After I reset PMU, my power light turns on ... but nothing else

My computer was shutting down today intermittently
actually it has been doing this for a month now, on and off
so today I opened it up and thought I was doing the right thing by pushing that reset PMU button
but now when I plug it back in
the power light is bright but wont do anything else
even when I hold it down
it wont power off like it should
any thoughts here ?

That button should be pressed as part of procedure in these two documents.
http://support.apple.com/kb/HT1436
http://support.apple.com/kb/HT1939
There are two because I don't know which model Power Mac G5 you have. If you have the earlier model and did not unplug everything when you pressed the button last time, I think that is an important part of the procedure. Since you already pressed the button once, you may want to use the alternate method of disconnecting everything and leaving it unpowered for a few minutes before reconnecting. When you reconnect the power, initially connect just the keyboard and mouse (leave the other peripherals off) when you try to start it up.

Similar Messages

  • My Sony Vaio Model PCG-61611L LED Green Light Turns on but nothing else happens

    When I turn on my Sony Vaio Model PCG-61611L, the green LED light goes on, but nothing much happens. The laptop is from 2010 and is never abused, so I do not know what has happened. It just started doing this on occasions and now I can't turn it on at all. Any suggestions?

    RESOLUTION, PROBLEM SOLVED!! Hopefully everyone that has been working on this problem for a number of years, found the answer.Thought the problem was the BIOS. Went to Sony's Website, entered the Model Number, and of course you have to have a ****** Jack Decoder Ring on to figure out your Model Number.  But once youmanuever through that hurdle, download the BIOS update for your specific Model Number Unit.  Follow the directions, it will install once you have downloaded. Basically Shut the System down after that,Wait the 60 seconds, turn on. My unit performed two Memory Tests, both check ok. Reboots to desktopLogin. Then for the Grand Finally, shut the system down once more.  And finally, with out doing any two or three finger salutes.. my PC boots up again like normal.  

  • Satalite Pro Power lights come on but nothing else ??

    Hello All,
    A quick question. Have been given a Satalite Pro. The Power lights up but nothing else.
    I've tried the HDD in my Portege m200 and its running XP Pro. The Satalite Pro has 1 > 512 ram stick inside.
    The overall condition is good and i'm tempted to spend a few shillings to try and bring it back to life or are we talking major surgery.
    My knowledge is basic so would have to pass on to get fixed.
    Would welcome your thoughts / suggestions.
    Thanks
    Neil

    Hi
    I dont know which Satellite Pro you have exactly but if your Portege M200 uses the same RAM modules, you should try this to exchange them. Sometimes the notebook doesnt start due faulty RAM modules. They are exchanged in few minutes and not expensive.
    I doubt that the HDD would be the problem. If the HDD doesnt work, you able to access the BIOS at least.
    In worst case its related to other expensive parts like CPU or mainboard. :(

  • My iPad 1 apps keeps crashing. I have closed all running background apps,reset by holding power and home buttons but nothing works. Please its starting to get very frustrating and annoying.

    My iPad 1 apps keeps crashing. I have closed all running background apps,reset by holding power and home buttons but nothing works. Please help its starting to get very frustrating and annoying.

    What exactly do you mean by "crashing" and is it occuring on a specific app or under specific circumstances?

  • Pavilion G2-b27SA Laptop Won't Boot - Fan Whirs and Hard Disk Light Comes On but Nothing Else

    Hi
    My Pavilion G2-b27SA laptop won't boot. The fan whirs, the hard disk and wirless lights come on but nothing happens on-screen and the fan goes quiet after a couple of seconds (to a low whir).
    I've gone through and tried the solutions in this thread - http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g​-Windows-8/Laptop-will-not-turn-on/td-p/102825 - with no luck. Specifically, I've tried a hard reset and hitting F10 when the laptop tries to boot. Neither has had any effect.
    Is there anything else I can try to get the computer working again? If I take it to a laptop repair shop (I'm out of warranty) will they be able to do anything, or is it effectively dead now? 
    Thanks in advance for your help.

    The laptop can always be fixed if you have a bottomless wallet. On a no-start with flashing lights it is likely the motherboard and a motherboard replacement if you have the shop buy the board and bill you for labor will be about $300 give or take 25%. Before we give up, it could be bad memory or a few other less expensive things. Assuming they do not charge too much just to diagnose it; take it to the shop.

