After ibernating screen doesnt turn on
Hi there,
My macbook acts strange when waking up after going into ibernation mode.
If i leave it on after a while the screen goes off to save energy(even when connected to the power), the problem is that half of the times if i press the mouse button to awaken it the screnn doesnt turn on...the light under the keyboard lights up, and if i press any buttons i can hear a "bup" noise, like when you press something that you cant do for example, but the screen doesnt turn on and i cant do anything but force the macbook to shut down by pressing the On/Off button.
Any ideas of why this is happening?
Thanks
http://support.apple.com/kb/HT39644
Similar Messages
-
My iphone screen doesnt turn black when im on the phone
my iphone 4 screen doesnt turn black when im on the phone and its not the case and i havent dropped it, is there anything i can do without having to get a new phone. i would get a new phone if i need to but i would like to fix it without having to.
The Ambient Light Sensor may be malfunctioning. Unfortunately there is not much you can do without tampering with the phone internally and voiding the warranty. Your best bet is to bring the phone to a local Apple Store and have them inspect it.
-
I replaced my lcd screen after my ipod doesnt turn on
my Lcd screen was damaged so i replaced it with new lcd screen after that my ipod doesnt turn on?
Send it back to the repairer, most likely the connections are not properly re-install, we cant solve hardware problems here.
-
N8's screen doesnt turn off even after locking!
I dont know if someone has reported it here but will like to report it here.
Sometimes, when i restarts my N8 and lock it, screen doesnt dim or turn off, though screen is locked and there is key symbol on the top. To get rid of this I have to restart phone and how many time, that depends on our luck! This is serious man, I cant keep my screen always on! Expecting quick solution from Nokia. Does anyone here is having same problem? And does anyone has better solution?thanks to G8ZoST :
i've also having the same problem.. but now the problem was clear by G8ZoST idea.. i agree G8ZoST say the correct solution for this problem.. thankz lot -
my iphone 4 screen doesnt work i know phone is one cuz i can hear it when i charge it its the screen that doesnt turn on at all
try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
its happend to me a few time just wondering
Make an appointment at the genius bar of your local Apple Store and have it looked at.
-
During phone calls the screen doent turn off, during phone calls the screen doesn't turn off
The phone screen doesnt turn off when i put it on my ear to make a phonecall
This may very well be an issue with the proximity sensor. Take it to an Apple Store; they'll be able to let you know for sure. But first, to rule out a software issue, try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears.
-
My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody with similar problem....
Hm... Try this----> http://support.apple.com/kb/ht1808 or http://osxdaily.com/2010/12/04/ipad-dfu-mode/
-
my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?
Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414
-
After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Screen doesnt get blacked out when on call after the new update
Since the time i Have updated the firmware screen doesnt gets blacked out, when on call after the new update. Because of this option automatically get selected by getting touched cheecks.
any solution?Please try to update your plugins [http://www.mozilla.org/en-US/plugincheck/] Flash is out of date.
Also the Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
After Update to 10.5.8, stuck on Grey Apple screen with turning gear... and it just stays there...
Apparently I can't safe mode it
Started it in verbose mode and it say disk02 i/o error
Then I restarted it in single user mode, did a sbin/fsck -fy and it says that:
*files have been modified*
*REBOOT NOW*
I reboot and still the same problem.
When I put in the install disk it says *cannot install in this drive* (was thinking about archive and reinstall, but I suppose not ) then when I repair and verify, it says All seems OK
Yikes. Yikes!
Please help.
Message was edited for additional clarity by: BrzrKrkWell, I brought to the Apple Store's genius bar. Can't say enough about the experience... they archived and reinstalled... tried everything else and like sometimes happens, transfer of data can become corrupt in a spot that just makes things go haywire. So the Archive and Reinstall worked like a charm.
Moreover, they replaced my Macbook's top board casing (don't know what else to call it..) (where you rest your hands to type) it was cracked and stuff... not under warranty, but they will replace it free due to design ... I am impressed and pleased... *and me? I am a cynical critic* still, they made the experience as painless and certainly pleasant as possible.
For all who are having problems, I urge you to not damage the wall any further with continuous headbanging: make an appointment and definitely visit the Genius Bar. Your head will thank you -
1. product name and number--- hp pavilion dv7-1260us notebook entertainment pc
2.operating system installed--- windows 7 64-bit
3.error message--- when i turn on my laptop it starts beep sound continuously after hp screen and touch pad also not working properly cursor continuously goes down automatically....
4. i jus installed windows updates.....Hiya,
Is the beep sound happen while loading Windows? Is it coming from the speakers?
Have you tried your cursor in the Recovery Manager to see if it's a software issue? When the BIOS HP logo is on the screen press F11 to load recovery manager. If mouse works normally then you have a software issue, if issue still percists it is most likely hardware based.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem. -
Why will my screen not turn back on after powering down iPhone?
When my AT> 64gb iPhone 4s turns off, or dies, for some reason when I try to turn it back on, the phone itself turns on but the screen doesnt. Sometimes the screen will be a bright white, sometimes it will appear as if the LCD is cracked, and sometimes its just straight black. Eventually (like up to 12-15 hours later), I somehow manage to get it turned back on like regular, and it works fine (however occasionally, there is a white circle that surrounds the middle of the screen. Anyone have any clue whats going on with it? I'd just get the LCD replaced, but it only doesn't work when the phone turns off and back on, so i don't know if that would help at all.
So u Have restarted it on the ipod?
and you have turned it off and on?
have you tried on your laptop or mac? -
my ipad mini is keep on crashing. reboot many times. after the apple logo shows up, the screen will turn into black again.
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Can I generate pulse trains on more than one counter output at the same time?
I have a PCI 6601 card with a BNC 2121 to connect the signals to two devices. The card is used as a trigger for both devices and I want to be able to generate pulse trains on two output channels at the same time, with a time delay between the two. Ho
-
Placing a variable value into an XML Object
I am trying to figure out how I would get the value of a variable into an XML Object. I have the variable var dragonName:String = "Samuel"; var listing:XML = new XML(); listing = <thedragon> <dragon>
-
Promlem with loading QT content in Safari into a div via innerHTML
Hello, I have created a website where I'm loading QT content into a div via Javascript by using InnerHTML. I'm generating the Object/embed with javascript. Take a look at the following javascript function: //This function generates object/embed tags
-
How do i save a picture on my,iPad from an email that was sent to me
How do I save a picture on my iPad from an email that was sent to me
-
Protecting my script from spanners ???
Protecting my script from spammers ???? I am a newbie. I am using DW CS5. I have a members register form and a database for the users set up. I use the DW service behavior of “recordset” and “insert record” to add the new users from the form to th