install?

Title basically says it all. I've been using my iPod Video as a storage device as well as for music, and I'm going to do a clean install of Windows XP in the near future-my CD/DVD drive has somehow failed to respond (code 41), so reinstalling Windows to factory settings should do the trick. Only problem I can foresee is what will happen to all the data on my iPod when I reinstall the CD software for iTunes and my iPod drivers-will all the data on my iPod disappear when I reconnect it to my laptop for the first time?
Just wondering if anyone's done this before, as I'll assume it's a typical topic.

When the iPod is connected to the PC after reinstalling Windows, a message will appear asking you if you want to change the computer the iPod is associated with will appear if iTunes is installed; pressing Erase & Sync on this dialog box will delete all content on the iPod that was synced from iTunes. Content copied to the iPod outside of iTunes will not be erased by iTunes unless you explicitly restore the iPod.
(25302)

Fresh Windows Install C55-B5200

My hard drive failed on my Toshiba Satellite C55-B5200 and I decided to buy a brand new SSD and Windows. Can somebody tell me what to do for drivers after I install Windows 8, or if I even have to install the drivers. I have no recovery media and I can't get back into my HDD because it no longer works. Thank you in advance

Satellite C55-B5200
Downloads here.
You need to install essentially all of the drivers and utilities at the site above in order for the laptop to work as designed. And the order is problematic.
I don't have the time or inclination to do that painstaking job. So I would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly installed.
Since you failed to create recovery media, obtain it from Toshiba. Scroll down to Get Recovery Media here
See the instructions in the section Restoring from recovery media, which begins on p. 49 of the User's Guide.
Satellite/Satellite Pro C40/C50/C70-B Series User’s Guide

Boot Camp problem: Windows install can't "see" USB keyboard

I just got my new iMac quad-core i5 and love it.
I tried using Boot Camp to install a copy of Windows XP, just see how it would run.
The installation went fine, until under Windows Setup I have to hit ENTER. Keep in mind, I'm using the old USB keyboard from my G5, which accepted commands up to that point; not the wireless keyboard/mouse that came with the iMac.
Nothing happens, and I have to do a hard reboot to get back out.
Any suggestions? Thanks...

Macaby wrote:
First of all, I have the new 21.5" iMac (also with the wireless keyboard). I did the "Bootcamp" gig with Windows 7 WITHOUT any trouble with the wireless keyboard. Why don't you try it with the standard wireless keyboard?
After about a day of using the wireless keyboard, I plugged in a Logitech keyboard and mouse because I use the extended features (numbers) for data entry. I've asked Santa for a Mac extended keyboard as I'm not that happy about the Logitech although it works fine on the Windows side.
I should add that I used the Magic Mouse as well installing Win 7 in BootCamp. Last night I installed the new Parallels 5.0 on my MB and like it so well that I would like to have it on my iMac as well. However, I've read that there are problems having both BootCamp and Parallels 5 on the same hard drive.

Lost Linksys password after new windows install

I have had my Linksys E4200 for a few years now. When I'm home my cell phone and laptop both use my wireless connection. My desktop computer had the main Cisco console which provided the passwords to both my cell and laptop.
My problem is I recently had a virus attack to my desktop from clicking on a bad email link. I couldn't remove the virus so I did a clean windows install. I can't find my Linksys router box but I found my CD disc. The disc is asking for my password which is probably somewhere in my original box (which of course I can't find now). My router has the model number and mac address but I don't know how to reinstall my console without my original password.
I never disconnected my router when I did my new windows install on my desktop, and my computer still recognizes my Linksys router. When I click on the device icon it says, "network connected", Catagory: wireless network router, Manufacturer: Cisco, Model: Internet Access Server. Is there enough information so I can recover my password and install my console again? Thanks...
Solved!
Go to Solution.

Hello DuMartin,
It is asking for the password you set up for your network. If that will not work, then it would be best to reset and configure the router again.
Help, learn and share

Y40 GPU not working after clean windows install.

I did a clean Windows install since I got a new HDD and I can not get the switchable GPU working again. I have the latest intel and amd drivers from Lenovo installed and both show up under dxdiag. When I try to access switchable graphics settings all I get is a blank page. The game I am playing shows what gpu is being used and it is Intel.
If anyone has any ideas that would be great!
Thank you!

installed 10.4.10 all is well!!! Cool! Tim

How do you make the Safari menu bars at the top and bottom of the browser go away in iOS7 when you can't scroll the screen?

The menu bar at the bottom of Safari screens only goes away if you scroll the screen. But for one page content, the screen can't be scrolled which renders useless any links/buttons at the bottom of the page.
Is there a fix for this in iOS7?
In iOS6, users needed only to tap the screen to remove the Safari menu bars. This does not work in iOS6.

In Safari > View choose Exit Full Screen

After fresh windows install, can't scroll with screen

Similar Messages

Maybe you are looking for