After I installed 7.2 Itunes

After I installed the new Itunes 7.2 I get this
http://www.flickr.com/photos/engelking/530325401
Then I ran a network diagnostics test and I get this
http://www.flickr.com/photos/engelking/530509131
does anyone know how to fix this
The way I read this Itunes can connect to everything except the Itunes store which I guess is OK because I won't spend any money.
Does anyone have away to fix this. I have been looking trough these boards for 3 days now.

Doublechecking first:
I unsitalled iTunes and tried again, and nothing works
Where you using the following document as a guide for that? (The 7 can be produced by damage to the related software components, so the Verify iTunes and related components are uninstalled step is quite important.)
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Similar Messages

  • After yesterday installing the latest itunes upgrade 11.1.5.5 my CD drive is no longer recognized. I do not have the file afs.sys on my computer which is supposed to cause the problem. Any ideas?

    I yesterday installed the latest itunes upgrade to version 11.1.5.5. After doing so my computer no longer recognizes my cd drive Device manager states that windows cannot load the device driver, the device driver may be corrupted or missing. When I have tried to renew the driver it states the latest one is installed. I do not have the file afs.sys on my computer which is quoted as the file which causes optical drives to disappear. Any ideas

    Hi, I've managed to get my CD & ipod working now but it wasn't easy. Maybe this will help you fix it.
    This is what I did:
    The problem: OS Windows 8.1  - was working ok with itunes (not sure which version). Upgraded to 11.1.5.5 and my old ipod stopped being recognised by itunes. As I had just bought a new ipod touch 5G I didn't pay too much attention however I soon realised that the new ipod wasn't recognised either. I uninstalled iTunes & reinstalled but that didn't fix it. I found a technote (see below) that says how to get get your ipod reconised. That worked but on a a reboot I realised that there was no CD drive appearing in windows.
    It now works & this is what I did to fix it:
    Went through the apple technotes on CD issues & looked a the Gear website
    Looked for afs.sys file but didn't have that
    The registry settings for device filters looked the same as the technotes
    Device manager for CD said there were problems in the registry
    I backed up the itunes folder (I was planning on a clean install & rebuilding itunes from scratch however most people want to keep their data)
    I uninstalled itunes but that made no difference
    I rolled back to the a system restore point that had been created not long before the upgrade to 11.1.5.5
    The CD drive was now OK again
    I went into Windows update and ran the updates that were available - one was for intel chipsets
    I created a system restore point as a precaution
    I found the registry key that is mentioned in the technotes to do with CD problems and device filters and backed it up separately as a precaution
    I ran itunes (x64) 11.1.5.5
    itunes asked me if I wanted to repair or uninstall - I uninstalled
    I rebooted
    I ran install for itunes 11.1.5.5
    itunes installed ok & the CD was still there
    ipods were not recognised
    I followed the instructions http://support.apple.com/kb/TS1538 to update the driver
    5. Verify that the Apple Mobile Device USB Driver is installed - For Windows Vista, Windows 7, and Windows 8
    Update the Apple Mobile Device Driver
    I now have a CD drive & iTunes recognises my ipod again - phew
    Good luck

  • After Vista Install, cannot use iTunes

    I had to do a clean install of Windows Vista on my computer. As a result, the hard drive was wiped clean and all information on my computer was erased. After the install, I downloaded the newest version of iTunes + the Windows updates for compatability and the Windows iTunes fixes. Now, when I plug in my iPod, I get this message:
    "The iPod is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time." I then have 2 options - Erase and Sync or to Transfer Purchases. When I try to transfer purchases, it will not let me because I am "not authorized" to play them on this library.
    Can someone help?

    Probably not a broken AAS then. If it is broken badly enough to give an "itunes has stopped working" message, QuickTime typically won't launch either.
    My thoughts swing back to a font issue. Usually if a font is damaged, the iTunes error happens via the CoreGraphics.dll. For example:
    http://discussions.apple.com/thread.jspa?threadID=2302801
    Unfortunately, without a heads-up from the Problem reports about which font is/may-be damaged, checking on that possibility is going to be a pain.
    Try going into your Control panel. Do you have a "Fonts" control panel in your Windows 7? If so, go into that and try steadily opening all the fonts, one by one. Does font viewer have difficulty displaying any of the fonts? If so, which ones do you have trouble with?

  • ITunes no longer shows my iPhone after I installed the latest iTunes update.

    I agreed to install the latest iTunes update and went through all the steps including rebooting. My phone then asked if I trusted the computer and I clicked "trust". It asked again and I clicked "trust". iTunes never opened automatically and when I opened iTunes, I saw that my iPhone5 was not listed; therefore, I can no longer sync. Then I rebooted my (Windows 7) computer again and experienced the same problems. I moved my phone to a different USB port but experienced the same problems.

    I have an AT&T Uverse email account that keeps saying I have an "incorrect user name or password."
    Perhapse it's the same issue since the Uverse e-mail is through Yahoo.

  • I installed itunes on a HP mini, then after the install finished, no itunes found anywhere. Where it go?

