After going thru the whole shopping process pressing checkout, only empties the basket
Cannot complete shopping process with items in the basket ,clicking checkout only empties the basket
== URL of affected sites ==
http://ww.bradfordexchange.com. Plu s 3 other shopping networks.
Have you enabled cookies?
Similar Messages
-
I have a first generation ipod nano which is being recalled, and after going thru the registration process was meant to get a barcode to send the old nano back with but it was blank. In the registration process it also mentioned about apple sending out packaging to return the old ipod. Just wondering if anyone has been thru this process and can offer advice?
Yes they will send you a box with return label. I have been waiting for a month for a box. Just got off the phone with customer service and they said it would be another 3-4 weeks before I receive a box for replacement. Once I send it in it will take another 6 weeks to get the replacement after they receive it. I also hear it a 1st gen nano that will be the replacement.Apple says they were overwhelmed by the response to the recall. Looks like they dropped the ball when they have to spend the money!
-
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps. -
i am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?
They don't normally appear in the download screen ... until I attempt to download another movie. Then they just start appearing. If you click edit - a normal movie download has a circle that appears on the left hand side that allows you to select and delete ... these movies don't have that option so you need to find the movie in you list (under movies) and select the download cloud symbol again to stop it downloading ...you may need to do this a number of times before it stops for a while ... or until you try to download a movie then it starts all over again.
i have logged out of my itunes account. restarted the iPad, removed all movies, restarted the iPad, logged back into my iTunes account and restarted my iPad .... but as soon as I tried to download a single movies ... the other movies started appearing in the downloads again. -
Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?
why does my scanned docs. come out with all colored lines on it after going thru the top feed try?
hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
I did the last software upgrade for iphoto, It goes thru a 9 step process. Mine is stock at step 5 99% complete. It has been that way for 1 week now. I have in excess of 62 k pictures. Program is not stock. Any advice?
force quit, Back up your iPhoto library, Depress the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
LN -
I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
I accidentally put my dads account into iCloud. i need to change it but i dont know how because its grayed out. if i press delete account, will it delete the whole account or just delete it from the iPhone?
but it says DELETE ACCOUNT in red. are you sure its only deleting from the phone?
-
After an attempt to close the Mozilla Firefox page, on every occasion, the firefox.exe process is found at the top of the list when ordering the listed 'processes' by CPU time... even though the web page is gone.
If an attempt is made to restart Mozilla, the system declares that the current Mozilla process should be closed.
If the firefox.exe process is explicitly closed in the Task Manager, only then can Firefox be restarted.Does that also happen if you use File > Exit Firefox?
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]] -
I made a purchase of an album on iTunes...somehow I deleted the whole album from my iMac and now when I go back to my purchases it does not give me the option to download the whole album again, instead it gives me the option of plaing them...please help!!
Where are you looking to download them from ? You might be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your Mac's iTunes. If that album shows there but doesn't have the cloud symbol against it for redownloading then that implies that it's still in your iTunes library
-
Why is the iTunes shop in Australia more expensive than the rest of the world?
Why is the iTunes shop in Australia more expensive than the rest of the world?
How do you know that there is not parity?
Do you know Apples expenses in each country?
Apple has to sell the music for the price that they can negotiate with the owners of the distribution rights in each country.
Perhaps those who own the rights to distribute the music in Australia simply negotiated a higher price. -
What has happened? Where is my iPhoto and why are my photos now in Photos? This *****. The whole reason I bought a Mac was the ease of iPhotos. Horrible. Bad move.
iPhotos is still in your Applications folder. The iPhoto Library is still in your /Home/Pictures/ folder.
-
I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created with the old system. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents? How?
I'm in the same boat: new to OS X and Mac, and in the middle of a book. I switched because I heard about the the ease of using Mac, but so far, for me, it's been a nightmare. I bought 2011 Office Mac and hate everything about it, the most recent being the inability to open or cut or paste any of my original word files. I understand that this could have easily been done with earlier versions, but not Mountain Lion (which I learned is what OSX is.) Since I work with language, I am amazed at the assumptions of the Apple community. It helps to use common language and explain even the basics.
So all the helpful hints to use the latest version of Office Mac are to no avail. Now what? -
TS1424 i didn't get the whole song that i purchased only got 1 min of the song
i didn't get the whole song that i purchased only got 1 min of the song
Other people have been having similar problems with songs over a number of days.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting it from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link. -
Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks
Hi Claire, sounds dire, but some things to try...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964
Maybe you are looking for
-
Hi all, It has been a while since I posted my last version of the free of charge wallboard. Some of you know that I changed jobs since (because my former employer did not like me working on the walboard). Since then I no longer have the option to fur
-
Duplicate failed with below error. The catalog database is up and running "rman_Dup_full.log_DEVDB_2013-01-20_21_11_32" 1600 lines, 71681 characters switch clone datafile all; RMAN-08162: executing Memory Script RMAN-00571: ==========================
-
How can i control the DAQ directly from VB
Actually, it is my first trial to use Visual Basic to get signal from DAQ. And i don't how to interface them. I have read an article to use DataSocket. However, it demostrated the OPC demo in OPC sever only, and so i didn't know how to get the signal
-
HT4890 how can i re-install delete photos in my iPhone ?
how can i re-install delete photos in my iPhone ?
-
Can't open Finder or empty Trash
I put 2 locked files into Trash. Now I get a constant pop-up window "Restore Windows". I cannot empty trash or open it to unlock the files. I tried downloading the Trashit app but it goes to Finder which I cannot open. Please Help. Thx.