After I updated the latest iso 6.0.1 my speaker is problem
After I updated the latest iso 6.0.1 my speaker is problem.
Only the upper one and all the rest is working good ( loud speaker and headset).
Just only the one I put on the ear.
Please help !!!!
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Similar Messages
-
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
HT1689 my ipad 2 doesnt work that well. it always hang by it self after i updated the latest ios 7.
my ipad 2 doesnt work that well. it always hang by it self after i updated the latest ios 7.
you should backup and restore via itunes
-
I can't download a driver to allow my computer to recognize my touch. This was the problem after I updated the latest version of Itunes.
See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I have an iPad 1 and after I got the latest update for keynote and Now it crashes every time I try to open it
Do you have iOS 5.1.1 on your original iPad? If not update the iOS.
You might also try quitting the app and then reset the pad.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Still no joy? Delete the Keynote app, reset the iPad and then reinstall Keynote. You will not have to pay for downloading it again. -
after doing all the latest updates to both my iphone 4s and itunes the itunes store app on the iphone just dissapeared. Now i can't purchase any media. How can i get itunes store app back on my iphone?
If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > iTunes being set 'off' ?
-
After I installed the latest update, MSVCR80 was not installed and itunes will not work
After I installed the latest updat to itunes, it did not install properly. I received the following messages:
Service "Apple Mobile Devise (Apple Mobile Devise) failed to start. verify that you have sufficent privileges to start system services Abort, Retry, Ignore
Itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 126)
When I click on the itunes icon, I get the following message:
The computer can not start because MSVCR80.dll is missing from your compyter. Try reinstalling the program to fix this problem.I've revised my advice slightly...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall go to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above then search the computer for copies of the file QTMovieWin.dll - you should only have one copy in the relevant folder for your system.
C:\Program Files\Common Files\Apple\Apple Application Support (32-bit Windows)
C:\Program Files (x86)\Common Files\Apple\Apple Application Support (62-bit Windows)
Delete any others and not only should this fix the problem, but prevent it from recuring on subsequent updates.
tt2 -
After update the latest photoshop cc 2014,contact sheet font can't set what point size I want
After update the latest photoshop cc 2014,contact sheet font can't set what point size I want.
Yes I do,but I don't understand that :
Wed Oct 22 2014 16:55:21 GMT+0800 -
CSXBridge.runFromBridge()
Wed Oct 22 2014 16:55:21 GMT+0800 - Sending to PS: [
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-1_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-2_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-3_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-4_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-5_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-6_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-7_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-8_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-9_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-10_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-11_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-12_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-13_CC.tif,
/My_Job/LP_10-14/Michael%20Sloyer/Sloyer%2020x30-14_CC.tif] -
After update the latest iOS 4 my ipad screen sometimes continues moving
Why after update the latest iOS 4.3, my ipad screen sometimes continues moving and hard to chose or touch the keyboard or icon?
I have the exact same issue. The screen moves up and down just a little so the bars in the top left hand corner are almost hidden. And pressing icons does not work at times. Pressing buttons inside open apps does not work at times or takes forever to execute the command. Also, some apps freeze or open and then suddenly close. I updated all my apps to determine if the cause was an app that is not compatible with the new operating system. This did not work. Is there a way to update again? Could the problem be that the update was corrupted in some way? Any suggestions would be appreciated. It did not happen with my iPhone when I installed the update.
-
Creative cloud disappear after 15 secondcan't update the latest version
When I start my computer Creative cloud disappear after 15 second i can't update the latest version. when I try more time ICON disappear from the Top right corner. I try to uninstall the apps it is not working. please help.
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!
Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot. After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.
-
After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Music player problem after updating the latest ver...
After updating the latest version for my phone, everything seems perfect. But today i see there is a serious problem of the music player. I still can play the music but i cannot change to another song or exit the player because whenever i do that, it is frozen (only music player).
Does everyone have the same problem and knows how to make it work smoothly again? Thanks
Message Edited by beingkiller on 17-Jan-2010 04:14 AMHI even my phone has stopped responding. I had a backup file in .nbu format created using the PC suite. I restored the phone using the backup file but it didnot help me. I cannot play even 3 songs consecutively, the player is getting hang and I am forced to restart. Please do not update your firmware. All the problems after I updated my firmware to 40.0.005 version. I am planning to take my phone to nokia care and reset the whole software once again so that it comes with the factory settings.
-
Hello everybody, Im trying to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G. I don’t require a complete reinstall just need to be able to update my itunes.
What I have tried so far is I had my MAC search for update’s and it said that I should update to (ITunes version 10 . 6 . 3 ) So I asked it to do the update but after 2hrs of waiting for it to download/update it then puts up a message saying the following- (In order to continue installation, please close the following application: ITunes).
When I tried to do this another message comes up that says- (The update ITunes can’t be installed. The following install step failed: run preupgrade script for Apple mobile device support. Contact the software manufacturer for assistance.)
I have also tried to run the update while having closed ITunes before I even start the update but the same problem happens after waiting about 2hrs.
Some one that had the same problem said this might be happening in the older operating systems. But that does not make sense because surely Apple want customers who own a MAC and i-phone to still buy from iTunes.
My MAC is about 4-5years old. I have a i-phone.3G,
Can anybody help me please and Thank you?Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.
-
I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden
Maybe you are looking for
-
Can I connect a Thunderbolt Display To the MacPro?
-
Create BI system in NW 2004s Portal system
Hi, We have BI 7.0 and NW 2004s Portal systems in place. We tried to integrate BI system in Portals. I followed the same exact steps provided in help.sap.com. I think they are not clearly mentioned for 2004s version. while we try to create systems, w
-
Canvas problem on a s60 device
Hi i am having a problem displaying a canvas on top of the previous canvas that was displayed. basicly i have tow canvas, one is a full screen canvas and the otehr is simply a rectangle box witha txt inside... on the default colour phone emulator i c
-
EXPORT Problem. when i choose USER mode, it is exporting full database
Dear OTN Members, we have a system ORacle 8i, 8.1.3 database, we created a user with DBA role, when we want to export data for a perticular user, after giving USER MODE Option, it is doing full database export including sys, system etc. what is the r
-
Can I use Smiley Central Ap with Firefox 4? I have Mac OS X 10.6.7
I have a MacBook Pro with Mac OS X 10.6.7. I have downloaded Firefox 4. I tried to download Smiley Central Ap, but was informed it only works with Firefox 3. How can I get Smiley Central to work on my Mac?