After hitting the Approve button (Standard PO) it doesn't send an email

Hi All,
After the Standard Purchase order is created and i hit the Approve button it takes me to a screen where i have an option to print/fax/Email the Purchase order.
Now when i check the email checkbox and enter the email address.I am not able to get the email. Is there any setup i am missing? as the Order is getting approved but i am still not getting the email.Please let me know as to how i can fix this.
Thanks

Did you configure the workflow mailer and btw check wf_notifications table too. I think you should ask this question in PO forums not in BIP
Thanks.

Similar Messages

My input/output port is no longer functioning. After hitting the proper buttons in the System Requirements/Sound, it still does not function.

After having my MacBook Pro for just less than a year, the input/output port is suddenly not functioning. Even after clicking the correct buttons in the System Requirements/Sound section, I cannot record through the input and listen through the output modes.

Hi Tim,
Your MBP has a one year hardware warranty on it, so I would contact AppleCare or go in to an Apple Store.

Correct Result coming after Hitting the GO Button the 2nd time

Hi Gurus,
I have a report containing two columns
State and Properties_Count
Now since US has 56 states, client does not want to scroll down to bottom to see all the states.
Instead he wants the other half to be besides the first.
so i created two reports and placed them in different section side by side.
in first report the filter is Rcount(TableName.ColumnName) <26
and in the second the filter is Rcount(TableName.ColumnName) >25
Now this works fine...
When for a particular Month the no of rows are less than 26 ,the left side report runs fine, but the right side report gives message as "No Results"
Now i wanted to remove this "No Results" Message in the right side Report when ever the rows are less than 26.
I then applied the guided navigation on the right side report section and in the source Request put the same right side Request.
Issue is now the right side report doesnt show data on clicking the GO button once. ( even when we have rows more than 25)
Its only when i click the GO button again ie the second time, it shows the right side Report as well
What could i be missing here....
One of my colleague had faced a similar issue where she had to click the GO Button twice to see the the guided navigation report.
Any help on this would be highly appreciated.
Thanks
Ashish Gupta
P.S Save the Reports in the shared Folder as when i save it in "my folder" both left side and right side Reports work fine.

Ashish Gupta wrote:
What could i be missing here....
One of my colleague had faced a similar issue where she had to click the GO Button twice to see the the guided navigation report.
Any help on this would be highly appreciated.
Thanks
Ashish Gupta
P.S Save the Reports in the shared Folder as when i save it in "my folder" both left side and right side Reports work fine.It's a Oracle bug. I guess there is time limit for conditional report somewhere in a code and the conditional report dosn't catch result.
I advise you read
- Guided navigation does not do automatic refresh on dashboard [ID 482616.1] on Metalink
- Bug 8448825: GUIDED NAVIGATION DISPLAYS AN YELLOW BAR SHOWING "PREPARING GUIDED NAVIGATION" on Metalink
- Bug 10277166: GUIDED NAVIGATION DISPLAYS AN YELLOW BAR SHOWING "PREPARING GUIDED NAVIGATION"
- Preparing Guided Navigation "Lost"

HOW DO I GET MY OLD SET UP BACK AFTER HITTING THE RESET BUTTON AS A WAY TO GET RID OF OUTFOXTV? i HATE WHAT IT DID TO FIREFOX!

A PRIOR ANSWER SAID TO RESET AGAIN USING OLD FIREFOX INFO. IF THIS ANSWER IS CORRECT HOW DO I DO THIS?

Hi, no need to use caps. We can read. :P
You can reset Firefox by following the instructions below:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
The Reset feature should have kept all of your personal information. It would have only removed extensions and themes, website-specific preferences, search engines, download history, DOM storage, security settings, download actions, plugin settings, toolbar customizations, user styles and social features
When you did the Reset, you should have had an "Old Firefox data" folder appear on your Desktop. You can restore your information if it didn't get restoed by following the instructions at the website gien below
*https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#w_copying-files-between-profile-folders

Cup Approval process requires multiple hits of the APPROVE button

Hello GRC CUP folks,
We have an approval process wherein a given request can require 4 levels of approvals to be provisioned. When a manager logs in to CUP, and tries to approve a request, she hits the APPROVE button, then the yellow status bar appears, showing the approval status so far for this request. And she has to hit the APPROVE button again. Then the yellow status for this current stage turns green and the workflow proceeds to the next stage. It is getting back to me that the managers are having trouble understanding and remembering that they have to hit the APPROVE button more than once (even though we added text to that effect in the approval email).
Is there some way to get the approval to process to the next stage with only one push of the APPROVE button?
Thanks for your ideas.
Yvonne

Hi Yvonne,
Please go to config -> workflow -> stage -> go to change mode for Manager stage.
Make sure that, 'Display Review Screen', 'Comments Mandatory' and 'Confirm Approval' are set to 'NO'. This will make sure that as soon as Manager hits Approve button, the request would be approved.
Regards,
Alpesh

I was playing Angry Birds and had to hit the pause button to listen to something. When I hit the pause/play button again to resume, I heard talking that sounded like a talk-radio program and I couldn't turn it off, even when I turned off my iPad.

