After I create a working ApTab-PIN it is not there when I re-open Firefox.

I bookmarked several sites, then created an aptab PIN in the ap tab bar that worked when I opened it. After I closed Firefox and reopened it, the aptab PIN was no longer there. Using Mac OSX, 10.6.7.

While this is a resolved thread the App Tab pinning SHOULD NOT be session controlled, they should be application saved and not be removed unless one actually removed them manually.
This needs to be fixed in a future update of Firefox 4

Similar Messages

  • When i first open firefox homepage (opens with google) after 3 seconds page freezes and cannoct be closed. i have to open seconed homepage to shot pc down. this has only happened since i installed firfox 4. what do i do to fix this

    when i first open firefox homepage (opens with google as set by firefox) after about 3 seconds the page freezes and cannot be closed or minimised. i have to open second homepage to shut pc down or continue to use pc. this has only happened since i installed firefox 4. what do i do to fix this

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • HT201272 I purchased an audiobook from iTunes On my iPhone.  I got a new phone and after the back up, the books I downloaded were not there.  iTunes wants me to repurchase the books I downloaded.  Is there a way for me to Redon load my already purchased b

    I purchased an audiobook from iTunes On my iPhone.  I got a new phone and after the back up, the books I downloaded were not there.  iTunes wants me to repurchase the books I downloaded.  Is there a way for me to Redon load my already purchased books?

    Hi..
    On your new iPhone tap Settings > Store.
    Make sure Books is turned ON.
    You shouldn't need to re purchase the book >  Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • View only works in one direction,will not change when I turn the phone

    view only works in one direction,will not change when I turn the phone

    Is the rotate lock on?
    http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

  • The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    Swipe up on the bottom of the screen to expose control center and see if the orientation lock is on (top row of controls, far right; looks like a lock with a circular arrow).
    Not all apps support orientation changes, BTW.

  • My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

    My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

    Furthermore my keyboard does not turn sometimes as well

  • Get error message "firefox is in offline mode, uncheck the work offline menu and try again " when trying to open firefox after downloading latest version of firefox

    after downloading the latest version of firefox, when trying to open it I recieved the message, "Firefox is in offline mode. cannot browse web. Uncheck the work offline menu and try again". Have tried several times to open with same results. Have even uninstalled firefox and reinstalled latest version and still get meassage after trying to open.

    thank you - that does make sense except i have another computer that connects to the internet in the same way but it doesnt happen on that one. i didnt change anything - it just started a couple of weeks ago after i updated firefox to 11.0. cant find any settings in firefox to alter either - thanks for the help

  • I am having a persistent problems with the application tabs i pin not being saved. sometimes, they are not present when i re-open the browser.

    i have 3 sites i have repeatedly saved as an app tab. on the rare occasions i exit my browser, my pinned tabs are missing. furthermore, when i attempt to "restore previous session", the tabs that were open may be restored but the pinned tabs are ALWAYS missing and never restored.

    ''app-tabs not being saved...'''
    Be sure you close Firefox properly File (or "Firefox") > Exit not with the "x" in the upper right corner.
    Just because app-tabs will carry over from one session to another does not mean that they are fool proof or should be relied on., I keep mine in a bookmarks folder and replenish app-tabs from there when needed. It is also nice to have the "Tab Handler" to work with tabs and change all or a selection of tabs to app-tabs at once.

  • After installing an update Foxfire 5.0 I get this message when trying to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    I get this message when trying to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    Do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Cs5 gives error that camera type is not supported when trying to open raw files but worked fine earlier

    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information.
    THis is what I get when trying to open files. Half my session opened fine then all of a sudden i get this error. Won't open in LR5 Either. HELP! using LR5 AND CS5 ON A IMAC with a canon 5dm3. everyhting is up to date as i I checked..

