After I set a repeating alarm clock to off, it goes back to on after a few seconds.

After I set a repeating alarm clock to off, it goes back to on after a few seconds. What is happening and how do I fix it? I have an iPod touch, 4th generation, iOS 5, no jailbreak whatsoever.

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

Similar Messages

Was setting up my ipad, turned it off. Came back turned it on and after you select ur country step it came up with "connect to itunes" logo, how do i fix this? And i dont have a computer.?!

Was setting up my ipad, turned it off. Came back turned it on and after you select ur country step it came up with "connect to itunes" logo, how do i fix this? And i dont have a computer.?!

Reboot the computer then try placing the iPod in Recovery mode and then restoring via iTunes.
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

Each camera needs a specific camera raw version (ACR). And each ACR is tied to a specific version of PS. See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode".

It only does this on Reading Rainbow DVDs so far: Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode". It does this whether the laptop is plugged in or is using battery power. How do I get it to play all?? Thanks.

Turns out it was NOT the software or the Mac. I bought a portable DVD player and this problem happens with it, too.

Lion goes back to sleep after 40 seconds.

If I wake up Lion with a keystroke - and then do nothing - Lion goes to sleep again after about 40 seconds. I have settings at 10 minutes.
Ok - I can live with that. BUT - if Lion wakes up with timer (alarm) - you can do automatic wake up settings in SystemSettings - it also goes to sleep again after 40 seconds. This means that my sceduled backup 4 in the morning never executes - 'cause my backup program (Personal Backup) is just about to start when Lion goes to sleep again.
So - the possibility to set automatic wake-ups in SystemSettings is not useful - if no one is at the computer and start to write or move the mouse Lion will go to sleep in 40 seconds again. Do anyone else here experienced the same? I would like to figure out if it is MY LIon or if it is a general bug in Lion. Thanks.

This happens rarely but consistently! I't seems to happen about 5% of the time waking from sleep. It MAY be more prone to happen if I had been moving with it in my bag, but it can happen at any waking time after any duration of sleep.

Re: Satellite L40-18X PSL48E: brightness goes back to max after every reboot

Hello,
i have Satellite L40-18X, short model: PSL48E
bought it with Vista, the bios is version 1.70.
There is very annoying problem with the brightness regulator of the display:
Every time i restart the Vista OS the brightness is set to Maximum and i have to switch it back to smaller brightness.
By hibernating the OS there is no problem - brightness is just fine as i leaved it - the same percent.
The Fn keys + F6 and F7 are working fine, in OS and in BIOS - everywhere, but after i start the OS the brightness is on the highest level
Absolutely the SAME problem is in windows XP (with the same bios 1.70) - Fn keys are working fine, but when os starts - brightness is always on Max level, by hibernating is OK.
Can you give me suggestion?
Now i don't want to reflash the bios, because on the website there is older version 1,60 for Vista and i cannot have the mine version.
Appreciate any help :)

You are right, the power profiles in vista have brightness regulator, and from there
the problem is fixed :) Thanks.
Now stays the Windows XP sp2 with the same brightness problem. All drivers are working
- wlan, sound, everything - I've downloaded the xp drivers from the site.
I installed these:
1)ATK Hotkey Driver\2ksetup.exe
2)ATK Hotkey Utility Driver\Setup.exe
-hotkeys are working, but same problem by reboot of OS - brightness @ Max level
I checked what apps start automatically - D:\Program files\ ATK Hotkey\Hcontrol.exe
starts - it is responsible for the hotkey menu. I tried with and without this app -
but no fix. Any other suggestions? (In power profiles of Win XP there are no settings
for brightness :( ) Will the problem be fixed if i install the XP bios, because as I said I doesn't want to install another version, because i will loose my "new" 1.70 bios
(not available for download)?

IPhone turns off often, turns back on only after reset, tried all troubleshooting and still nothing. Does anyone know what could be causing this and any ideas on how to fix it?

