After host crash - cluster no longer working correctly in SCVMM 2012

Hi
one of our nodes in our cluster crashed. It came back. All the VMs on this host were running on other hosts so failover worked fine BUT for 2 VMs. One of those 2 VMs is - according to VMM - running on the crashed host. The other VM is - according to VMM
- running on another host node which did not fail.
I have a lot of job errors saying that VMM library object virtuals disk is missing of those two VMs. So I looked into the FailoverManager. There I was able to see that the VMs are running on totaly different host nodes then what VMM tells me. In addition
those VMs work just fine. I connected to both of them over Hpyer-V and they are just fine and the application also work without a problem. Please not those VMs are not shown twice or missing in VMM.
Live Migration to the Host node that crashed is no longer possible. But when looking into the status on VMM - it tells me that everything is fine. From Hpyer-V Manager I am able to do live migration to this host. But no longer from VMM console.
I rebooted the host node with no change. I refreshed the host nodes (all) in FailoverManager and in SCVMM, I refreshed the cluster... nothing. So I wanted to remove the cluster from SCVMM and re-add it. Doesn't work... It started with the first host and
after that my cluster was somewhat broken (I thought that removing cluster - NOT "uncluster" - wouldn't have an effect on the cluster itself - well I was wrong). Anyway I repaired the cluster it is back into VMM but I still have the issues with the VMs. There
are only warning on the VMM server that the library object (vhd) is missing but on the cluster nodes itself there are no errors.
Any ideas what I could do. I have no clue what to do about the VM which is supposed to be on this host but in FailoverManager it is on a totally different server. Any ideas?

Hi,
version is SCVMM 2012 RC - yes there were errors with live migration but unfortunately I receive so many warning messages now (about missing library objects for vhd files) that the errors from tuesday are already gone. I guess they might be in database ...
The log files you asked for are from 2011 when the cluster was created - no entries after that.
No the cluster is not in Maintenance or Pause mode - i checked that. Remove and re-join the cluster with VMM 2012 RC was already tried. As described above: that failed - the first cluster node was removed and after that the job failed in VMM. I found the
error message quite ironic because it said that "cluster node 1" is no longer reachable. Nooo really... it just had been removed a second before the "remove cluster" job failed. Unfortunately this job played havoc with my cluster. It took me 4 hours to bring
it back online (mostly VMs).
The good thing is, my cluster is somewhat working again - meaning after I repaired it and was able to re-add the missing cluster node back into VMM live migration now works both from Hyper-V and from SCVMM. The VERY bad part is that now several more VMs
are - according to VMM - runing on "cluster node 1" while the Failover Manager says they are runing on "cluster node 2 or 3...". In addition I get many more warning messages. This error is the one I am trying to eleminate. As said I haven't found anything
which helped me narrow done a solution. Everything I tried so far didn't have any response or - like the cluster - it made things quite bad (temporary). I checked the Event logs on the cluster nodes and VMM itself. Currently there are no error messages there.
Warning messages in VMM:
Warning (23234) VM Refresher encountered an error while creating or updating <vm name> with id XXXXX. VMM cannot find VirutalHardDisk object XXX. Ensure the library object is valid, and then try the operation again.
Warning (10647) The virtual network adapter for the virtual machine <vm name> is connected to a virtual network switch <swtich name> that is not valid.
Does anyone know how to change the time interval of the "VM Refresher"? I get those warning messages for each VM every 2 min. As there are several VMs affected by now I have several thousend messages each day...

Similar Messages

After installing the Maverick upgrade my Apple Mail search and flags no longer work correctly?

after installing the Maverick upgrade my Apple Mail search and flags no longer work correctly? I've already rebuilt the mailboxes with no change in the problem. What else can I do???

