After hooking up AirPort Extreme, I cannot get on the Internet
Just installed AirPort Extreme. After following instructions and turning power off several times in attempt to reset, I still cannot get back on the Internet. Does anyone have any ideas?
Can you provide information on the make and model number of your modem?
Similar Messages
-
I have AirPort Extreme and cannot connect to the internet with a land line but the WiFi works
I have an AirPort Extreme and have been using for several months successfully, but as of two weeks ago, the line that I have hooked up to my desktop no longer provides internet service, but the WiFi works fine for the I-Pad and I-Pod.
I have checked with my service provider and my modem works successfully hooked up the the AirPort extreme or directly to the PC. When I am hooked in from the modem directly to my PC, I have internet for my desktop, but of course no WiFi.
If I connect the Modem to the Router and the router to my desktop, I have WiFi, but no internet service to my desktop.
I have replaced the network cable but to no avail.
Any suggestions?It appears that there may be something amiss with the Ethernet switch that is built-in the 802.11n AirPort Extreme Base Station (AEBSn) or its configuration settings may be incorrect. I assume that you also tried using the other LAN ports on the AEBSn and the outcome was the same ... no Internet access via a wired connection.
One thing to try is to change the Ethernet adapter settings on the PC. It is possible that its current settings may be appropriate when connected directly to the Internet modem, but may be off for connecting to the AEBSn. If your PC's Ethernet adapter has options to control Speed, Duplex, & MTU, I would change these to the following respectively: 1000 Mbps, Full duplex, & 1500 -
My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC. I hate to spend another $179 if this is just something I'm doing wrong. Please help
I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11. -
i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !
I have trouble with sending e-mail and syncing e-mail. Try changing to 1 day sync under settings. It's sluggish but it works for me until they resolve the issue. MS claims all is normal. If you still have a problem you should report it here: https://status.live.com/report/hotmail
-
I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?
Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner. -
I can not set up my airport extreme, he's worked over the internet but I can not back up
I can not set up my airport extreme, he's worked over the internet but I can not back up
''donngra [[#answer-685379|said]]''
<blockquote>
''FredMcD [[#answer-685331|said]]''
<blockquote>
Your System Details shows;
Installed Plug-ins
Shockwave Flash 15.0 r0
Shockwave Flash 11.5 r502
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''v16.0.0.296<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
Shockwave Director '''v12.1.6.156 http://get.adobe.com/shockwave/'''
</blockquote>
</blockquote> -
I cannot get on the internet by proxy suddently...
All of the problem happend Suddenly!!!!!!!!
i met some problem... All of the problem is not appear in Windows
1. I cannot get on the internet by proxy... I try firefox, google-chrome, konqueror, all of them
cannot, but opera can. I dont' do anything even upgrade my system.
2. Even if I don't use the proxy, a lot of website is not allowed to explore, for example: ebay. all of the browser cannot, but opera can....
3.when I pacman -Syu, it will appear some error:
error: failed retrieving file 'community.db.tar.gz' from ftp.tku.edu.tw : No address record (no address record)
but I still can download the package and install, with poorer speed.....
I cannot use "yaourt" to visit AUR, it may display : curl error
I still can log on amsn and use bbs.
how can I fix this problem? Shall I have to paste any information needed?
Thanks for answering ^ ^
Last edited by snowwhite777 (2010-05-13 03:07:02)ping www.google.com
PING www.l.google.com (72.14.203.103) 56(84) bytes of data.
64 bytes from tx-in-f103.1e100.net (72.14.203.103): icmp_seq=1 ttl=53 time=8.81 ms
Ping www.google.com.tw
PING www.google.com (72.14.203.147) 56(84) bytes of data.
64 bytes from tx-in-f147.1e100.net (72.14.203.147): icmp_seq=1 ttl=53 time=5.64 ms
ping www.yahoo.com
PING fp.wg1.b.yahoo.com (72.30.2.43) 56(84) bytes of data.
64 bytes from ir1.fp.vip.sk1.yahoo.com (72.30.2.43): icmp_seq=1 ttl=54 time=137 ms
ping www.yahoo.com.tw
PING rc.tpe.yahoo.com (119.160.246.23) 56(84) bytes of data.
64 bytes from w2.rd.vip.tw1.yahoo.com (119.160.246.23): icmp_seq=1 ttl=50 time=5.64 ms
when I ping the website that i cannot visit normally
for example : ping www.gamer.com.tw
PING www.gamer.com.tw (60.199.217.25) 56(84) bytes of data.
64 bytes from www.gamer.com.tw (60.199.217.25): icmp_seq=1 ttl=242 time=6.97 ms
I forgot to said that i cannot use "yaourt" to obtain the information of AUR
it may display: curl error
The admin may not change his/her config, because everything is good under windows in the same condition -
I was browsing and was asked if I wanted to update Firefox. I clicked yes. Thought it loaded, but now I cannot get to the internet at all. Now when I attempt to open Firefox and click on HELP, it gives me a Downloading Firefox 3.6.7 - but it will not connect.