  • Hard disk turns on but nothing else

    Hello, I'm a teacher running a lab full iMacs and I have one giving me problems. When I press the power button I can here the hard disk (or something inside) start running but nothing else happens; no start up tone, no display, nothing. So far I have tried putting the install disk in and holding "C" but this gave me zero response and now the disk won't eject. I have, if I am remembering the terms correct, tried reseting the the SMU and SMC and still got nowhere. Any help someone can give me would be greatly appreciated!
    God bless!

    HI and welcome to Apple Discussions...
    Try starting up in single-user mode and then running fsck:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    Carolyn

  • Toshiba equium a100-147- light turns on but nothing happens - HELP

    My mum has a toshiba equium a100-147, and it doesn't appear to want to turn on. 
    The power light sometimes only comes on very dim when you pess the power button, other times it comes on bright. 
    I've tried unplugging the HDD and putting it back in, tried it with just one of the each sticks of ram in, checked that it's just a screen issue by plugging it into an external HDD, all with no luck. I did even unplug and plug the screen into the laptop itself just incase the cable came a bit loose. 
    Basically though, it does turn on, like the fans and the light comes on, but absolutely nothing else happens. The screen doesn't turn on at all.
    Anything I can do?

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region. If it's a European model, you could check the Toshiba Europe forums.
    - Peter

  • 2010 Mac book pro, every time I do something remotely straining, i.e. open up league of legends, screen goes black, power light stays on but nothing works. Its been doing it since I downloaded lion, I just want to know how to resolve it? Come on apple.