Hi as2020,
If you are having issues with Mail in Mavericks, you may want to make sure you have updated to the most recent release. You may find the following article helpful:
OS X: About Mail Update for Mavericks
http://support.apple.com/kb/HT6030
Regards,
- Brenden

Filter list no longer works correctly in 4.6

I have been using the classic filter function for array collections since 4.0. With the recent 4.6 update my filter no longer works correctly.
Example of classic realtime filter:
http://experiments.mrinalwadhwa.com/FilterFunctions/srcview/index.html
While the filter works and updates the list just like it used to, the underlying arraycollection doesn't get updated.
For example:
Pretend I have the following AC
testData = new ArrayCollection([
                        {name:"Item 1", price:18},
                        {name:"Item 2", price:50},
                        {name:"Item 3", price:77},
                        {name:"Item 4", price:52},
                        {name:"Item 5", price:43},
                        {name:"Item 6", price:97},
                        {name:"Item 7", price:56},
                        {name:"Item 8", price:81},
                        {name:"Item 9", price:63},
                        {name:"Item 10", price:29},
                        {name:"Item 11", price:84},
                        {name:"Item 12", price:31},
                        {name:"Item 13", price:78},
                        {name:"Item 14", price:48},
                        {name:"Item 15", price:23},
1. I start typing 9 in a textbox to filter the list
2. list filters down to what I want
3. I click on the item in the list which fires off the IndexChangeEvent
4. changeHandler is called
protected function changeHandler(event:IndexChangeEvent):void
       filterTxt.text = "";
       this.saveScrollPosition();
       var selfact:Object = event.currentTarget.selectedIndex;
     // This should yield 8, however because testdata current view only has one item in the list the event.newIndex is acutally 0 where it should be 8
     // So I would need a way to get to the "current view"
So its like there are two lists.
1. filteredlist (auto generated)
2. list with mydata before filter.
The IndexChangeEvent is giving me the selectedindex of the filtered list (item 0) but resolving item 0 with the unfiltered list and the data does not match up.
Now I can no longer get the correct name of the list after applying the fiilter.
Is this a bug that was introduced in Flex 4.6?

galleherjazz, a little research would tell you a lot. Palm sold the rights to Palm Desktop years ago to a company called "Access" from Japan. It was their responsibility to come up with a version of Palm Desktop that works with Vista. They produced one version, then updated it to 6.2.2 to fix some bugs. After that, they abandoned the project! Palm Inc. moved on to a wholly new operating system (webOS).
"Palm programmers" had nothing to do with the decisions made. Access' version came with no color categorization. Pleas for improvements and bug fixes have fallen on deaf ears.
Palm Inc. appears to have no interest in supporting Windows 7 with their legacy (read: discontinued) devices. Any hope for 64-bit USB compatibility appears to be gone.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

ITunes 10.1 - Shuffle function no longer works correctly

The shuffle function on playlists no longer works correctly since the most recent iTunes update.
It will periodically stop playing without playing the entire playlist. It is a real hassle and kills the mood as you have to go back to the Mac and click play again. Please fix this issue as it is a very basic function.

Thanks for letting us know, however, this is a user to user forum and not an "Apple Run" forum.
You need to report to Apple via:
http://www.apple.com/feedback/

When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

After activating iCloud "video" no longer works on my iPhone and iPad. How can I reactivate "video"?

After activating iCloud, "video" no longer works on my iPhone and iPad. How can I reactivate "video"?

Welcome to the Apple Community lynntice.
Which part of video isn't working, playback or recording, could you please provide a little more information.

After installing Yosemite iWork09 no longer works. Do I need to purchase an upgrade?

After installing Yosemite iWork09 no longer works. Do I need to purchase an upgrade?

All of the iWork 09 apps work for me with Yosemite. Try the following:
1 - delete all files with iWork in the file name from your User/Home/Library/Preferences folder.
2 - delete all files with iWork in the file name from your User/Home/Library/Preferences/ByHost folder.
3 - delete all items (files or folders) with iWork in the name from your User/Home/Library/Caches folder.
4 - reboot and try the iWork apps again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder. This will also work for Mavericks and Yosemite.
For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring up this window:

Facebook app no longer works correctly on my iPad. If a you tube video is on fb the safari loads it automatically, Facebook app no longer works correctly on my iPad. If a you tube video is on fb the safari loads it automatically

Facebook no longer works correctly on my iPad. If a post has a video attached, safari automatically brings up the video. I have deleted the app facebook and re-added. Still having the issue.