My iPhone 4s shuts down at least once a day, usually after I used it or when I'm not using it at all. It will not turn back on unless I reset it (by pressing home/power buttons) and when it turns back on, it runs like nothing happened. I have tried everything I can think of, update iPhone software, iTunes software, troubleshoot on Apple's Support page and reading other user's issues but I haven't seen anything similar. I erased and restore factory settings several times, made different backup attempts and even restored from recovery mode with iTunes. Everything goes great, no error message or anything unusual, until phone is off again, very frustrating. It doesn't seem to have a pattern to it, it happened when no apps were running as well as when a few apps were. The only thing I can think of is I haven't seen this happening when charger cable is plugged it. I don't really care about apps and content on the phone, but my contacts and voicemails are the only reason why I absolutely have to restore from backup, even after setting up a new phone, from iTunes. Other than that phone is brand new, battery is also great, nothing wrong with it (apparently).
I would like to know if somebody knows what this could be, and any ideas on how to fix it. Thank you.

Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao.

I need to combine 2 sets of bookmarks in one computer. One set was just replaced -- how do I get it back and add it to the second?

I am combining the contents of 2 computers into one new computer. I did a file transfer from the first, which transferred all of my bookmarks and passwords; when I did a file transfer from the second, it replaced the bookmarks and passwords that had already transferred. I want BOTH sets together as one Bookmark list in my new computer. How do I find the set that has just been replaced and add it to the second transfer?
One last thing -- I can still access the computer from the second transfer, but the first has been wiped clean. I wish I had known that the bookmarks would be replaced before I did the second transfer.

Keep this in mind, when you are restoring a JSON backup it will '''replace''' existing bookmarks (same thing with swapping in a places.sqlite file). When you '''import''' in HTML format, those bookmarks will be '''appended''' to the existing bookmarks.
I think what you need to do is to recover the backup from just before you attempted to add the second set of bookmarks - hope that Firefox automatically backed them up before you replaced them (very strong probability that was done '''if''' you closed Firefox between the two restorations, but if you didn't close and restart Firefox between those actions it may not have happened). That should give you the bookmarks from the first PC that is wiped clean. - https://support.mozilla.com/en-US/kb/Lost+Bookmarks#w_restoring-bookmark-backups
Then do an '''export''' into HTML format on the 2nd PC that is still operational. '''Import''' that bookmarks.html into the PC you are working on, to add them to the existing bookmarks. <br />
Bookmarks > Organize Bookmarks -> Import & Backup - Export HTML... - to a USB stick <br />
'''''then''''' <br />
Bookmarks > Organize Bookmarks -> Import & Backup - Import HTML... - from file on that USB stick

FF36: Sites with background image flickers/flashes when going back to tab after 2 minutes.

Figure I'll mention this here as well.
When viewing websites with background images, such as twitter.com or my own website at www.markheadrick.com and I change to another tab for 2 minutes (this amount of time is repeatable anyway) I get a flicker of a black background before the page is fully drawn. If I have multiple tabs with the same background image, only the first tab will show the flicker. It's like it's loosing the image in memory or something. It has done this with Firefox in Safe Mode and with a new, clean profile. It has also done this with Hardware Acceleration off.
Windows 7 Pro 64bit w/ NVidia 550ti and 314.22 drivers. Newer drivers are more problematic which is why I have stayed with these.
Again, only pages with background images seem to show this flicker. Did not happen with Firefox 35 on my system.
I created a bug for it here: https://bugzilla.mozilla.org/show_bug.cgi?id=1137082
Thanks,
Mark H

I tried, but could not see and problem.
Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

A few days ago(after a system restore) the firefox 15.0.1 crashes every time i opened(in a few secondes or in 1-2 minutes)

a few days (after a system restore )the firefox 15.0.1 chrashing and freezing every time i open it.in a safe mode i dont have any problem ,but i cant find if blame any addon or anything else.im unistalling and reinstall the update or older version(14 ,15.0)but the problem remain.what can i do?i have win 7 ultimate

If the problems arose after a restore from a Windows restore point you may need to resort to reinstalling Firefox, as sometimes Windows restores have been known to break Firefox.
Security software including Firewalls is another problem that can slow Firefox or cause it not to work. You need to ensure the security software recognises the current version of Firefox (Again I wonder if a Windows restore may have affected this also.)
* [[Configure Windows Firewall to allow Firefox access to the Internet]]
*also see [[Firefox hangs or is not responding - How to fix]]
If you are getting crashes are you able to provide the Crash IDs for a couple of recent crashes.
* see [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] <br/> they can be found by navigating to about:crashes
Also see
* [[Firefox does not work - Common fixes to get you back up and running]]
*[[Configure Windows Firewall to allow Firefox access to the Internet]]
Apparently you say there is no problem in Safe Mode, if so try Firefox with Hardware Acceleration off, if that helps then instead of leaving it off look at your graphics drivers.
* see [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems#w_turn-off-hardware-acceleration]]_turn-off-hardware-acceleration
* maybe your graphics driver rolled back on the restore, and needs reinstalling see [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

After waking rMBP from sleep and typing password, rMBP goes back to sleep after a few seconds and won't wake for about 7-8 seconds.