    I’m going into my third year of graphic design and I’ve had this laptop since mid 2010. I can’t use any of my adobe programmes fluently without it shutting down or play any games. I'm 2 grand into my overdraft and don’t come from a wealthy background, I saved up for about 2 years to get the laptop to help me with my studies and I certainly didn’t pay nearly 2 grand for something that looks nice that I can go on Face book on.
    I’ve looked at various threads and posts and it seems lots of people have the same problem but no resolution. Please don’t comment if you have the same problem because I’m trying to get this sorted out not build a group of friends with **** laptops. I think this problem needs to be addressed and apple need to stop ******* ignoring the minority of 2010 Mac book owners that haven’t got a heavy back pocket to fix the glamorised laptop when it ***** up after a year of buying it. Its supposedly a high powered machine, I shouldn’t have to cack myself every five minutes over whether opening a certain programmes going to shut down my computer. Its affecting my education and patience.
    This is the error message that occurs about 8 times a day when it does it. Surely someone can make sense of it.
    Interval Since Last Panic Report:  74882 sec
    Panics Since Last Report:          2
    Anonymous UUID: C2EACECC-F8B9-4762-8CEE-F3A9B9FE756A
    Fri Jun 15 18:29:27 2012
    panic(cpu 0 caller 0xffffff7f80918947): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff809f006000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 0), Frame : Return Address
    0xffffff807b8132b0 : 0xffffff8000220792
    0xffffff807b813330 : 0xffffff7f80918947
    0xffffff807b8133c0 : 0xffffff7f80a08aa4
    0xffffff807b813410 : 0xffffff7f80a08b64
    0xffffff807b813470 : 0xffffff7f80cb5749
    0xffffff807b8135b0 : 0xffffff7f80a27bed
    0xffffff807b8135e0 : 0xffffff7f809222c2
    0xffffff807b813690 : 0xffffff7f8091dbc4
    0xffffff807b813880 : 0xffffff7f8091f7c9
    0xffffff807b813960 : 0xffffff7f817c4130
    0xffffff807b8139a0 : 0xffffff7f817d3790
    0xffffff807b8139c0 : 0xffffff7f817ef3f4
    0xffffff807b813a00 : 0xffffff7f817ef459
    0xffffff807b813a40 : 0xffffff7f817d7605
    0xffffff807b813a90 : 0xffffff7f8178df6f
    0xffffff807b813b10 : 0xffffff7f8178c9e0
    0xffffff807b813b40 : 0xffffff7f81792435
    0xffffff807b813b70 : 0xffffff800065553d
    0xffffff807b813be0 : 0xffffff80006558dc
    0xffffff807b813c40 : 0xffffff800065609b
    0xffffff807b813d80 : 0xffffff80002a3f08
    0xffffff807b813e80 : 0xffffff8000223096
    0xffffff807b813eb0 : 0xffffff80002148a9
    0xffffff807b813f10 : 0xffffff800021bbd8
    0xffffff807b813f70 : 0xffffff80002aef20
    0xffffff807b813fb0 : 0xffffff80002daa33
          Kernel Extensions in backtrace:
    com.apple.NVDAResman(7.1.8)[560E1257-BF5E-3B0B-95F0-15033A0D1B97]@0xffffff7f808 b8000->0xffffff7f80b91fff
    dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80843000
    dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f808a6000
    dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f8086e000
    com.apple.nvidia.nv50hal(7.1.8)[7596DB8C-AE9D-3C87-B11A-0ED8F940CAF8]@0xffffff7 f80b92000->0xffffff7f80eb3fff
    dependency: com.apple.NVDAResman(7.1.8)[560E1257-BF5E-3B0B-95F0-15033A0D1B97]@0xffffff7f808 b8000
    com.apple.GeForce(7.1.8)[00925AF3-22EE-3858-8BD3-06AE57DFCC86]@0xffffff7f817750 00->0xffffff7f81834fff
    dependency: com.apple.NVDAResman(7.1.8)[560E1257-BF5E-3B0B-95F0-15033A0D1B97]@0xffffff7f808 b8000
    dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f808a6000
    dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80843000
    dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f8086e000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 1415238441194
    last loaded kext at 45731121681: com.apple.driver.AppleHWSensor            1.9.5d0 (addr 0xffffff7f81e97000, size 28672)
    last unloaded kext at 376926463799: com.apple.driver.AppleUSBUHCI            4.4.5 (addr 0xffffff7f8109d000, size 65536)
    loaded kexts:
    com.manycamllc.driver.ManyCamDriver            0.0.9
    com.apple.driver.AppleHWSensor            1.9.5d0
    com.apple.filesystems.autofs            3.0
    com.apple.driver.AppleMikeyHIDDriver            122
    com.apple.driver.AppleHDA            2.2.0f3
    com.apple.driver.AppleUpstreamUserClient            3.5.9
    com.apple.driver.AppleMCCSControl            1.0.26
    com.apple.driver.AppleMikeyDriver            2.2.0f3
    com.apple.driver.AudioAUUC            1.59
    com.apple.driver.AGPM            100.12.42
    com.apple.driver.AppleIntelHDGraphics            7.1.8
    com.apple.driver.AppleIntelHDGraphicsFB            7.1.8
    com.apple.driver.SMCMotionSensor            3.0.2d6
    com.apple.driver.AppleSMCPDRC            5.0.0d0
    com.apple.iokit.IOUserEthernet            1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager            4.0.5f11
    com.apple.driver.AppleSMCLMU            2.0.1d2
    com.apple.Dont_Steal_Mac_OS_X            7.0.0
    com.apple.driver.AudioIPCDriver            1.2.2
    com.apple.GeForce            7.1.8
    com.apple.driver.ACPI_SMC_PlatformPlugin            5.0.0d0
    com.apple.driver.AppleMuxControl            3.0.16
