After I updated to yosemite my iMovie will not open.  I have found the folders in the applications for both versions 9 and 10 but neither one opens when I double click on the icon.  How do I remedy this?

After I updated to yosemite my iMovie will not open.  I have found the folders in the applications folder for both versions 9 and 10 but neither one opens when I double click on the icon.  How do I remedy this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • After updating to yosemite my mail will not import my mailboxes so it won't open mail at all HELP please

    after updating to yosemite my mail will not import my mailboxes so it won't open mail at all HELP please

    I have the same problem. The mail app doesn't work properly. Either cannot connected to the server or fail to connect. But the network is totally find and work well as i can open website.
    Another problem is sync to the software, like Evernote, nustore,  fail to connect to the server, cannot sync anymore.

  • Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

    Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

    The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.

  • After installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded

    after installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded. How do I fix this problem? Thank You, Mike Chidester

    is it up to date
    Speed Dial :: Add-ons for Firefox
    "Works with:
    Mobile 0.7 - 1.0.*
    SeaMonkey 2.0 - 2.5a1
    Firefox 2.0 - 8.0a1"
    https://addons.mozilla.org/firefox/addon/speed-dial/#detail-relnotes

  • HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running".  Windows 7.

    After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run.  itunes will not now run.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?

    have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?

    Handbrake is not ideal for this.
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

    After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
    Any suggestions as how to fix this?
    I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

    Thunderbird > preferences (I think on a mac) and under attachments set the folder

  • I'm trying to setup my new iphone and the Apple ID it asks for is my friends old Apple ID that she no longer has access to. How can I fix this?

    I'm trying to setup my new iphone and the Apple ID it asks for is my friends old Apple ID that she no longer has access to. How can I fix this so I can use my new phone? The first step asks for my iCloud info but then asks for my friends after I agree to the terms.

    The iPhone is new, has never been used. When asked if I want to set it up as a new phone, restore from an iTunes backup, or my iCloud backup I selected iCloud. It then askes for me to sign in with my Apple ID, I then agree to the terms, then it asks for me to sign into my friends Apple ID. She and I have used each other's computers in the past so I assume this is where her information is coming from. The problem is she no longer had that email or Apple ID and has no way of gaining access to it and therefor I am unable to proceed.
    I suppose my question is, how can I remove her information from mine so I can setup my new phone using iCloud. Also, I have already checked my Apple ID online and nowhere on my account is her information listed.

  • How come when I double click on the Contacts icon, my contacts do NOT open

    When I double click on the Contacts icon, how come the Contacts file does not open?

    THANKS...I did single click & my contacts do not display as they usually do.
    Tried to delete the icon from the dock & opened Applications & moved the Contacts icon to the DOck, but this didn't solve the problem. 

  • I cannot open numbers.  When I double click on the icon it says "Numbers cannot be opened while it is being updated."  The same is happening with other programs.  I recently upgraded to Mavericks

    I cannot open numbers.  When I double click on the icon it says "Numbers cannot be opened while it is being updated."  The same is happening with other programs.  I recently upgraded to Mavericks

    Well, I figured itout.
    Apparently the Numbers (and Pages) app downloads was stopped and \never re\started.. possibly because of something I did, like turn off my machine during them.
    I went to Apple > App Store > Purchases.  I discovered all three iWorks apps were listed but showed "Resume" as the status button at the right.  I clicked on each to get them started again... and they eventually automatically became "Installed".
    They work, now!

  • When I double click on Firefox Icon, it doesn't start

    when I double click on Firefox icon the clock glass appears on my pointer but the Firefox doesn't start. but some days like today it opens and doesn't have any problem.
    I predict that I will have this problem again after I close the Firefox's window.
    The problem started since a few days after updating my Firefox.
    == This happened ==
    Every time Firefox opened
    == afew days after updating my firefox

    One of your add-ons might be the culprit. Try running Firefox in [[Safe Mode]]. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]
    ~~~~~~~~~~~
    If that does not solve the problem, [http://support.mozilla.com/en-US/kb/Managing+profiles#Creating_a_profile create a new profile] Then, Recover your data from the old profile. See http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • Where has my airport utility window gone ? when I double click on the icon all I get is an image of a globe and a base station with no options to make changes in my airport extreme.

    Where has my airport utility window gone? When I double click on the airport utility icon all I get is a picture of a globe and a base station with no further  options available to modify my airport extreme. 

    Sorry, you lost me on that last post.
    Let's start over again.
    Open AirPort Utility on your Mac
    Are you asked for a password at this point?  If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
    You need that password to be able to access the settings for the AirPort router in AirPort Utility.
    If you see a window listing basic information, click Edit in the upper right corner of the window.
    If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
    If you forgot the password, a Soft Reset will allow you to go in and reset the base station password.  Might be a good idea to write down that password.
    If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
    If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button.

  • HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

    Hi everybody,
    I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
    Thanks

    Hello:
    There was an OS X 10.7 update released a month or so ago that fixed this problem.  Run software update.
    Barry

  • HT1222 When i double click, May I know how to remove those use app below? Not like previous version I can clear it to stop those app keep on running

    When i double click, May I know how to remove those use app below? Not like previous version I can clear it to stop those app keep on running

    Swipe up on the thumbnail of the app and it will disappear.

  • How can I play the whole album, when I double click on the album it only plays the first track?

    How can I play all tracks on an album, when I double click on the album it only plays the first track?

    Make sure all the tracks are check-marked.

Maybe you are looking for

  • EHP4 upgrade Error - phase MAIN_SHDINST/RUN_RSVWSCPY were negative

    Hello Currently I am doing EHP4 upgrade on Oracle 10g with Sun Solaris 5.10 , During preprocessing phase ( The EhP Installation program builds the shadow system from the original one.) I am getting following error Checks after phase MAIN_SHDINST/RUN_

  • Eclipse build error for R/3 WSDL file and Portal 6.0.2

    I have had some problems getting a .wsdl from R/3 ABAP to work when using the eclipse plug-ins.  Eclipse will read the .wsdl and create the classes for the service, however, the build will fail and opening the class up you see the methods are all emp

  • Plug in directory

    Hi, I am in the process of configuration, the environment is: SQL 2005, Windows 2003, the installed component is: Weblogic 9.2, EPMA, Essbase, Planning, SmartView. when I configure the web server, I select Apachy, and the next screen ask for the web

  • All my icons are itunes icons after downloading it

    after downloading itunes it turned all my icons into itunes icons and only opens itunes

  • ICloud sign in issues.....

    Hi there friends.. Ok, I think I have set up my iCloud up ok....but... When i log onto icloud.com (using the correct address/apple id)  it signs into an email address that I have deleted ages ago.  I am covering at the bottom of the pic the WRONG ema