After having installed Mavericks I have problems with PSCS5 and the RAW converter. The glider for Exposure goes back to zero, when I use the fill in glider.

When I use PSCS5 after having upgraded to Mavericks I have problems when I use the RAW converter. The glider for  exposure goes back to sero, hven I use the glider for fill in light, that means that my PSCS5 program not can be used. What do I do?

Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
Also make sure the Contact program on your computer is closed.

Similar Messages

  • Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • I'm having problems with iPhoto and the facebook set-up.  Every time I attempt to do so it says an error has occured and try again later.  I have not seen a solution posted.  Therefore, how does one contact Apple to solve the problem?  I'm new to the worl

    I'm having problems with iPhoto and the facebook set-up.  Every time I attempt to do so it says an error has occured and try again later.  I have not seen a solution posted.  Therefore, how does one contact Apple to solve the problem?  I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

    Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

    I have the MacIntosh volume and the Boot Camp partition only.  I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive. 
    The tech at the Apple Store had a previous life as a MSCE and was very helpful.  I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard.  I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick. 
    I do not have another installation, so that is not an option.  I will try to create an external, I have plenty of hard drives around and see if I can get it done that way.  It might take me a week or two to get back to it, but I will comment back upon completion of that effort.  Thanks for your help....Dave Iverson

  • Anybody have problems with IPAD1 and 3g since IOS5?

    anybody else have problems with IPAD1 and 3g since IOS5?

    I'm sure someone does - what problems are you having?
    Note that iOS doesn't run on the iPhone 3G

  • I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!

    I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!

    can you describe exactly what is happening? And give exact error messages
    LN

  • I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me?, I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me? Thanks...

    I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me?, I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me? Thanks...

    Apple does not support downgrading iOS levels.

  • HT4859 I have problem with my IPAD2, there is meesage that IPAD hasn;t been backed up in 1 weeks. Backups happen when this IPAD is plugged in, locked, and connected to Wi-Fi. And then I press OK below those message, but nothing happen and can't do anythin

    I have problem with my IPAD2, there is meesage that IPAD hasn;t been backed up in 1 weeks. Backups happen when this IPAD is plugged in, locked, and connected to Wi-Fi. And then I press OK below those message, but nothing happen and can't do anything too. I push start button, they appear but still "can't reach them". Anybody knows how to fix it back to normal?

    Go to Settings, iCloud, and then Storage and Backup.  You will then see a button to backup your iPad.  It may be that you have much stuff (i.e. photos, apps) for it to do a full backup but you will be able to tell what the estimated backup should be and what it will consist of so that you can choose to prune down items.  If you don't want to backup and get rid of the messages you can just turn backup off from this area as well.

  • I have problems with colours of the pictures in Aperture:

    I have problems with colours of the pictures in Aperture: they becomes pink and green totally "flashy"
    I made all of the base reset's but it's already destroy>.
    Please, could you help me ?
    Thank's,
    Philippe

    Solution
    Delete or restore from Time Machine
    /System/Library/CoreServices/RawCamera.bundle
    /System/Library/CoreServices/RawCameraSupport.bundle
    Download
    http://support.apple.com/kb/DL1666
    Reinstall 4.07. Finished.

  • I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?

    I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?

    Moved to InDesign forum.
    You can start by telling us what the problem is.

  • Hello,  I am have problems with coruption of the photos in a slide show after burning the DVD in iDVD.  This coruption does not always appear when you preview the project.  I have slowed down the burn rate to 1X and kept the quality to professional.

    I am having a great deal of problems with Data coruption in slide shows after I have burned a DVD in iDVD.  I have changed burn rate from best to 1X with no difference in the coruption.  I have the quality set to professional with no improvement.  The size of the project is near 3.95, so it should fit on a single layer burn.  Should I use either iMovie to create the slide show or "Photo to Movie"?  Also, can anyone comment on how I preserve the highest quality picture resolution with a slide show?  If I do use iMovie or Photo to Movie,  the file size should exceed the 4.2 size so, will I have to buy new DVD's which are capable to handle the double layer burn and upto 8 GB?  What DVD's are recommended?  Any preferred brand?  Are there problems with burning with double layer?  I read on this blog of numerous problems.

    DVDs are LOW resolution by today's standards - only about 0.3 megapixels - so there is no way they your images on a TV set will look "High Definition".  See Preparing images for iDVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html for recommendations on image sizes to use.  Using larger images won't give you better  quality, andf in some cases, will lower you image quality because  the Quicktime resizing that occurs isn't the best.

  • Anybody having problems with VectorWorks and the new OS 10 Maverick?

    After installing Maverick, my VectorWorks 2011 keeps craching and will not load.

    I have just run into the same issue. New Macbook Pro running Maverick and I have Vectorworks 2011. Appple support recommends against partitioning the hard drive on a new MacBook Pro running Maverick. (The first call the apple person suggested it. On a follow up call they strongly recommend against doing it because it can screw up the firmware.) How did doing the downgrade work for you, and how did you do it, external drive, partition? I hate to drop $1300 on Vectorworks when I don't yet need it.

  • I have problems with bluetooh  in the imac

    Good day,
    i have problems with my IMAC 27" !
    the problem is with the bluetooh it don't recognize it anda after several turn oof th amax appears the bluetooh signal in the screen but say that its not visible for other devices i sent it to the mac store end it cam,e working good but now has the same problem again
    What can i do.

    Specifically what Bluetooth  devices are you trying to connect? Without specifics its a little tough to help.

  • HT4095 Does Anybody Have Problem with "No Sound" The Dome Season 2, Espisode 11, "Black Ice"?

    I have downloaded the movie twice and still didn't have sound with the Black Ice Episode. I don't have problem with other episodes.
    Any Advice appreciated.
    Thank you in Advance,

    Hello jlingo527,
    Thanks for using Apple Support Communities.
    If the issue is only happening with this one episode, then please report a problem with the purchase by following the directions in the article below.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Take care,
    Alex H.

  • I have problem with 4s and my car 2011 passant cc always drob after I connect phone to car . What Can I do to solve this problem ?

    I have the same problem with my car passat cc 2011 and my phone 4s that drob connection and  calls after time so what can I do to solve this problem ?

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
    If a second-hand iOS device has been 'Activation locked' then only the previous owner - effectively the shop in this case - can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
    If you are unable to contact them to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.

Maybe you are looking for