After I tried up date my new ipod touch 8G, appeared an error 1602 and now my ipod not work
I wait for someone help me
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694
Similar Messages
-
tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off
Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
is there something else I can do to get Pandora to play again?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?
Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694 -
Oil got into my ipod and now it will not work at all is it worth fixing or should i just replace it with a new one ?
Replace it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distressIf she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up. -
prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
How do I reinstall an older version of the software on my IPod touch? Installed the latest update and now it no longer works in my car.
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback. -
Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions
What happens when you try to restore? Error message?
-
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. Why is it off of the app store now and how do I get my money back?
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
i updated my ipad 3 to latest version of system upgrade and now it is not working. All black screen with Itunes logo. I tried restarting
Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard. -
After I turned the "find my iphone" app on to locate my daughters ipod from my iphone, it erased everything on her ipod. Now it is not working right. How can I fix this?
Welcome to the Apple Community.
Restore it from a back up. -
Help with ipod classic 80gb 2nd new ipod not working
I need some help with my ipod, this is the second ipod I have had in the same number of weeks the first one worked fine for about 8 days and then when syncing one night it froze and then would not disconnect, I searched the support section and worked how to reset the ipod which | did many times, in the end I restored the ipod to the factory settings and synced again the end result of this was that the ipod would not turn on despite everything that I tried. The apple log would appear and the ipod would then try desperatley to switch itself on with the apple logo appearing and disappering all the time. Apple have replaced the ipod and I have fully charged the new ipod synced it this evening all was ok, the ipod synced and then told me to disconnect and the same thing is happening again I have tried to reset multiple times and all that happens now is the apple logo appears and disappers it will not switch on or off, itunes keeps telling me that it cannot recognise the ipod at this time and the safely remove section on my task bar on my computer is telling me that the ipod has malfunctioned. can anyone help? am I doing something wrong someone suggested that I should have downloaded itunes once I had my ipod and not before, I have about 20GB of music in itunes and I was not aware that you needed to use or own an ipod to use this music storage system
HELP
Thanks in anticipationwell it looks like you might have a tech issue here; try to return the ipod and choose a different store and buy one ... also try to uninstall itunes totally, back up your songs on a CD or DVD, and then re-install a fresh new copy of itunes ... this might work ... good luck!
-
my photo stream does not work at all. I've tried making a new album, but that does not work. So I've tried using an already existing album and deleting the pictures there. I decided to only upload 1 photo from my old phone (iPhone 4s iOS 7.1.1) to see if it'll show up on my new device (iPhone 5 iOS 8.1.1) it doesnt even show up in my new phone (iPhone 6 iOS 8.1.2) this picture is what shows up on both my iPhone 6 and 5 but on the 4s there is a picture that I "uploaded" and a second one that came out of nowhere. I do not know what to do because in the past this has worked out for me and it shows up on all three devices
You can't restore to a backup that was taken on a device which has a higher version of iOS than on your iPad, you will have to update your iPad to 8.1.3 to be able to restore to it
You should be able to update your iPad via Settings > General > Software Update
Maybe you are looking for
-
Can we use an "if then else" statemtent in a query such that it executes particular query depending on the condition specified on a UDF? That is, if condition = true, then execute query1 else if condition = false then execute query2. How do we write
-
Move photos in photostream to new phone
There are 800 photos in my old iphone 5 photostream. How to move them to my new IPhone 5s?
-
My messages usage says I have 2.9GB of (saved) Messages. Thing is I have not 1 saved message, I delete them all. How can I clear this usage?
-
I've got a site that uses a lot of server-side includes, because the client has a lot of redundant info all over the place. When I edit these includes in Dreamweaver, the best way to handle it is to use my stylesheets at Design-Time (a feature I just
-
HT1296 How do I load my old macbook data onto my new macbook using an external hard drive backup?
I have a new macbook pro that I bought and started to use. I then went back to using my old macbook because I couldn't learn some of the new keystrokes and software and it was slowing my ability to get work done. i am now ready to use my new comput