AFTER I EDIT A PDF DOCUMENT, SAVE IT , I CANT RE-EDIT.

AFTER I EDIT A PDF DOCUMENT, SAVE IT , THEN TRY TO ENTER MORE INFORMATION ON THE SAME DOCUMENT, IT WON'T ALLOW  FURTHER  EDITING. WHY?

Hi bay eastwood,
What version of Acrobat are you using, and are you on Mac OS or Windows? What happens when you try to edit the file a second time? Do you get an error, does Acrobat not respond, or does it crash?
Please tell us a bit more about what's happening, and your system setup, and we'll do our best to get to the bottom of it.
Best,
Sara

Similar Messages

  • How do I edit a PDF document that I have converted to Word?

    How do I edit a PDF document that I have converted to a Word document?

    Hi Monica,
    Please elaborate your issue. Are you facing any specific challenges in editing the word document after conversion from .pdf format.
    Regards,
    Rahul

  • Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

    Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

    We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
    With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
    Which one do you have?

  • Edit a PDF document

    How do I edit a pdf document?

    My experience with editing a PDF document whether it be a free product or paid, is very few will be able to convert the document say to Microsoft Word 100 percent of the time with perfect accuracy. It depends a lot on the actual layout of the PDF document.
    I have used numerous products over the years, some good and some not so good. Depends on the product.
    The two that I found the best at a reasonable cost are Nitro PDF Professional and AnyBizSoft. Nitro costing a bit more but offers a lot of additional tools when working with a PDF Document and faster when converting the document.
    Dan

  • I need to know how to edit a PDF document?

    I need to know how to edit a PDF document?

    Preview has limited PDF editing capability.  You can get a lot more on:
    http://www.pdfescape.com/
    or with Wondershare's PDF Editor.
    Adobe Acrobat Pro is the most expensive solution.
    Since you posted under iMac PPC forum, which is for iMacs that can't run any operating system newer than August 28, 2009, I can't say specifically what the capabilities of your version of Preview are.  Go to Apple menu -> About This Mac.  If you have an Intel, you do not have a PPC.  If you have a G5, G4 or G3, you posted to the right forum, and just need to find the version of Preview you have in Applications folder.

  • Can you edit a pdf document without exporting it into a word document?

    Can you edit a pdf document without exporting it into a word document?

    Hi sylvias99766822,
    You can if you have Acrobat. If you don't, feel free to give it a try. You can download a 30-day trial from http://www.adobe.com/products/acrobat.html.
    Keep in mind, though, that Acrobat isn't intended to be a word processor. So, while you can make adjustments to text and graphics, if you need to do a major overhaul of the text in the document, it's best to go back to the source document and edit the content there.
    Best,
    Sara

  • How do I edit a pdf document and save it without having to save it as a new file?

    I recently copied a pdf document to my computer. I need to make changes to it and forward it to someone else for review. I can make the changes, but when I try to save it, I get a message that the document is read only or is already open. As far as I can tell, there are no restrictions on the document and it is not already open.
    I am using Adobe Acrobat X on a PC running Windows 7 64 bit.
    Any help with this frustrating problem would be appreciated.

    Often what you describe occurs because Windows Explorer is open and has focus on the file.
    Put focus elsewhere and, if the Preview mode is "on" turn it "off".
    Be well...

  • Editing a PDF document

    OK, so I have a job application downloaded from its source in
    PDF format. I'd like to fill it out and save it in, say, a word
    document. I see no guidelines for doing this. Uploading it to
    Acrobat changes the format completely. Ditto with cut/paste. I'm on
    a mac, by the way.
    Any help would be appreciated.

    airman-nyc
    Could you confirm if you could click and start typing inside
    some de-marked form fields in your PDF opened inside Acrobat or
    that the document is a plain PDF with no form fields? I would
    request that you open the PDF inside Acrobat instead of Mac's
    preview application (to be sure).
    Mostly, I think you would need Acrobat Std/Pro desktop
    software to edit a PDF.
    If the application form is a plain document (with no form
    fields where one could click and start typing into), then you might
    wish to try 'automatic field recognition' in Acrobat
    (Advanced->Accessibility->Run form field recognition). After
    form fields are recognized, you could fill those up. I am on
    Acrobat 9 (so menu-items may be a bit different if you are using an
    older version).
    Generally, PDF is a final form document and you might wish to
    export it to .doc/.rtf file format (using File->save as) if you
    wish to do heavy editing.

  • Word macros are disabled after converting to a PDF document.