    I will try that now. It reads that it is up to date but I will reinstall. The session after it loaded just fine on the same card

  • List data validation failed when creating a new list item but does not fail when editing an existing item

    Dear SharePoint Experts,
    Please help.
    Why does my simple formula work in Excel but not-work in SharePoint?
    Why does this formula...
    =IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
    ...work in Excel but fail when I try to use it in SharePoint?
    The intent of this formula is the following...
    If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
    SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
    Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form. 
    Can you help?
    Thanks.
    -- Mark Kamoski

    Dear Jason,
    I appreciate your efforts.
    However, it seems to me that this statement of yours is not correct...
    "If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
    I believe this is NOT the answer for the following reasons.
    When I create a new item and click Save, the validation error is "list data validation failed".
    When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
    I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
    I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
    I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
    good details.
    However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
    SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
    into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
    SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
    available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
    The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
    But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created  with OOTB
    SP 2013. So, in some cases, there is an extra click for the enduser.
    Thanks,
    Mark Kamoski
    -- Mark Kamoski

  • Why does iPhoto 8.1.2 work on one iMac but not another when both are the same spec both running Mavericks 10.9.1?

    I have a studio of 7 iMacs all running Mavericks 10.9.1, six of the machines are able to open iPhoto 8.2.1 but for some reason after updating the seventh, iPhoto vanished completely from that machine. I reinstalled it from a copy I had saved on a HDD but it now says it's unsupported with this version of OSX. I don't want to pay the £10 + for a piece of software that is only being used to import photos from the occasional iPhone so wont be installing the new version, especially as I know 8.2.1 does work on Mavericks.
    Any suggestions?
    Many thanks

    Reinstall v8 from the install disk as, at a guess, the version of the HDD is missing components.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Just updated to 11.1.3.8 and Airplay does not work. The icon is not there to select

    I use a Gear4 series 1 wireless speaker to stream music to my lounge. I have just bought a Gear4 series 3 speaker to do the same to my dining room but after upgrading Itunes the Airplay logo has vanished so nothing works. The series 1 is still connected to my home network but my iphone, ipad and pc cant see it any more

    Hey fred.bloggs,
    Thanks for the question. I understand you are experiencing issues with AirPlay and a third-party device. The following resource may provide a solution:
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts5209
    Thanks,
    Matt M.

  • Firefox profile missing message when trying to open Firefox...so, how do I rebuild my Firefox Profile on an iMac? None of the existing responses/solutions work!

    OSX Mavericks...After I download Firefox it will not open. Message box appears indicating my profile is missing or cannot be found. All existing solutions speak to 'Open Profile Manager'...there is no such program on a Mac. Mozilla expert/technician needed ASAP. Please explain in clear and plain language how I get Firefox back.

    # Click the Finder icon in the dock.
    # On the menu bar, click the ''Go'' menu, hold down the '''option''' or '''alt''' key and select ''Library''. A window will open containing your Library folder.
    # Open the "Application Support" folder, then open the "Firefox" folder.
    # Rename the ''profiles.ini'' file to ''profiles.ini-old''
    # The next time you start Firefox, it should start with a brand new profile. See the following article for directions on recovering data from your old profile.
    #* [[Recovering important data from an old profile]]
    ''Neil1955 wrote:''
    The next section 'For additional details, see "Use the Profile Manager to create and remove Firefox profiles does not refer to Macs...it speaks to 32-bit and 64-bit windows.
    Provided that JavaScript and cookies are enabled in your browser, support articles will show you information relevant to your operating system. You can also click the Editing Tools section on the left and choose to see information for a different operating system or version of Firefox.

  • 5s touch id quit working.  My fingerprint is not there to edit in settings and the "add fingerprint" option is Grey and won't let me click on it.

    I set up my fingerprint ID and it worked fine for 1.5 weeks.  Last night phone shut off for no reason.  I turned back on and fingerprint id does not work.  Cannot see my fingerprint in settings to even edit it, and I cannot add a fingerprint.  Have done a hard reset, no help there.  Please advise.  Thanks.
    Joel Bixler
    [email protected]

    I had the same issue ... and also restored the phone and the option TOUCH ID was totaly gone.
    But I restored it via the iphone itself ( general reset all data and settings etc )
    It was still not ok
    Then I tried to restore the iphone from ITUNES ( that reinstall completely the OS which is not done if you do a reset via the iphone)
    And then .. the option was back again

Maybe you are looking for