It appears to be a bug with (I assume) Facebook's servers - other people are having the same problem, me included, with the app switching into YouTube in Safari and showing the last video that was posted on the wall. Until Facebook (if it is their bug) fix it, then there is not much that you can do, apart from possibly accessing Facebook via Safari on your iPad and/or on your computer instead. The problem has also been reported on Facebook's help site as well - it may be related to their new 'timeline' feature or the new iPad that they are rumoured to be announcing soon

MM Director w/QuickTime 7 no longer works correctly

I updated my PC to QT 7.0.3 and now I have a number of MM Director apps which no longer work correctly. These apps have worked for over 5 years with QT3 - QT6, but not now.
The straingt QT movies play okay, but the MM Dir apps no longer seem to be able to control the QTVR movies, e.g. spin, zoom, etc.
Anyone else seen this?
Thanks.

Apparently, this is a known issue (with QuickTime VR hotspots etc) at Adobe / Macromedia. It was noted in November 2005.
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=ab3642d3&pss=rssdirectorab3642d3
http://www.macromedia.com/cfusion/webforums/forum/messageview.cfm?catid=187&thre adid=1083847
Does ANYONE know if Apple is aware of this issue?
This is a disaster for one of our main products !

Cannot connect to FB from "Settings" after IOS 6 - the FB-app works correctly

Cannot connect to FB from "Settings" after IOS 6 - the FB-app works correctly - but logging in from the settings to be able to "match" my contacts just doesn´t work. It just keeps "porcessing", when I try to login. Any good advice?

I found a fix. I hope this helps.
http://www.dencio.com/2012/01/fixed-facebook-20-and-twitter-20-for.html
I hope it works for you.
Dencio

I recently downloaded 6.1.2 and am regretting it...for one reason...the search function no longer works correctly. !!

I personally and professionally rely on text messaging extensively. Since upgrade, the search function doesn't work correctly. It only returns partial results. This has never happened with previous upgrades. All the old texts are there but it does not search the entire history. If i compose new text and duplicate the recipients from an old text, it will bring up string...just cant search for it. PLEASE HELP SOMEONE.

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

After an update, iTunes no longer works

I'm sorry for such a long story. Several weeks ago, iTunes informed me of an available update. I clicked to update. The next time I open iTunes, the iTunes store no longer worked. Everything else worked fine. I solved this problem by uninstalling and reinstalling. The next time an update was available, this entirely same process happened. After finally getting everything working smoothly for several days yet another update was available. This update being 10.4.1. Fearing the same problem and not having time to deal with it, I declined the update. The next time I opened iTunes, my library no longer existed. The files are on my hard drive still so I attempted to reload them to iTunes. iTunes acts like it is loading the files but in reality is not loading them. Once it is finished, they are still not in my iTunes library. I have uninstalled and reinstalled 10 different times. I am always careful to uninstall all apple related files ie. QuickTime, Bonjour, etc... I have even gone so far as to restore my computer to a previous date. How can I fix this problem?

Don't know. Not my area of expertise. I was just trying to help in some way. You can check this:
Troubleshooting AirPlay and AirPlay Mirroring

Middle click paste no longer works correctly zsh

After a recent update my middle click to paste no longer works right. Instead or just pasting "x" it will paste "00~x01~". I tried terminator and rxvt-unicode and they do the same. This is a recent issue that just started after an update. Is anyone else experiencing this?
Edit: This seems to only happen sometimes randomly. Also, when it does my home key and end key does not take me to the beginning and end of the line.
Edit2: Seems to be related to zsh. When I switch to bash this doesn't occur. Looking into it more. (Edited title). Here's my .zshrc (removed irrelevant stuff):
Edit3: Seems to be related to this new plugin I'm using "safe-paste.plugin.zsh". Looking into it further. Does anything look wrong with this:
# Code from Mikael Magnusson: http://www.zsh.org/mla/users/2011/msg00367.html
# Requires xterm, urxvt, iTerm2 or any other terminal that supports bracketed
# paste mode as documented: http://www.xfree86.org/current/ctlseqs.html
# create a new keymap to use while pasting
bindkey -N paste
# make everything in this keymap call our custom widget
bindkey -R -M paste "^@"-"\M-^?" paste-insert
# these are the codes sent around the pasted text in bracketed
# paste mode.
# do the first one with both -M viins and -M vicmd in vi mode
bindkey '^[[200~' _start_paste
bindkey -M paste '^[[201~' _end_paste
# insert newlines rather than carriage returns when pasting newlines
bindkey -M paste -s '^M' '^J'
zle -N _start_paste
zle -N _end_paste
zle -N zle-line-init _zle_line_init
zle -N zle-line-finish _zle_line_finish
zle -N paste-insert _paste_insert
# switch the active keymap to paste mode
function _start_paste() {
bindkey -A paste main
# go back to our normal keymap, and insert all the pasted text in the
# command line. this has the nice effect of making the whole paste be
# a single undo/redo event.
function _end_paste() {
#use bindkey -v here with vi mode probably. maybe you want to track
#if you were in ins or cmd mode and restore the right one.
bindkey -e
LBUFFER+=$_paste_content
unset _paste_content
function _paste_insert() {
_paste_content+=$KEYS
function _zle_line_init() {
# Tell terminal to send escape codes around pastes.
[[ $TERM == rxvt-unicode || $TERM == xterm || $TERM = xterm-256color ]] && printf '\e[?2004h'
function _zle_line_finish() {
# Tell it to stop when we leave zle, so pasting in other programs
# doesn't get the ^[[200~ codes around the pasted text.
[[ $TERM == rxvt-unicode || $TERM == xterm || $TERM = xterm-256color ]] && printf '\e[?2004l'
Last edited by dodo3773 (2013-05-17 03:35:32)