    I INSTALLED ITUNES ON MY KIDS HP MINI. IT LOOKED LIKE ALL WENT WELL. EVEN GOT CLICK FINISH TO FINISH. WHEN I CLICKED FINISHED, IT WAS LIKE ITUNES NEVER WAS ON THE COMPUTER ANYWHERE. WHERE DID IT GO?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Go to Settings>iTunes and App stores and sing out and sing back in
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • My problems started with an error 50 message when trying to download bought films. After un-installing and downloading iTunes, a number of times, I still cannot open iTunes on my PC and keep getting the message "you do not have permission to open"

    I have removed all spyware, anti virus software and removed all iTunes programs - as suggested by Apple. I still cannot open iTunes on my PC because of the message "you do not have permission to open this file, folder"
    I have changed and checked all permissions to allow this but still get the same message.
    iTunes is located on my C drive and I now do not have the neccesary permissions to open it.

    Hey Chris-
    It has been some time since you posted this message and I see you haven't gotten any replies, but  I have the same issue and I was wondering if you figured out how to resolve it.  Hopefully you were able to figure it out. 

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • After I install itunes my windows 7 - 64 bit machine will not boot and I have to use Restore  to boot with a date before I installed itunes

    After I install itunes on my windows 7 - 64 bit machine it will not reboot and I need to restore to a date before itunes was install.  How do I fix this?

    I'm having a very similar issue, paired with iTunes not being able to get online.
    iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
    Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.    

  • HT203175 ?itunes wont open after i installed it

    itunes wont open after i installed it?

    hi Be!
    reboot your computer. open your task manager to the processes tab. now try to launch itunes again.
    b if you see an itunes.exe appear there, and persist in your task manager, try
    Lorraine M, "NIS/i-tunes problem rectified" #2, 12:51am Oct 17, 2005 CDT
    ... or, if you
    b don't
    have Norton Internet Security 2005, try:
    http://docs.info.apple.com/article.html?artnum=302386
    b if itunes.exe appears and then disappears:
    ... then there's a good chance that you've got a malware infection on your PC. post back, and we'll work out how to proceed.
    love, b

  • HT2292 hello i'm facing  problem  i downloaded iTunes version 11 32bit  and after i installing the set up when i opened the iTunes a massages  occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even  though my interne

    Hello i'm facing  problem  i downloaded itunes version 11 32bit for windows 7 and after i installing the set up when i opened the iTunes a massages  occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even  though my internet is on

    Try this...
    Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
    cmd /k netsh winsock reset
    Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
    You should get something similar to this:
    Reboot the computer and the problem should be resolved.
    If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
    tt2

  • After I downloaded and installed the latest iTunes upgrade (to 10.5.1), I am no longer able to download free app upgrades for the apps I have on my iPad/iPhone/iMac which i had previously purchased. Itunes tells me I "don't own the major versions".

    After I downloaded and install the latest iTunes software upgrade (to 10.5.1), I am no longer able to download free upgrades to the apps on my iPhone or iPad.
    The App Store just says I "don't own the major versions", which of course is nonsense. It seems as if Apple's iTunes/App Store has deleted my download history. Any suggestions?
    Regards,
    Bruce

    Actually It doesn't. It says he's on a MacBook. I don't know all the different types of Macs. I was having a ton of problems with iChat. I opened DMZ to my computer, knocked down all firewalls etc and left everything exposed, still with bad results. A few weeks ago my power supply went out on my D-Link. I bought a linksys. Since I'd left all firewalls off I figured it couldn't be the router. I power cycled everything n the netork, still no luck. Today I bought a universal Power supply and started up my D-Link Router. Everything worked perfectly. My wifes computer - a laptop running Tiger worked fine with the Linksys and did my machine before the Leopard upgrade. Now that I've got the D-Link online everythings working.
    Message was edited by: graphico
    Message was edited by: graphico

  • After I install Itunes 10.5.2 and open itunes a window opens stating another program is not allowing itunes to burn cd's. Next, I get an error window stating itunes 42404 is missing. I've uninstalled itunes 3 times and re-installed. No luck.

    After I install iTunes 10.5.2 and open iTunes a window opens stating "The registry settings used by the iTunes drivers for importing and CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." This happens everytime.
    After that on one occasion a window stated "Itunes msi) was missing. Upon uninstalling and reinstalling that disapeared. Now I get a window stating, (A required Itunes component is not installed. Please repair or reinstall Itunes.(_42404)"

    To fix registry, refer to this article:
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes

    After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX

    Have you revieved this support document?
    TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    tt2

Maybe you are looking for

  • Regarding the modifying an internal table

    hi,    i am having an internal table,i have to modify one field and the remaining fields should remain same in the internal table while displaying the internal table.    can any body send the solution for this issue. thanks in advance

  • FCP 5.02 and 5.03 HDV codec not found?

    Hi i installed a few systems but now i have a machine (G5 tiger 10.4.2 fcp 5.03 and a BM card with driver 5.1.1etc. etc. where if i try to choose easy setup it tells me Codec not found. you may be using a compression type without the corredponding ha

  • Tabs no longer remembered after upgrading to Norton 360

    My Firefox is set to remember tabs from my last session, but it no longer remembers the setting after installing Norton 360. I've checked the setting several times and have rebooted the computer several times. Hopefully you can help because all I get

  • How do I select part of a clip to import in Final Cut Pro 10.0.7?

    Greetings. I'm a newby in FCPX.  I've been watching Michael Wohl's tutorial and it looks like I should be able to mark parts of clips stored on my HD to import into the event browser.  But I don't seem to be able to mark the clips with either the "i

  • Centralized error handling class

    Hello Gurus!!! I have developed coding for transaction fb03 in module pool program using OO concepts.                Now I want to enhance my coding using centralized error handling class. ie. the errors are not shown immediately but a class captures