    We work with Word templates that contain macros.
    After you convert a Word document into a PDF document, the macros of the attached template are disabled.
    The conversion takes place via the Adobe Acrobat icons.
    Used Products:
    - Windows7
    - With Office 2007 SP2
    - Adobe Acrobat 9.3.3 Pro
    The described problem only occurs in Word.  Outlook, Excel and Power Point are not affected.
    Thank you for your time and help

    Hi Buster,
    The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer.  This file is usually already a fillable form.  Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
    I'm sorry for the inconvenience.
    Please let me know if you have any questions or if I can be of further assistance.
    -David

  • How can i edit a PDF document?

    would like to edit a pdf doc. how can i do that?

    It is always best to edit the source document - MS Word, for example - then create a new PDF. If the source document is not available, you can try saving the PDF as a Word document. Sometimes that works reasonably well, other times not so much. It is possible to make small edits using the Content Editing tools in Acrobat, but do not expect too much. Acrobat is not a word processor.

  • How do i un-edit a pdf document using my Samsung 10.1 tablet?

    How Undo a pdf document?

    Thank you for your response. Using Adobe reader I underline or highlight the answers to the Watchtower study edition down loaded from their web site www.JW.org . Sometimes the whole paragraph inadvertently gets highlighted and then I can't seem to undo it.
    Best Regards,
    RW Rose
    Courtland, CA
    Sent from Samsung tablet note 10.1 (2014 edition)

  • Editing existing PDF documents

    I often receive PDF forms that require information to be added and then returned to the sender. How can you open a PDF file in Acrobat such that you can type in the necessary information and then resave it as a PDF file? Note that I have no design input or control for the original PDF documents.

    You can add text form fields (under TOOLS in AA8), select the text touchup tool and hold the ctrl key as you place the cursor, edit existing text with this tool (not easy -- often seems to mess up), or use the Typewriter tool. Basically, editing a PDF is not recommended except for minor changes.
    You could also use the commenting tools.

  • How do I convert my pdf documents into forms which I can edit with adobe exportpdf?

    I just purchased the Adobe ExportPDF and need to know how to convert my pdf or other files into documents that I can edit.  Can someone help me with this?

    Hi Desh,
    There is no way you can edit and document with Exportpdf. Exportpdf only helps you to convert the pdf document to other formats.
    Please provide more information what is exactly that you want to perform. And what all Adobe Applications you have.

  • How to edit a PDF document in Netweaver Development Studio?

    Dear Experts,
    I am trying to edit a PDF file in the Netweaver Developer Studio.
    Can anybody tell me how can I import and edit it in the Netweaver Developer Studio?
    I am trying to do some editing.Eg. adding action buttons, adding input fields etc to the PDF file.
    If somebody has previously done such things or have some idea, I would like to hear from your experiences.
    Many thanks
    Rgds,
    Sudeep

    Hi Satya,
    Thank you for the immediate response.
      Now I can import the pdf files and edit them.
    However there is a problem.
    I can only open the pdf files which I created by the developer studio.
    When I open the pdf files those created by a scanner, they appear blank. However, when I open the same files with acrobat reader, the contects in the file appear.
    I will be very thankful if you could help me in this.
    Many thanks
    sudeep

  • How do I edit a PDF document?

    how to i edit a saved pdf document

    Hi tdsly1,
    To edit a PDF file, you need to use Adobe Acrobat. If you don't have it, you can try it for free for 30 days. See www.adobe.com/products/acrobat.html for more information.
    Best,
    Sara

Maybe you are looking for

  • Where file paths in itunes?

    I'm synching videos with my iPad. I have 2 questions 1) all my videos are on an external HD.  When I add them to the library,  where does it store the video paths? 2) I need to reformat my external HD. Do I just copy the videos back into the same dir

  • Can flash3d effect font size in some browsers?

    hello; I have an swf that has many dynamic textfields; a couple of them are inside of an mc that has been rotated in xyz-space via the properties panel; these particular tf's are not displaying correctly in some browsers. tf's are embedded. any thoug

  • Backorder Notification

    Hello, Is there a way to get a notification (SBO transaction notification??)what says "this article is put in backorder" when entering a item on a salesorder which has not enough stock?? And then a don't mean the item availability check which is alre

  • Sync To Do's to the iPhone

    When will Apple provide the ability to sync To Do's from iCal to the iPhone?

  • Quicktime Pro: poor record quality

    I've been trying to record into Quicktime Pro from my DV camera and find the resulting picture quality to be really bad (audio is fine). It's so bad it's pretty unusable. Compared to recording into iMovie the comparison is huge. Even exporting from i