Absolutely embarrassing. What is going on here? When will we see a fix?

This happens rarely but consistently! I't seems to happen about 5% of the time waking from sleep. It MAY be more prone to happen if I had been moving with it in my bag, but it can happen at any waking time after any duration of sleep.

Laptop goes back to sleep after closing and opening lid

When I close the lid to put the computer to sleep and then reopen the lid, the computer comes back on briefly and then goes back to sleep. It will come back on if I unplug the SafMag. I've reset the SMC following the on-line instructions; I currently have SMC firmware 1.41f2.

Any advice?
Sounds like you need to take it in to an Apple Store.

Going back to mirrored after booting unmirrored - Solaris 10 x86

Folks,
On one of my Solaris 10 x86 servers at the last reboot it failed to come up. I put back the versions of /etc/vfstab and /etc/system from before the boot drive was mirrored. "metastat" still reports the md versions of the slices are still in sync but I'm not convinced that's accurate since the failed reboot.
How do I go back to mirrored again at the next boot?
I've been reading doc 819-2789 "x86: How to Create a RAID-1 Volume From the root ..." and it looks like I need to go through most of the steps.
My best guess goes something like this -
Loop for each mounted slice - Use metadetach to remove the one not mounted. Use metaattach to add it back. Use metasync to confirm the mirror synced up again.
Once that loop has completed assume that any MBR stuff is broken. A bit like I've done with "mkboot" on SPARC but following the steps in the doc. Look at menu.lst, fdisk, installgrub, metaroot, have with and without mirror copies of /etc/vfstab and /etc/system ready just in case, reboot.
Basically all of the steps from the doc only instead of using metainit use metadetach, metaattach, metasync.
Does this make sense? It parallels stuff I've done on SPARC but I have a lot more experience on SPARC than on X86.
Thanks in advance, Doug Freyburger

freyburgerd wrote:
Folks,
On one of my Solaris 10 x86 servers at the last reboot it failed to come up. I put back the versions of /etc/vfstab and /etc/system from before the boot drive was mirrored. Exactly how you did that may matter.
"metastat" still reports the md versions of the slices are still in sync but I'm not convinced that's accurate since the failed reboot.You're absolutely correct. As soon as you write (or mount read/write) to one of the raw slices or to one of the sides of the mirror, the mirror will be out of sync, and SVM will not realize it.
How do I go back to mirrored again at the next boot?Detach the side you're not booted from. Redo the metaroot and come up on the (now one-way) mirror. Once booted from the mirror, reattach the other side.
My best guess goes something like this -
Loop for each mounted slice - Use metadetach to remove the one not mounted. Use metaattach to add it back. Use metasync to confirm the mirror synced up again.You'll want to detach before using the mirror again, but you can't attach until you stop using the raw slice. So you can't just detach/attach in one step. You'll need to reboot between them.
Once that loop has completed assume that any MBR stuff is broken. A bit like I've done with "mkboot" on SPARC but following the steps in the doc. Look at menu.lst, fdisk, installgrub, metaroot, have with and without mirror copies of /etc/vfstab and /etc/system ready just in case, reboot.
Not sure why any MBR stuff would have been affected unless you did so explicitly.
Basically all of the steps from the doc only instead of using metainit use metadetach, metaattach, metasync.
Does this make sense? It parallels stuff I've done on SPARC but I have a lot more experience on SPARC than on X86.Should be the same on both. If you're adding a new disk, you need to make sure boot support is added. But in this case I doubt any of the boot support was damaged (depending on the details of what led up to your changes).
Darren

IPhone 4s hang up after updating to ios 6.does not turn off screen goes to zoom.revert to normal after reset.occuring everyday when in locked mode.

hi kindly help out what can be problem. mostly at same time in evening it happens

To disable Zoom double-tap the screen with three fingers.
Go to Settings > General > Accessibility > Zoom and turn this OFF.

After I set a repeating alarm clock to off, it goes back to on after a few seconds.

Similar Messages

Maybe you are looking for