After having replaced the iMac hard drive I no longer can make iTunes security backups from my iPhone 4S?

After having had my iMac's hard drive replaced (had a defect 1 TB Seagate) and the 10.8.2 reinstalled, I no longer can make security backups from my iPhone 4S. iTunes simply tells me that the backup cannot be saved on my computer (which it has done numerous times prior the replacement of the hard drive). Any suggestions on how to fix this?

Click the green jelly button at top left of iTunes window to resize the screen to fit.

Similar Messages

HT1386 I had to replace the corrupted hard drive in my macbook pro recently, and after I did so I did a full factory software & application restore. Now my iTunes says my iPhone 5 is no longer an authorized device. What should I do?

I had to replace the corrupted hard drive in my macbook pro recently, and after I did so I did a full factory software & application restore. I had to rebuild my iTunes Library by dragging my music folders in my iTunes Media into the iTunes Application and rebuild my playlists manually. After plugging my iPhone 5 into the computer USB, it immediately recognized my iPhone 5, showing: last backups, space left on my iPhone & all options available. I then checked the box to manually manage music etc. The problem I am now having is that when I actually try to drag music from my iTunes to my phone a prompt comes up saying that my iPhone is not an authorized device. What should I do? Any and all advice would be greatly appreciated!!

jrmetzger,
iOS runs on iPads and iPhones; OS X runs on Macs.
Given your situation, I’d highly recommended that you purchase a SATA-to-USB adapter, so that you can test both your old disk and your new disk externally, since it might be that the problem is due to a faulty internal SATA cable rather than due to faulty disks.

IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820 The procedure applies the same to both of the latest cat flavors.

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

I I have a late 2005 power PC G5 that I want to bring back to life. I need to replace the original hard drive, a Maxtor 250 GB Sata. Can I replace it with modern drives, SATA 5-6 etc?

I have a late 2005 power PC G5 that I want to bring back to life. I need to replace the original hard drive, a Maxtor 250 GB Sata. Can I replace it with modern drives, SATA 5-6 etc?

I knew I should never get rid of my old G5's. By the way, there is a browser still supported for the PPC, TenFourFox, if you're not using it already. Go to the Floodgap website (they author it) download it for free. The only thing it doesn't support is the Flash plugin, but the browser works great. Other video types are supported. It's based on Firefox, and runs most of the plugins and add-ons. It's very fast, and beats all other browsers on the browser compatibility and speed test. That's now my default on my G5's. Firefox and Safari are no longer supported. As far as the OS, both Tiger and Leopard were solid for me. The reason, as I stated before, was iMovie. The version in Tiger with iLife was far superior to what Apple changed it to. They 'dumbed it down' for the masses. Even the newest iLife 11 on my Mac Pro quad isn't is good, in my opinion. So Leopard should be fine for you. It's a much larger browser in terms of sheer megabytes and disk space, but it's fine. As far as getting an OS disc, I'm seeing Tiger for about $45.00, Leopard for $50 - 60.00 on that famous auction site. As far as RAM, I have 8GB in my G5 2.3, but you should check Activity Monitor when you are running your apps. See how much green slice you have left (unused RAM). You might find you don't need eight. A Mac Pro will grab more free RAM than a PPC machine will. I have a hard time maxing out use of my 8 on the PPC. Not true with the eight on my Mac Pro. The OS doesn't hesitate to grab and use it. You might be OK with 6GB on your PPC. More will not make you faster, as long as you still have free RAM available. As far as backup on your resurrected machine: look for a firewire enabled backup if can. Use CCC (Carbon Copy Cloner) and make a clone backup. Next time your PPC machine wipes out the hard drive, just take your Firewire drive and plug it into another PPC machine, and you can select it as your boot drive. You'll be back and running in five minutes. You can also take the physical drive out of your enclosure, and put it in your tower to replace the failed drive, and you'll be back to where you were in less than ten minutes, OS and all. The PowerMac has an 800 port, so you can do the 800 on the machine to an 800 port on your backup. A firewire 800 to 800 cable is only about $8.00. It runs nice and fast through the 800 port. I like the OWC Mercury Extreme enclosures. They use USB, Firewire 800, and eSATA, so all your options are open.

When ever the power goes out or I restart my iMac the external hard drive that is used by Time Machine for backups is dismounted ?

When ever the power goes out or I restart my iMac the external hard drive that is used for backups by Time Machine is dismounted and all backups are gone. I can reselect it and it will start working again, but I am worried if the iMac hard drive should fail will I be left without a backup ?

fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups.

Time machine external hard drive requires repair every time I turned the computer off or after I ejected the external hard drive?

Time machine external hard drive requires repair every time I turned the computer off or after I ejected the external hard drive?

What kind of repair?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

After four months my Imac hard drive suddenly began making very audible noises. What should I do? audible noises. What should I do?

After four months my Imac hard drive suddenly began making very audible noises. What should I do?

Back up your system, make a Genius Bar appointment and take it in. If it's 4 months old you are still on warranty, let them fix it.