youngunix wrote:"Middle Click" does it mean pasting text using the wheel in the middle of the mouse? <<Sorry, never heard of that before, that's why I'm asking>>.
I don't use zsh, yet when I've used it (or any other shell) to paste text I just use [Ctrl]+[Shift]+[V] and to copy text from shell use [Ctrl]+[Shift]+[C].
I hope that helps!
Yeah. Pasting by clicking the middle button. It works if I do not use this plugin so I will just leave it disabled I guess until I figure this out.

Audio preview no longer works correctly since AE-CC update

Hi everyone.
Since updating AE CC a couple of days ago (now on 12.1.0.168) on OSX 10.8.5, 2.7GHz i7 16GB RAM, the audio and RAM preview no longer functions correctly.
The steps I follow are:
Open AE
Open project
Press . to preview audio from where I am on the timeline, OR RAM preview workspace
What happens is my cursor turns into the wheel of doom for a about 20 seconds, then the playback begins but the audio is sped up which is wrong. Video is correct speed.
If I stop the audio or RAM preview, then preview again, everything is fine and plays instantly. If a RAM preview loops, then the audio reverts to normal speed.
I can open up any and all of my different project files and audio previews perfectly and instantly as it should. It's just the first time I press the . key on a freshly opened instance of AE that I get this problem.
I've tried restarting my mac to no avail, and also changing the pref settings away from what the settings have always been and that doesn't work either. I've even trashed my prefs and that also doesn't work.
I work exclusively at 25fps. Frame rate for RAM preview is set to auto (25) and changing this from auto to 25 doesn't work.
Memory settings are default since trashing my prefs, 16GB installed, 4GB for other apps, no checked boxes are ticked.
Any ideas on what has happened please?

Thanks for letting us know, however, this is a user to user forum and not an "Apple Run" forum.
You need to report to Apple via:
http://www.apple.com/feedback/

Our menu bar no longer works correctly. The flyouts only show the first menu option and none of the drop-down menu options.

In previous versions of Mozilla we had drop-down menus that contained flyouts that offered more drop-down options. This no longer works in Mozilla 4. If you look at our website in IE7, 8 or 9 and Mozilla 4.0.2 they now work differently. (www.saskschoolboards.ca) Eg. Under About Us / Committees there should be three more dropdowns on a flyout - Committee List; MEPP Report and Semi-Annual Report form. Mozilla 4.0 only shows Committee List and no other drops downs. All of our flyouts are showing only the first selection and nothing else.
Other affected menus dropdowns are:
Board Dev / Trustee Development (there should be 4 dropdowns - not just one)
Communications has Surveys and Elections
Why is Mozilla not showing our menus correctly anymore?
Andrea Ashton - [email protected]

I see this error in the Tools > Error Console: 
 
<blockquote>Error: D.getStyle is not a function
Source File: http://www.saskschoolboards.ca/js/mootools.js
Line: 279
</blockquote>
It looks that the mootools script is no longer compatible with Firefox 4. 
Google Chrome behaves the same and also doesn't open the sub-menus properly and keep the first entry on display once it is open.
Did you check if there is an update for that script?
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

After host crash - cluster no longer working correctly in SCVMM 2012

Similar Messages

Maybe you are looking for