After I started using Airport Express, my HP LaserJet 5000 won't print. I get the message "Network host '192.168.0.4' is busy." How do I fix this?

After I started using Airport Express, I get the message " host '192.168.0.4' is busy" andmy HP [ethernet] printer no longer works.

OK, I found this thread which answered my question.
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

Similar Messages

When using iMessage on my iPad it sometimes won't let me send a iMessage unless there is a photo attached to it, how do I fix this?

When using iMessage on my iPad it sometimes won't let me send a iMessage unless there is a photo attached to it, how do I fix this?

Check Settings>Messages>Show Subject Field and make sure it's set to "Off".

I forwarded a message using my iPhone 5. Now, every time I send a new message (through Send A Message in the Contacts section), that forwarded message automatically appears in the message box (as if it were a template). How do I fix this?

If I send a message directly through Messages, that forwarded message does not appear in the message box.
But I would like to not have that message as the template for my texts.
How do I take this "template" out?
Thank youu!

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

After I close Firefox, if I try to re-open weithin about 1/2 hour, I get a message " Firefox is still running but not responding". How do I fix this?

The question is all there is!!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

After years of no problems I can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable. What are themes? How do I install them?

After years of no problems I sddenly can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable. What are themes? How do I install them? Why has this problem suddenly arisen?

Re-installing does not affect your Library in any way. You don't delete it, only the app.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
Regards
TD

After downloading the new Os X Yosemite my computer has been lagging, how can I fix this?

After downloading the new OS X Yosemite my computer has been lagging, how can I fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I use Final Cut Pro X to make YouTube videos. The sound is great when I watch the videos on certain computers, but muffled on others. How do I fix this?

I use Final Cut Pro X to make YouTube videos. The sound is great when I watch the videos on certain computers, but muffled on others. How do I fix this?

You don't. You can't control how other computers or browsers play back the footage. The best you can do is export a master file that plays great on your computer. What youTube does with it, or how other computers play it back is out of your hands.
Just like me with broadcast TV shows. I deliver the most pristine version I can to the network. But then they convert it to a digital file that they then beam out to cable and satellite providers, who then compress it again to play on their systems. And then it arrives at grandma's house and plays on her TV. I have no control how my grandma receives the signal, nor how her TV is set up. Unless I am nice and tweak things when I go visit. But I can't do this at every house that might want to watch my show.

I just started getting the error message below - when I drag a file to TRASH, I get the message "Finder wants to make changes. Type in your password to allow this. Why ? and how to to stop this request ?

I just started getting the error message below, when I drag a file to TRASH, I get the message "Finder wants to make changes. Type in your password to allow this." Why ? and how to to stop this request ?

There should be nothing native to the OS X which would ask for a password
or other information on a restart, unless accompanied by the traditional login
box with your user name.
There are adware or marginal products that could be called malware (bad)
that would impose their presence and some items that could have been
downloaded by accident or through some corrupted free software site; of
those some could ask for and gain permission to go through your Mac
and maybe even run in the background to do other nefarious misdeeds.
You could see if startup in SafeBoot allows you access past that the Completer.
Since I don't have a pile of helpful article links on how to resolve various issues
I'd be looking them up one way or another.
There are some helpful items in the site http://thesafemac.com - see Tech Guides
listed (adware, malware, & performance) plus a link to the adwaremedic page.
Also, Apple support has a helpful page on how to remove adware and other bits:
•Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
Hopefully this helps somewhat.
Good luck & happy computing!

I have just created an apple ID to use face time, however when I try to log in I get the message 'email already verified' and can't move on.

I have just created an apple id to use face time. However whenI try to log in I get the message 'email already verified' and then can't move on.
Can anyone help please.

You must create the account using an Apple device, a Mac (Lion or greater) or an IOS device (IOS5 or greater). Having done that you will be able to sign in from your Windows machine.
FYI, iCal is an application that can display calendars from iCloud (and others) it is not a calendar itself, merely a calendar client. In Windows Outlook is the calendar client.

I am thing of using Final Cut Pro but when I try and download I get the message "Your computer's video card does not meet the minimum system requirements." Can I do anything about this?

I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.

Geoff2T wrote:
I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
It is just as the message says. Your video card is not compatible.
You can add a compatible graphics card and use FCP X with your mac. I can't suggest which one, but maybe other people on this forum can guide.
And you may also get good suggestions in the Mac Pro forum.

I go to start the "Apple Mobile Device" and it says the side-by-side configuration is incorrect. (Error 14001) How do I fix this?

I go to start the "Apple Mobile Device" and it says the side-by-side configuration is incorrect. (Error 14001) How do I fix this?

Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
(95675)

When I click on "Sign in to Sync" the page "about:accounts" shows error "The URL is not valid and cannot be loaded." How do I fix this so I can use Sync?

When I click on the three-bar icon (top right) and then on "Sign in to Sync" a new tab opens attempting to load "about:accounts" . . . the page that loads is an error . . . "Problem loading page" shows up on the tab and the page displays:
The address isn't valid
The URL is not valid and cannot be loaded.
Web addresses are usually written like http://www.example.com/
Make sure that you're using forward slashes (i.e. /).
Try again
I am running Firefox 30.0 on a Dell XPS-18 and Windows 8.0.
I cannot access "about:accounts" at all. How do I fix this?

The about:accounts page is a valid page in the current Firefox release.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

TS1398 iPad won't recognize wifi password after 7.0.2 update. (The password is correct, but iPad says it's incorrect) How do I fix this?

My iPad won't recognize my wifi password after 7.0.2 update. The password IS correct, but I continue to get the message that the password is incorrect. Any ideas how to fix this?

I have the same problem too on my iPad 3. One thing that sometimes works is if you go to the App Store and put your password in there after a few tries it may work.

I deleted the font section but everything in Photoshop CS5 works. How can I fixed this because I use fonts all the time? I don't want to purchase another one since this cost me $699:(

I purchased PhotoshopCS5 Sept 2010 and still use the same MAC. I invertly deleted the font section but everything else works. How can I fixed this because I use fonts all the time? I don't want to purchase another one since this cost me $699:(

Which version of mac os x are you using?
Could you clarify what you mean by "I invertly deleted the font section"

Everytime I try to use iTunes on my iPhone 5 I'm getting the message too many HTTP redirects!! I have tried everything to stop this as I can't use iTunes on my phone HELP!!!!!

Everytime I try using iTunes on my iPhone 5 I keep getting the message appear Too many HTTP redirects HELP !!!!!

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
Have you tried ALL the recommended troubleshooting steps yet?

After I started using Airport Express, my HP LaserJet 5000 won't print. I get the message "Network host '192.168.0.4' is busy." How do I fix this?

Similar Messages

Maybe you are looking for