Use time machine to save both the iMac hard drive data & an external one

Can i program time machine to save both the iMac hard drive data & an external one

Yes, but it's not advised because it's placing too many backups into one hardware basket, also it will greatly shorted your TimeMachine states where you can go back in time to undelete a file.
It's better to have two backups, each on seperate hardware of each drive.
So if you have a boot drive and a external drive, you should have a clone drive and TimeMachine drive of the boot drive, and a backup drive of the external drive. (or two depending how valuable the data is)
If you drop a drive, or knock it over while it's running, all the data could be lost.
With only TimeMachine as your backup, if you drop or lose it, or if it gets stolen, it takes two backups with it.
A clone and a backp of the external drive stored safely off site is ideal, update it once a week or bi weekly as needed.
A clone is bootable, and is exactly like your boot drive, up in seconds.
A TimeMachine can only boot to restore to a new drive if your boot drive dies for some reason.
read more here
Most commonly used backup methods

How can I restore my stystem to factory settings if I replaced the internal hard drive

My computers been runing slow and its time for a factory reset. I only use the computer really as a media center hooked up to my tv since I built my desktop a year or so ago. I already copyied everything I wanted to keep off the laptop. A year or so ago I had to replace the internal hard drive because there was a problem with it. i don't have a restore disk and the partictian didn't get copied to this hard drive. how can i restore to factory settings? the computer is a toshibia qosmio x 505 q885.

Qosmio X505-Q885
If you failed to burn recovery discs, you can obtain them from Toshiba at Get Recovery Media here.
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 70 of the User's Guide.
Qosmio X500 Series User’s Guide
-Jerry

If I erase the imac hard drive will i lose my Discussion ID and alias ?

Hi,
Simply put, If I erase the imac hard drive will i lose my Discussion ID
and alias
Thanks.
Eme.

Hi Niel.
So i could register in my name, (as a opposed to beaus) and give the computer a new name (long and short) ?
Apple care would recognize the changes as long as it is the same serial #,
Is that correct ?
Thanks again for your help.
Eme: )
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5)

I want to install Yosemite onto an external hard drive, and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?

iMac, Model Identifier iMac12,1 with 121.5" screen, 2.8 GHz Intel Core i7 processor, 8 GB 1333 MHz DDR3 memory, 1 TB internal hard drive, running Snow Leopard 10.6.8 from internal drive.
I want to install Yosemite onto a 1 TB external hard drive (OWC) , and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?

It is possible. I'll let you read some articles that cover the setup:
Starting from an external USB storage device (Intel-based Macs) - Apple Support
or
http://osxdaily.com/2013/06/22/boot-mac-external-drive/

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

I had to install a new hard drive in my HP Pavillion DV9700t that has Vista Home Premium 64-bit. After going through the recovery process with backup disk the built in keyboard and touch-pad do not work. During the installation, an error message came up saying something along the lines of "the drivers are not supported by this verison of windows because they are unsigned." The drivers that had that error were "hpqkbfiltr keyboard filter driver," "HP remote control HID Device," and "hpqkdfilter driver." I tried to update the drivers for the keyboard from the hp website, but the keyboard and touch-pad still do not work.
My question is, where do I find the digitally signed drivers for the keyboard and touch-pad that Vista won't flag and disable?
Help please!

Sparkles,
Thanks for the suggestions.
When dealing with MS Fix It, I was choosing run. Upon further investigation on that site, there really isn't a scan that applies to my issue anyways I tried the .NET Framework repair tool, and that seemed to work. It told me to try re-running what I was having issues with, so I tried running the Windows PowerShell again, but again was faced with the following message "windows update standalone installer encountered an error: 0xc8000247." I went back to the .NET screen and hit "Next" because it didn't work, and that responded by saying they were going to submit logs to Microsoft. I won't hold my breath on that one.
I'm to the point where I honestly don't care anymore. I have no idea what to do, because doing a clean install with the discs HP sent me isn't going to help because they are just recovery discs, and not an actual Windows disk. This is the second hard drive I have had to put into my laptop and use those recovery disks on in the last 3-years. The built-in keyboard hasn't worked during that time frame on either hard drive. I don't think the recovery disks I was sent install properly. Not sure where to go from here. I spent way too much money on this laptop years ago having it custom built to handle all of my drafting programs, so I don't want to just kick it to the curb. I was looking into the possibility of just replacing it, but I cannot stand the Windows 8 interface.
I guess I should have fixed the issue with the keyboard on this hard drive before loading all of my programs. Between the recovery disk install, formatting of the hard drive, and installing all of my programs it took well over 12 hours. Not really looking forward ot that again Then there's shockwave and flash and all of the other goodies that my recovery disks won't restore anyways.
Sorry if this seems like a negative post, but I'm just tired of trying to no avail. Maybe I should just take it somewhere to get it looked at, but I can't see them being successful if the recovery disks won't help anyways.
Thanks for you help,
MadBuch

After having replaced the iMac hard drive I no longer can make iTunes security backups from my iPhone 4S?

Similar Messages

Maybe you are looking for