    com.apple.driver.AppleLPC            1.5.8
    com.apple.driver.AppleUSBTCButtons            225.2
    com.apple.driver.BroadcomUSBBluetoothHCIController            4.0.5f11
    com.apple.driver.AppleUSBCardReader            3.0.1
    com.apple.driver.AppleUSBTCKeyboard            225.2
    com.apple.driver.AppleIRController            312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless            1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib            1.0.0d1
    com.apple.BootCache            33
    com.apple.iokit.SCSITaskUserClient            3.2.0
    com.apple.driver.XsanFilter            404
    com.apple.iokit.IOAHCISerialATAPI            2.0.3
    com.apple.iokit.IOAHCIBlockStorage            2.0.3
    com.apple.driver.AppleSmartBatteryManager            161.0.0
    com.apple.driver.AppleFWOHCI            4.8.9
    com.apple.driver.AirPort.Brcm4331            530.4.20
    com.apple.driver.AppleUSBHub            4.5.0
    com.apple.iokit.AppleBCM5701Ethernet            3.1.2b2
    com.apple.driver.AppleEFINVRAM            1.5.0
    com.apple.driver.AppleAHCIPort            2.3.0
    com.apple.driver.AppleACPIButtons            1.5
    com.apple.driver.AppleUSBEHCI            4.5.8
    com.apple.driver.AppleRTC            1.5
    com.apple.driver.AppleHPET            1.6
    com.apple.driver.AppleSMBIOS            1.8
    com.apple.driver.AppleACPIEC            1.5
    com.apple.driver.AppleAPIC            1.5
    com.apple.driver.AppleIntelCPUPowerManagementClient            193.0.0
    com.apple.nke.applicationfirewall            3.2.30
    com.apple.security.quarantine            1.3
    com.apple.driver.AppleIntelCPUPowerManagement            193.0.0
    com.apple.kext.triggers            1.0
    com.apple.driver.DspFuncLib            2.2.0f3
    com.apple.driver.AppleSMBusController            1.0.10d0
    com.apple.iokit.IOSurface            80.0.2
    com.apple.iokit.IOSerialFamily            10.0.5
    com.apple.iokit.IOFireWireIP            2.2.4
    com.apple.driver.AppleHDAController            2.2.0f3
    com.apple.iokit.IOHDAFamily            2.2.0f3
    com.apple.iokit.IOAudioFamily            1.8.6fc17
    com.apple.kext.OSvKernDSPLib            1.3
    com.apple.driver.ApplePolicyControl            3.0.16
    com.apple.driver.AppleSMC            3.1.3d8
    com.apple.driver.IOPlatformPluginLegacy            5.0.0d0
    com.apple.driver.AppleSMBusPCI            1.0.10d0
    com.apple.driver.AppleGraphicsControl            3.0.16
    com.apple.driver.IOPlatformPluginFamily            5.1.0d17
    com.apple.driver.AppleBacklightExpert            1.0.3
    com.apple.nvidia.nv50hal            7.1.8
    com.apple.NVDAResman            7.1.8
    com.apple.iokit.IONDRVSupport            2.3.2
    com.apple.iokit.IOGraphicsFamily            2.3.2
    com.apple.driver.AppleUSBBluetoothHCIController            4.0.5f11
    com.apple.iokit.IOBluetoothFamily            4.0.5f11
    com.apple.iokit.IOSCSIBlockCommandsDevice            3.2.0
    com.apple.iokit.IOUSBMassStorageClass            3.0.1
    com.apple.driver.AppleUSBMultitouch            227.1
    com.apple.iokit.IOUSBHIDDriver            4.4.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice            3.2.0
    com.apple.iokit.IOBDStorageFamily            1.6
    com.apple.iokit.IODVDStorageFamily            1.7
    com.apple.iokit.IOCDStorageFamily            1.7
    com.apple.driver.AppleUSBMergeNub            4.5.3
    com.apple.driver.AppleUSBComposite            4.5.8
    com.apple.iokit.IOSCSIArchitectureModelFamily            3.2.0
    com.apple.iokit.IOFireWireFamily            4.4.5
    com.apple.iokit.IO80211Family            420.3
    com.apple.iokit.IOEthernetAVBController            1.0.1b1
    com.apple.iokit.IONetworkingFamily            2.1
    com.apple.iokit.IOUSBUserClient            4.5.8
    com.apple.iokit.IOAHCIFamily            2.0.8
    com.apple.driver.AppleEFIRuntime            1.5.0
    com.apple.iokit.IOHIDFamily            1.7.1
    com.apple.iokit.IOUSBFamily            4.5.8
    com.apple.iokit.IOSMBusFamily            1.1
    com.apple.security.sandbox            177.5
    com.apple.kext.AppleMatch            1.0.0d1
    com.apple.security.TMSafetyNet            7
    com.apple.driver.DiskImages            331.6
    com.apple.iokit.IOStorageFamily            1.7.1
    com.apple.driver.AppleKeyStore            28.18
    com.apple.driver.AppleACPIPlatform            1.5
    com.apple.iokit.IOPCIFamily            2.6.8
    com.apple.iokit.IOACPIFamily            1.4
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.198.4.20)
    Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Optical USB Mouse, 0x046d  (Logitech Inc.), 0xc016, 0xfa140000 / 6
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    To operate your computer with an external monitor attached and the display closed:
    1 Connect a USB keyboard and mouse to your MacBook Pro.
    2 Connect the power adapter to the MacBook Pro and a power outlet. Check that the power adapter light is on.
    3 Close the MacBook Pro display to put the computer to sleep.
    So when your lid is closed your laptop  goes to sleep. This is expected behavior.

