After I reinstalled Leopard, iMovie is nowhere to be found...

I needed to clean up my macbook because I'll need the space for work so I did a complete system reinstall using the discs that came with my mac. I selected the option to completely erase the hard drive and reinstall leopard.
Everything is great, but iMovie is nowhere to be found. I did all my updates, I've done searches through the applications window, the search bar and still no luck.
I did a "movie" search in the search bar and nothing about iMovie comes up. It's like it just disappeared.

You should be able to boot up with the Mac system disk in the drive.
When you do, instead of installing OSX, click on the upper drop down menu where it says Utilities (or something similar, it's been a while), and one option should be to install software like iMovie.

Similar Messages

  • Lost Disk space after Reinstalling Leopard

    I upgraded my Mac OS v.10.4.9 to Leopard v.10.5.1 in May and after Leopard was installed I had about 13 GB HD space left. It was lightning quick too. The new OS was v.10.5.1
    Since then I've been downloading regular Security updates as they were prompted until the OS reached v.10.5.5 but the whole thing was gradually getting slower too so I figured I would reinstall Leopard and take it back to v.10.5.1 to see if it was back to the high speed it had when I originally installed Leopard v.10.5.1.
    After I re-installed Leopard last week and it was back to v.10.5.1 it went back to running superfast again, but yesterday I started getting a notice that said I was running low on Startup disk space and I needed to delete some stuff to gain space.
    When I checked available space I have less than 1 GB, about 300MB.
    It seems that by re-installing Leopard it has been written adjacent to the 10.5.5 instead of on top of it, which I thought it would do automatically.
    I found a file named 'Previous systems' on the HD and deleted that but it screwed it up so I had to restore that and now it's back to normal but I've still got less than 1 GB disk space.
    Can anyone tell me how to delete my old operating systems (both the 10.5.5 and the 10.4.9 that I presume is still on there, which I originally upgraded to Leopard.)
    I'm a conservative user of disk space and I deleted all my photos and only gained about 20 MB of new space so I'm pretty sure the problem is the OS's are written adjacent to each other instead of on top of each other.

    Barry,
    Thank you for your help.
    When I deleted the Previous Systems file it was about 7 months after the Leopard installation.
    You are right, I did do an Archive and Install in order to maintain all my info from v10.4.9.
    The problem I encountered after I deleted the Previous Systems file was I then did a Secure Empty Trash and as it was emptying it was showing over 200,000 items and still upticking and that worried me that I had done the wrong thing by deleting the Previous Systems file.
    So I stopped the Emptying process, and did a restart, thinking my HD space may be restored if the file was indeed possible to be deleted.
    When it restarted that time, instead of the usual boot up process, there was a small flashing square box in the centre of a grey background, the small box had a blue earth in it and that went on flashing for maybe 20 minutes.
    It eventually booted up and so I went to the trash, where the now presumably slightly diminished Previous Systems file was, and I dragged that file back into the HD and re-started the machine.
    The world sign again flashed on, but this time for maybe only 10 minutes before it booted OK.
    I checked and I was back to v.10.5.1 bit still with only about 300MB Disk space.
    That's when I deleted all my photos but that only gave me about 20MB so now I'm up to about 320 MB - but as you say that is nowhere near enough.
    But I do notice a definite increase in speed using 10.5.1 compared to 10.5.5. Those Security Updates have dragged it down badly.
    Now that you have explained that the Previous Systems file may be safely deleted then I will try that again and let it run its course this time.
    I'll let you know what happens.
    Thanks again,
    ann

  • How do i save an imovie so that i can be able to edit it after i reinstall my OSX

    I really need to save this imovie that i have created into my hard disk but i also want to be able to edit it after i reinstall my OSX thing as everything will be earased from my laptop. Please help this imovie means so much to me

    Save it to your external hard drive - where you keep you backups.

  • IPhoto missing after reinstalling leopard

    After reinstalling Leopard on my new macBook, iPhoto is missing from the Applications. Has anyone any ideas how to solve this? I can't find the individual install for iPhoto either on the install disks.
    Thanks

    Terence Devlin wrote:
    so I'm buying my own copy of Leopard
    Why?
    Because the copy of Leopard she has is unlicensed if she doesn't have the install disc.
    Do I have to erase the installed one before I install my new copy?
    If 10.5 is working why are you going to re-install?
    Well, security for one. I would never, never, never use a pre-owned Mac without completely erasing and reinstalling everything from scratch. Who knows what hacks, security holes, pirated software, or other junk may have been left on it by its previous owner. We already know that the seller included a stolen copy of Leopard. Maya would be doing everything right by buying a fresh copy of Leopard and reinstalling.
    And if iphoto is going to be missing, could I install it from the Tiger disk that came with my desktop?
    System Restore Disks are particular to the model they come with. Also, it's a breach of the licence.
    That's wrong. Software on a system restore disc may be transferred to a different Mac as long as the software is no longer installed on the first Mac. And while some have reported difficulty getting OS X to install on a different model, I think it's likely that the iLife apps will work.
    If Maya has no system restore CDs for her iBook at all, she should contact the seller and demand them. If the seller told Maya that Leopard or any other Apple software is included, and then included no install discs, the seller defrauded Maya.