== This happened ==
Just once or twice
== I was attempting to load upgrades to 3.6.7 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; InfoPath.1; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can -
I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT
Check to make sure cellular data is not disabled in settings. If it's on, try re-setting the phone. If that doesn't fix it, call AT&T.
-
I cannot get online from foxfire. My wifi is working since i have it on my ipad. is foxfire locked up so it cannot allow me to use a server to get on the internet. there is no connection. when i reset firefox to default maybe it did not set up right.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
*http://kb.mozillazine.org/Error_loading_websites -
Airport extreme won't connect to the internet
I have a replaced New Airport Extreme Gen 4 operating on XP PC (which replaced a previous Airport Extreme). I have configured all settings (so I think) to create a WiFi. The WiFi is created and detected by the PC and iPad3 and both connect. I have had no luck getting onto the internet though. I have a basic ADSL 2+ netgear modem (DM 111 P v2) that connects to the internet fine when the ethernet is directly plug to the PC. I am getting an IP assignment from the network of 0.0.0.1. Which given my limited knowledge is not right. I have reset both modem and Airport by powering down. Next steps I could possibly try?
How do you have your new 802.11n AirPort Extreme Base Station (AEBSn) connected to the the Dell router? ... by wire or wireless? If by wireless, how do you have the AEBSn configured: extend or join?
-
Some devices cannot get on the internet
I'm at end's wits with my network at home. We have a Clear modem with only one antenna to their tower (no internal WiFi), cabled to our Airport Extreme (more than 10 feet away). The Clear modem is annoying and won't let me disable DHCP, so I created a private network with a range of IPs 192.168.1.100 to 200.
Only four devices will get on the internet, the other 2 won't. I can ping from them the router and even an external website but not no browser will work on them.
Any ideas? It's beyond frustrating. Is the Airport limited to 4 devices only? That would seem absurd.
Thanks NicolasRead your router manual.
How to set WEP/WPA. -
Remote access the airport extreme usb hard drive over the internet with multiple users?
I just purchase the new airport extreme 802.11n and set it up on my LAN behind a comcast modem with broadband. I plugged a 3 tb Seagate hard drive formatted with fat32 (default) to it and have set it up for access for all of my computers, ipad, iphone, android in my house. Everything works as expected, internet access, file access to the USB HD on all devices locally through back to my mac. I would now like to allow my daughters in another state to access this drive through the Airport Extreme remotely from their location and have there own accounts on this hard drive to store and move their files for on the go access. I have studied many of the forums and have enabled share disks over WAN, Enable file sharing but no body really gives an exact method of connecting remotely. I had one of my daughters try on her Macbook Pro laptop through the finder, connect to server, by giving her the IP address. She could see the name of the Airport Extreme but could not access the hard disk and got a "Not able to connect message". I am obviously missing something simple that needs to be checked or setup but have drained my brain trying to figure it out. Most of the forums describe clicking manuel setup on the Airport utility, but with version 6.1 this is now where to be found. I have a DYN account but could not figure out where to input this in the Airport utility.
There is a network option which has DHCP lease and range and a box for Enable NAT port Mapping Protocal with Enable default host at:
I am guessing that this is for some other purpose though. Please helpTry installing AirPort Utility 5, then you may be able to follow the guides you mentioned earlier:
http://macintoshdesktop.blogspot.co.uk/2012/12/airport-utility-56-and-mountain-l ion.html -
My Ipad2 won't turn off. I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work. I can't get onto the internet via wi-fi either (don't have a 3G card fitted). All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?
Look at last link.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Is it possible to set up a network with airport extreme that is not on the internet
Is it possible to set up a home network using airport extreme that will be a non-internet option? Not connected to the internet wifi.
Is it possible to set up a home network using airport extreme that will be a non-internet option?
Yes
Not connected to the internet wifi.
If the AirPort Exteme is not connected to the Internet, then Internet connections will not be available on wireless or wired connections.
Maybe you are looking for
-
When I start up my screen will rapidly shrink to a smaller size with a blue border around the window. It rapidly goes from full screen to this smaller screen with the blue border and back again. It seems to be affected by the use of the mouse. My
-
Is there any way for me to remove a broken audio jack stuck in my macbook?
is there any way for me to remove a broken audio jack stuck in my macbook?
-
IPod mini "playlist" error message will not allow me to transfer songs
When I plug my iPod mini into the computer to transfer songs, I get an error message that says that the songs could not be transferred due to non-existent playlists. I deleted my playlists after this message...and I still get the same error message.
-
Integrated Configuration - Message in error shown in SXI_MONITOR?
Hi, We have some messages in error for an integrated configuration (PI 7.1 EHP1) Those message are shown in SXI_MONITOR. (SXMB_MONI) Is this a normal behavior..? We did just deploy the new ICO, could this be a cache issue? Regards, Martin
-
I need to create this effect in PS CS3
It is not a drop shadow as I tried that . All I know is how to use the rectangular marquee to get the rounded corners. What is the correct term for this effect. effect around ring is here http://dagwaremedia.com/pshopeffect.jpg