After I updated software lost Arabic Language

I bought a Nokia 6300 from Dubai and the orignal language was Arabic , then I made software update ( updated to 550) but after that I found the languages are only (English, French and Portgees)
in order to get the Arabic back I have tried to restore it to the orignal factory setting but without any success.

Your phone was originally manufactured for a region where French and Portugese is spoken (English is always on every device).
Then someone imported it to an Arabic speaking country and illegally updated the firmware.
When you used NSU, the upgrade used the information on the phone (product code) to install the latest version of the original firmware.
You can ask if a Nokia repair center in an Arabic speaking country can help you.
Or you can return the device to the seller and ask for a device that was originally also intended for an Arabic speaking country (or you can buy a new one from a reseller that sells legally imported devices).

Similar Messages

  • I lost arabic language in my nokia 6085

    i updated my phone nokia 6085 and i lost arabic language
    please help me to restore arabic language or any one who have this phone may give me the product code for arabic

    At the top of this message board, plain for all to see, there's a topic entitled "Language changed or missing after software update". You might want to read it.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Lost Arabic language

    I installed software update for Nokia 6131 with Firmware 6.10 and I lost arabic language and now I can't write arabic message please I want help because I do n't know what I can do to solve this problem or this situation please.....

    No, the update will not remove languages, if they were there when the phone was originally manufactured.
    NSU is just delivering the latest version of whatever phone software (firmware), including the languages, the phone had when it was manufactured.
    When you lose a language, then the phone was originally manufactured for a different country/region with different languages, and someone (illegally) imported it and changes the firmware to a different language/region. NSU does not know this was done, and just delivers what the phone originally had, and what Nokia's systems think it still should have.

  • After an update I lost you tube.

    After an update I lost you tube and my data  this also happened to my husband.  Very cross as I had crochet patterns saved

    Sorry, no YouTube in IOS 6.
    You can use the iPhone version of YouTube or Jasmine
    http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
    https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

  • HT204204 my apple ipad wont turn on after i updating software

    sir,my apple ipad (16gb) wont turn on after i updating software correctly.so still this off position and cant any work.please help me

    You took a backup on your computer's iTunes prior to starting the backup, or you have a recent backup ? And you have all of the apps that you had on the iPad in the Apps part of your computer's iTunes library - none of your iTunes downloads are included in a backup (that contains apps settings and contents), the restore will look to pick them up from your iTunes library.
    To restore select the iPad on your computer's iTunes and either do File > Devices > Restore From Backup
    Or on its Summary tab in iTunes click the 'Restore Backup' button

  • HT5007 I made a signature of "APP Revista Carta Capital." After the update I lost my signature. What is the procedure?

    I made a signature of "APP Revista Carta Capital."
    After the update I lost my signature.
    What is the procedure?

    I made a signature of "APP Revista Carta Capital."
    After the update I lost my signature.
    What is the procedure?

  • Update N73 with Arabic Language

    Hi all,
    This is the first time for me on this Nokia discussion board.
    My asking about how to update my phone N73 languages with Arabic language which is not included into the original setting for the phone software, in other words how to add the Arabic language to N73 phone?
    Need a quick reply
    Thanks in advance
    Tamer

    Normally, phones are provided with languages for the country or region where it was intended to be sold, but sometimes the retail trade moves phones about before they are sold to the public, so it is possible that you have a phone that was not intended for an Arabic country.
    A Nokia service point may be able to add the arabic language pack.

  • After ios5 update i lost the change button in my contacts so i cant change phones, email, adresses...

    After i did the iOS 5 update i lost the ΄΄changes΄΄ button in my contacts. So now i cant change anything...phones, email etc.How can i take the button back?

    This is what I fixed to get all my data back - if everything works correctly you shouldn't lose anything... http://discussions.apple.com/thread.jspa?threadID=2478473&tstart=0

  • HT4623 problem after installing update software.

    why when i start to install the update software ver. 7.0.5, at the end on my screen only appears itune icon?

    If you have the iTunes icon and a cable on-screen then that indicates that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808 - you will need to connect the iPad to your computer's iTunes and you should then be able to reset it and restore/resync your content to it

  • I Lost Arabic Language After Updating Software c3-...

    Hi Everyone , Sorry for disturbing' you but I'm really need help ! 
    First, I had a problem with a message that appears when I tries to use camera " File not supported " , so I Setup Ovi Pc suite and Update my Mobile Software which was v4.20 to v7.20 , and it seems to work good , but when I'm trying to write a message in Arabic , There's No Arabic ! And You know I need it cause I'm in Middle East Area , and it's usually used here ! .. Waiting for helping .. 
    Thanks ! 