  • Syncing after reinstalling Leopard

    So I reinstalled Leopard, and for some dumb reason my iPod says that it normally gets synced with another library and that if I want to sync it with this one, I have to erase everything on it (which is problematic because I haven't backed it up in a month).
    I'd like to know how I can backup my setting and apps, erase my iPod, sync it with my library, and then transfer music without getting rid of all of my applications and their settings.
    Thanks a bunch,
    SeanDaBomb

    Start itunes, disable automatic sync. Connect your ipod, backup manually by right click on "ipod" in left itunes media window. This backup will contain all settings but no music or videos and you can use it to restore after your ipod was wiped the first time you synced. http://support.apple.com/kb/HT1766
    and http://support.apple.com/kb/HT1414.
    Transfer your purchases als well (File>transfer purchases)
    As you still have your itunes library on your mac, you can sync content afterwards. You can download your apps again for free http://support.apple.com/kb/HT2519 and http://support.apple.com/kb/HT1977

  • Lost imovie and iphoto after system reinstall, and couldn't find ilife DVD either

    after i reinstalled my OS system, imovie and iphoto stopped functioning -- i can still see the icons in Application, but when i tried to open them, error messages popped up. For example, for imovie, i got "The QuickTime components necessary to view, edit, import, and export several kinds of movies are not installed. These components are included with the iMovie installer; please re-install".
    i know that i should reinstall them, but the problem is: i bought my Macbook Pro in 2010, and it either came with ilife components installed, or it come with an ilife DVD (but i couldn't find it). In such a case, is there anyway to get them back without purchasing new ones?
    Thanks a lot!

    Hi Brie-
    I haven't replaced the music in my back catalog of iMovies. That would be quite a project.
    I did try a burned DVD and that played fine.
    As a test, I once again purchased a song on iTunes but I can't import it into either iMovie or iTunes.
    I'm running Quicktime 7.4.1. and not 7.5 because when I did the automatic 7.5 download all my iMoves lot sync. That wasn't the 'hang' problem, it was more like watching on YouTube where the frame rate and the audio don't match up.
    I backed up my system, erased and reinstalled. Once I came to the 7.5 update, I had the problem again. Then, I did an archive and install - OSX, ilife, and all the upgrades except QuickTime 7.5. Along the way, I tested iMovie to see how it worked.
    Instead of going all the way to 7.5, I did 7.4.1 which was the one before. My iMovies are now all in sync but, I'm not authorized to import or play. I did all the steps to reauthorize but I'm at my present impasse.
    I'm sure that if I upgrade to Quicktime 7.5, I'll be back in the YouTube out of sync mode. I also didn't reinstall any 'flip4mac' or 'Slick' software (all of which worked perfectly until the 7.5 upgrade.)
    -Ilan

  • ITunes won't open after reinstalling Leopard.

    I have just reinstalled Leopard and when I try open iTunes, it gives me the following message: "The iTunes library cannot be read because it was created by a newer version of iTunes." I have gone to the Apple site and downloaded version 8 and it still says the same thing.

    As noted - you will need to do a 'Software Update' as all the OSX programs were reinstalled with what was on the Leopard OSX Disk.
    You can try to d/l each update or let the 'Software Update' panel take care of you in System prefs. Including the latest update to OSX 10.5.6.
    MJ

  • Boot Camp partition after reinstalling Leopard?

    If I reinstall Leopard (erase and install), will it leave the Boot Camp partition intact? I don't want to reinstall Windows. Please help.