  • Turns on but nothing else

    I inherited a Dual 1GHz mirrored drive door G4 and when I push the power button, it starts up but that's all. Nothing on the monitor. The fans do get rather loud after about 30 seconds. I tried booting from the installer CD by holding down the c key and nothing again. I don't get the startup chime either. I sure hope it's not the logic board. Anyone have any help for me?
    Thanks,
    Steve

    Try to reseat your memory. Also try resetting the motherboard. If I remember correctly there is a small push button switch on the motherboard itself. I this doesn't work start while holding down the firmware load button. This may also help. Without even getting to the startup chime you probably can't get to open firmware. But if you can, try the following;
    Start computer while holding down [Option][Apple][P]and [R]. When the command prompt comes up type "set-defaults" press return. It should respond with an "ok" next type "reset-all" This will restart the computer.
    If these procedures don't work you may need to have your power supply tested. There are several status leds on the motherboard that can be used for diagnostics. If you have the manual for the computer these can reveal hardware issues.
    Hope this helps.
    Best Regards,
    David Finell

  • My itouch is frozen - turn on but nothing else happens

    Any suggestions on what to do?
    Battery is fully charged but not responding.
    Last time live was listening to music after being online???
    Thank you.

    Have you tried resetting your iPod:
    Press and hold both the Sleep/Wake button and the
    Home button for at least ten seconds, until the Apple logo appears.
    Next would be to restore via iTunes

  • HOW DO I NO IF MY COMPUTER IS RECONISING MY IPOD I PLUG IT IN THE IPOD TURNS ON BUT NOTHING ELSE HAPPENS

    PLEASE HELP ME

    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X
    Typing in all caps indicates shouting, is considered rude, and is difficult toread.  Many will not read such posts.
    Please turn off your caps lock

  • When I press the power button, the screen turns on but nothing shows up., When I press the power button, the screen turns on but nothing shows up., When I press the power button, the screen turns on but nothing shows up.

    I press the power button + the laptop turns on but nothing else happens. The screen also turns on but it's blank.

    I have now the same problem with 2 bords of this.
    I've a friend with one, that we turn it on an all systems seems to work but the screen don't turs on and the d-led ligts turns reed. After that i take off al cards and trie to starts and the problem as still the same. Acording to D-led lights, this means a processor's fail. I take off the the processor to my board and it start's normaly, i've worked whith that all night without any problem. After that i change my board with the other, put all cards, and when i starts,... the problem perssists. (sorry my english). I putt the other board in my case, with my cards, and turn the system on, and was doing the same. I take off the 2 bords, putted them in a tabel, just with prossessor's, AGP Card, one DDR, my disk and clear CMOS, and when i start's all 2 continuos with the same problem, ?(  i take off the AGP Cards, and the 4 ledds turn reed again and the problem was the samne. Now i ask, WHAT THE HELL CAN I DO, did i broke my board too, who can i fix this. I can´t change the bios version they don't start. The first was running well, until my friend chenge to a Termaltake Volcano cooler, after that, start´s with this problem. My board was working fine until i change to is case. What i can possíbel have done wrong????? ;(  ;(  ;(
    What can i do to fix this 2 problems.
    Thanks to all that read all this,  

  • When someone calls me on Ichat my camera turns on and nothing else happens

    I just recently got a macbook pro and whenver someone trys to VC me my camera turns on but nothing else happpens PLEASE HELP!!!!!

    HI,
    If you do not see a Visible Invite to Accept  then check if you are using the Auto Accept AppleScript
    If you are turn it Off.
    (iChat Menu > Preferences > Alerts > change the top drop down to Video Invite > check AppleScript option)
    9:15 PM      Saturday; June 16, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video.

    my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video. 
    Any Suggestions?

    Restart the computer.

  • My iPhone 4S screen is suddenly not reacting.  The screen has turned a light blue color but nothing is happening. I have tried several things such as holding the power button, plugging it into the wall, and plugging it into my computer. What should I do?

    My iPhone 4S screen is suddenly not reacting.  The screen has turned a light blue color but nothing is happening. I have tried several things such as holding the power button, plugging it into the wall, and plugging it into my computer. What should I do?

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

Maybe you are looking for

  • Split valuation while Valuation is on Company Code Level

    Dear Experts I have tested before the split valuation while valuation is the plant level ... the problem now that the FI consultants need to work with valuation on company code level .. I have activated the categories for the company code , but When

  • Can I execute a query against an already populated RowSet object?

    Hi, Is it possible to query an already retrieved RowSet object? Something like "search within results" feature that many search engine posses . Thank you in advance, Kostas

  • Difference between EP and Web AS JAVA

    Hi all, I am new to EP. I wish to know the clear differences, if any. I work in a project where there is an enormously complicated landscape. There is a 'central portal' (EP 7.0); services from backend ABAP systems are accessed. Every ABAP system (EC

  • Test webi report for Mobile (iPad) with Xcode in a Mac

    Hi everyone, I need to develop some reports which will be visualized in an iPad. I'm using a VM with Mountain Lion + Xcode. I know that Xcode is widely used by Mac developers. What I'm trying to achieve is the following: 1) Develop some webi reports

  • Table for User telephone num

    Dear Experts, I want the table to get the Telephone phone number of all users to send an SMS. Actuall i am getting the telephone number of a user from "BAPI_USER_GET_DETAIL". But i want all user phone numbers at a time. For that i need  table to get