    It seems that your phone was not intended to be sold in your region.. The retailer added the language afterwards for his own gains... You may contact the retailer again and explain the issue.. and if you are lucky, you may get the language pack added (..may be free of cost.. if you insist..) .. If not then the ONLY solution that remains is to get it installed at Nokia Care.. may be by paying a little fee..
    Be warned that you will be in the same situation again if you go for any firmware update in the future...
    BTW.. there are n no. of threads on similar subject already on this forum. Always SEARCH for your problem first.. before you start a fresh thread...

  • I lost Arabic language from my C7 after updating t...

    I really need solution for this problem!!
    HEEEEEEEELP THERE!!
    Solved!
    Go to Solution.

    If you are referring to the phone's language pack, it is market-dependent and pre-installed on the phone. Phones that supports these language are usually being sold only to countries where the language is mainly spoken.
    tiny_chef

  • Why are my photos lost after i updated software??!?!

    I updated my software after recently importing pictures from my iphone on to the mac.Verified that it was in my picture folder on mac then updated my mac and now the pictures are gone please help!!!

    Did you make a backup before upgrading? If not,
    Data Recovery – Best
    Data Recovery – Disk Drill
    Data Recovery – Data Rescue
    Data Recovery – File Salvage
    Data Recovery – Stellar Phoenix
    Data Recovery - uFlysoft
    Data Recovery - Recovering Deleted Files
    Data Recovery - Recovering Deleted Files (2)

  • What do i do when my ipad 2 turn off after i updated software to ios 7

    does anyone know what to do when your ipad 2 gets frozen on the apple logo after updating the software of ios4 to ios 7?

    If reset doesn't work, force your iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • HT1222 Why, after an update, I lost all my private data?

    Hi,
    I am living in Denmark, and these days I'm in California for work/holidays.
    I stupidly accepted the update proposed by my phones (in the setting menu). There was no warning at all about the fact I will need to conect it to iTune after that, otherwise, I am not that stupid, I would never have do it!
    Now I just cannot use my phone as it need to be reset from iTune (not installed on the computer I have with me)... So:
    1. I probably lost all my pictures since last time I plugged synchronized my phone when I was in Denmark
    2. I cannot get my work and personal emails
    3. iPhone, as its name mentioned it a phone... how do I  phone when my screen shows "connect to iTunes" ???
    4. I will drive a few 100s miles in US... how do I acces my music when my screen shows "conect to iTunes"
    What the #### is that?
    Where is the HQ of Apple? As I'm in CA, maybe I should go there and throw it through one of their windows?
    I bet that there is no way to downgrade my phone as it was before?
    Can somebody call my boss, my parents and my girlfriend that I will give signs of life when I'll be back to Denmark? And ask them not to blame me of fire me?
    Seriously, until now I was really happy about Apple products, despite their restrictions, but this is definitely too much!
    Any recommendations?

    On the screen on the iPhone does it show a usb cable pointing up to the iTunes synbol?. If it does then your iPhone is in recovery mode and needs to be restored through iTunes on a PC/Mac.
    Now in terms of the data you lost, would you know if you backed it up to iTunes/iCloud?. Did you sync data with iCloud at all? e.g. contacts, calendars.

  • HT1338 my macbookpro is getting heated and very slow after i updated Software to Mac os x 10.6.8

    Recently i updated my macbookpro software to mac os x 10.6.8, after update CPU fan is running non stop even when laptop is idle and laptop is getting more heat thn laptop is too slow,videos are playing very slowly.its very weird.
    some one encountered same issue after update???is there a way to revert the software  back to previous version??please help
    my laptop configuration:-
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro7,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP71.0039.B0B
      SMC Version (system):          1.62f7

    Firstly ...
    Before you buy anything, first make sure your Mac is compatible.
    Minimum specs for Snow Leopard.  Mac OS X v10.6 Snow Leopard -   Read the Technical Specifications
    Buying Snow leopard from Apple.        Last I read, you must call them (1-800-MY-APPLE). It is $29 plus tax for family pack and $19 plus tax for a single.  You can also buy through your National Apple help number.
    Once you have it you must update using the ...
    Combo updater for Snow Leopard.      Mac OS X 10.6.8 Update Combo v1.1
    Hope this is what you wanted.

Maybe you are looking for