    If I reinstall Leopard (erase and install), will it leave the Boot Camp partition intact?
    Yes.
    (33946)

  • Problems after reverting to leopard

    Hi I was wondering if any one was having problems with imovies after reverting back to leopard from snow leopard?
    Snow leopard wasnt compatible with some of the programs i needed for work so I re-installed leopard from the disk provided, I then reinstalled the ilife applications (including imovies) and installed all updates. when i then open an imove project all the clips, chapter markers etc are there but when i try and watch it there is no video output, the sound from the clips is still present however.
    i also have similar problems with iDVD as projects saved in time machine wont open. nor have the themes been installed from the DVD

    Hello and welcome Cassie,
    We'll need a bit more information to be sure of the problem.
    Can you provide:
    1. A more complete description of your Mac? (model, processor, RAM)
    2. A more complete description of the kind of re-installation you performed? (Was it an archive and install?)
    You can get the Mac info by going to the Apple Menu (top left) and selecting "About this Mac" - then clicking on "More Info" in the info window which appears. You can copy-paste the above info in your reply.
    The probable reason you can't access your iMovie and iDVD projects in a Time Machine backup is that you probably ran TIme Machine - after - installing Snow Leopard. TM is designed to work "within" the OS environment and might not be able to "cross back over" to 10.5. That is just my "working theory" at the moment, others may have more correct information.
    Message was edited by: macnoel

  • IPhone won't sync after upgrading to Leopard

    My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
    I've tried everything apple suggests:
    1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
    2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
    3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
    4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
    5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

    You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
    http://docs.info.apple.com/article.html?artnum=306637

  • Motion screen is completely black after upgrading to Leopard

    Hi,
    I have opened IDVD for the first time after upgrading to Leopard and it does not work correctly anymore.
    The motion screen is in black and does not show anything (while you can hear the sound of the theme selected)
    This happens with already created projects and new projects
    All since upgraded to Leopard
    It is possible to see a movie in an already created project, if you are able to go through the menuscreens and select the movie without actually seeing anything. Than the movie is shown correctly.
    I work with the latest version of Leopard and IDVD, all on a macbook
    Hope you can help !!
    Thanks a lot
    Marco
    (A recently convert from windows to Mac, and a very happy one.)

    Hi,
    Thank you very much for your quick answer.
    I have no issues with laptop being to warm as it happens just after starting to work the computer
    I have reinstalled IDVD, made no difference
    I have run the apple´s updater.
    No external FW or USB connected
    Only two plugins for QT, both standard
    I have not tried switching accounts, as I only have one account
    Enclosed the info of the graphics card
    Intel GMA 950:
    Chipset Model: GMA 950
    Type: Display
    Bus: Built-In
    VRAM (Total): 64 MB of shared system memory
    Vendor: Intel (0x8086)
    Device ID: 0x27a2
    Revision ID: 0x0003
    Displays:
    Color LCD:
    Display Type: LCD
    Resolution: 1280 x 800
    Depth: 32-bit Color
    Built-In: Yes
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Display Connector:
    Status: No display connected
    Hopefully you can help !
    Thanks a lot
    Marco

  • IPhone wont show up in itunes after upgrading to leopard and iLife 08

    Hello:
    For some reason, my iphone does not show up on my itunes after upgrading my mac to leopard and ilife 08. The phone was syncing properly before the upgrade. I also installed all the patches that were available for downloading but I did not try syncing between the main update and patches. I am running itunes 7.6 and had been running 7.5.1 before that. My iphone is on firmware 1.1.2 and I have it set to manually sync. My ipod video is syncing fine but I had that set to automatic syncing.
    I checked the system profile and the usb is showing the iphone just fine.
    Can anybody help?

    Yup. It does work, had the exact same problem, iPhone showed in system profiler under USB, and iTunes would not recognize, reinstall fixed it all. It almost looks like a permission problem after the reinstall to where some .plist files got wrong settings set, repairing permissions might work too.

  • Time machine no longer a "timemachine" after re-installing Leopard

    Time machine worked fine on the first install but I had some network issues like not being able to connect to my iMac G5 from a Windows PC. Mac support suggested reinstalling Leopard after all other suggestions failed. Now, when Time Machine application is enabled it no longer lists a time table. Only "Today" and "Now" is shown and no times. The restore function does not work either. Disk repair utility has not been able to correct the problem and there are no Time Machine .plist files in Library preferences either. How do I correct or fix Time Machine?

    I am having similar issues with TM. After spending close to 3 hours on the phone yesterday with apple tech support and a product specialist, I was able to temporarily resolve the issue (disappearance of my external hard drive icon on the desk top and in finder). I asked the specialist if I should just disable TM and not use it until Apple provides a fix to all of the problems, but all he could say was, I can't advise you on that. I have turned TM off, but did not deleted the TM files from my external HD and the problem started again this morning. I need to go into Monitor to fix this, but forgot the codes they gave me to fix this problem, so i have to call in again!