Does anyone know what would cause me to start hearing a talk program of some type after hitting the play button after it had been on pause. Hitting the pause button shuts off the talking, but hitting the play button starts it up again. The strange thing is that the talking continues even after I turn off my iPad. The talk program was about silly or trendy news items, not regular news. It sounds like it could be a talk-radio program, but there were no call letters or information on where it was coming from or who was talking. The person doing all the talking is a male and sounds like he could be in his 20's. The only way I could turn it off was to hit the pause button and then turn off my iPad. I just got my iPad last week and had not had any problems with it until this happened. At the time this happened I was playing a version of Angry Birds that kept being interrupted by t-mobile commercials from time to time, which I had never experienced before. either.

Well, shut my mouth! There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
Is there a name for this when you end up replying to your own aggravating question? That's what I did. Now I can go out and listen. It's only 91 degrees. Heaven. Thanks, Apple.

When Click on the Approve Button, workflow take to "page Cannot be Find"

Hi all ,
Please need your urgent help. I have an unique issue here as follows ..
I have a OA Page where Page have a Apprvoal ( Workflow ) button, manager Clicking on the Approval Button which throws the erro r" Page Can not be found".
Anybody faced this sort of issue and if you know the knwo the solution please help me in resolving the issue.
Thanks and regards
Raghu

Hi Anil ,
I am regular visitor to Forum and I thought I will get some clue or atleast some replies on the above thread.
Please help me in resovling the issue.
Here is the details of the issue that I am facing in in our application.
1. I have a Approval Notification on a Page.
2. After clicking the approve button , the control should take me to a Appoval Comments PAge.
3. But after clicking the approval button I am getting ' Page Cannot be found error".
4. I have four botton on this page ( like Redirect, Retunr,cancel ) even after clicking any of these also theos th same error.
Haan ..... We are facing this issue in Prodution and Staging but the Developemnt instance its works fine.
awaiting for your reply.
Raghu

After updating to iOS 8, when I hit the home button once it takes me to the "app switcher."

After updating to iOS 8, when I hit the home button once it takes me to the "app switcher."

Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc") upwards. I thought it was gone too but it's still there~just takes different way to access it.

My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up. help?

My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up. help?

Hi..
Try Resetting the System Management Controller (SMC)
If that doesn't help, try Troubleshooting MagSafe adapters
When you post, please tell us which Mac OS X you have installed. Thanks

Why after I updated my iPhone 4S to the new software it goes dim on its on? I have to hit the sleep button or go to setting to fix it.

Why after I updated my iPhone 4S to the new software it goes dim on its on? I have to hit the sleep button or go to setting to fix it. This has to be a bug.

Hello 6underwood,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
Best of luck,
Mario

How do you keep junk mail from appearing even after I have hit the "junk" button when it appeared the first time?

I have several email accounts that come to my mac. When junk appears I hit the junk button. Does it take awhile to train the junk or is there a way to set up mail so that it automatically goes to junk and does not appear at all in my inbox?
It's so time consuming to get rid of this stuff.
Thanks for any suggestions.
Grammynancy

Hello, it does take time to train it.
You can setup rules if there's any constancy, like I find that 99.999% of mail from yahoo is junk, so I have a Rule setup to just get rid of it permanently, I never see them at all...
But you could have it be If Subject contains Ciagra, Perform the following functions, Mark as Junk... or whatever.

After I hit the search button the list of sites that come up are in really small font

Since yesterday every time I hit the search button the list comes up is in tiny font and I don't know how to change it back

Hit Ctrl + 0 (zero) to reset the zoom level. Does that resolve the issue?

HT1212 When I hit the restore button on itunes to restore my iphone 3gs to factory setting as I am giving it away it takes me to my PC document folder and asks for a file name

Hi,
Im trying to restore my iphone 3GS as i am giving it to my dad. When I hit the restore button when connected to my PC and itunes it takes me to my documents folder and asks for a filename. I cant find anywhere on the internet that this has happened to anyone else and the steps that itunes say are supposed to happen arent. please help.

It says   at the top      under Redeem after I touched that:
          $14.73
Account: [email protected]   (my account name)
Enter your Gift Card or Download Coad

Iphoto, wont upgrade.current version 09-8.1.2. i hit the upgrade button, tells me there is a new version, i say ok, it takes me to the app store, i click on upgrade. it then tells me i can't because i have a previous version installed. what do i do ?

iphoto upgrade issue
hi all, trying to upgrade from iphoto 9/ 8.2.1 too 11. i do the usual routine of upgrading and it take me through to the app store, where i select the version i want, i then get told once i hit the upgrade button that there is a version installed and then it quits . not sure if this is standard behaviour and i need to run the unistall on my current version or there is somthing missing somwhere in my config. any help apreciated

Move the application to the Desktop, go back to the App Store and try purchasing again.
OT

I was updating to 3.6.13 and it was almost finished and it paused on its own and is now stuck there even when I turn my computer off and turn it back on. It doesn' t respond when I hit the resume button. What do I do?

I got a message screen telling me I needed to update to the latest firefox version. So I proceeded to update to 3.6.13. The update window said it was almost finished with just a few seconds remaining. It was taking a very long time when it got to that point so I minimized that screen and went to do something else. My computer kept freezing up so I went back to the update window to see how it was coming along and noticed it had paused, I tried to hit the resume button but it didn't work. I turned my computer off and turned it back on hoping that I could just start the update over but the same message was there when I went to try to update again. It still said it was almost finished with the previous update and that it was paused. What do I do to correct this?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

After hitting the Approve button (Standard PO) it doesn't send an email

Similar Messages

Maybe you are looking for