  • Unable to print on HP J6480 after installing Snow Leopard

    After installing Snow Leopard I've been unable to print from my HP J6480.  I get an error message saying to check for updates from Apple and the manufacturer.  Apple shows no more updates.  I've added a printer driver v2.6 from Apple, but that hasn't helped.  Had no problems printing before this.  Any suggestions?

    Never mind.  Just went to Hewlett Packard site and the suggestion was to reinstall the printer.  I did so and it now works.  Of course, the reinstall wiped out other printers I had on there....Adding Snow Leopard has resulted in much more work than I thought it would be!

  • URGENT Trying to wipe and reinstall Leopard 10.5 on my 2008 imac8,1 from the disk but my hard drive doesn't show up

    So to give a little big of a background on my computer.  I got it January 2009 as a graduation gift, because I was going to get a degree in Graphic Design and Animation.  I only worked on it [mostly brousing the web, and itunes]  for about 6 months because I was taking all of my general courses for college.  I then met my boyfriend [late 2009] and moved in with him, my boyfriend has a macbook so I left my mac at my parents house.  I was only Using it every now and then and it would be idle/ or shut off the rest of the time. 
    Fast forward to fall 2011.  Me and my boyfriend live in a condo so I brought my computer over because I am now taking graphic design courses and need my computer.  I installed a free 30 day trial of adobe cs5.5.  It made my computer kind of slow and it froze alot even though I still have over 250gb's of memory in it.  After the trial ended I kind of stoped using my computer again,  rather installing the free trials of cs5.5 on my mom and my boyfriends macs until I had enought money saved up to buy it.
    Here's where it gets tricky.
    So now its March 2012 and I tried uninstalling the trial of cs5.5 on my computer since it was just taking up un needed space.  I had to uninstall all of the programs one at a time other wise it would freeze up.  I have had to hold the power button down to get it to turn off because i couldn't even move the mouse even after waiting a while.  Anyhow I get to the last program and it keeps freezing, I tried shutting down my computer via<apple< shut down. But when I start it up again I got a file with a question mark flashing on my screen.  So I looked up how to fix that and had to locate where to start up [I selected my hard drive] then I was able to get on to my computer.      
    So then I go to disk utilitys and do a repair on my internal hard drive to fix if there were any messed up files. After the files are repaired I figure I'll restart it and let everything get up to date.  When I do I get the gray screen with the apple and the spinning wheel.  This happens OVER and OVER.  I tried soft reseting it, manually turning off the computer, you name it.  But it still keeps happening.  So I figure I'll just wipe it clean and reinstall the whole thing. [I have it backed up on an external drive]
    I try to reinstall leopard 10.5 from the disk that came with my computer, all goes well until I gets to the 3rd screen where you select where to save it to, my hard drive doesn't show up.  But if I connect my external hard drive it shows up right away.  I try seeing if it pops up on disk utility, and it doesn't show up there either. 
    Is it possible that my hard drive is shot?  I haven't really used my computer that much.  Its pretty much sat at my parents house for 2 of the 3 years I've had it.  So its not like I used it a whole lot. 
    Help! I'm a college student who needs her mac now more than ever for my design classes!

    The battery alone is a $5 to $15 part.  Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more.  This article discusses the varying successes of third party drives on iMacs:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs 
    The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

Maybe you are looking for

  • Photos not appearing in Screensaver or iWeb

    I have several thousand photos in my iPhoto 9 library, all organized in folders.  When I go into System Preferences and try to designate my photos as the screensaver, none of the iPhoto folders appears on the list of options.  Furthermore, when I ope

  • Production monitor question?

    I'm working with a vendor, putting together a post set-up with FCP Studio 2. I told him I needed a production monitor. Originally, he suggested a Panasonic BTLH1700W but then got us a Dynex HD TV off the shelf to save money. Can you really just use a

  • Dynamic PL/SQL IR Highlight

    Hello Forum User, I have an IR and a filtering select-list item to choose a specific month. Depending on the selection of the select-list item the report values change. The column values have a timestamp format like YYYY-MM-DD HH24:MI:SS. I manually

  • DataGrid, e4x format, and sorting

    Hi there, I have an Http service "<s:HTTPService ... resultFormat="e4x" >" that return XML as you can tell by the 'e4x'. Let's assume I get something back like: "<rows><name>joe</name><age>20</age>....<name>mike</name><age>11</age></rows>". Results a

  • Backup SQL database by php mssql driver ERROR

    SQL QUERY backup database baza_programu to disk='d:\arh\baza_programu.bak' In SQL Server management studio it's OK. Processed 2840 pages for database 'baza_programu', file 'baza_programu' on file 1. Processed 2 pages for database 'baza_programu', fil