After Imported TermSet, we cannot modify list the area is unavailable.

Hi !
I don't now if my question is really understood...
I try to explain simply.
We need to export TermSet (with lot of terms) from site collection, to import it on another SharePoint farm.
so we found a solution to Export and Import.
But after imported, when we modifiy a list that use theses terms, the area is grayed... and I don't now why. We can't to modify theses area and it's a problem.
Why ?!
I specify that in the original SharePoint site the list is can be modified for theses area.
screenshot to see : (area FAQ Tab and FAQ Group)
https://imageshack.com/i/paErfppbj
thanks you very much !
Julien.

Hi Julien,
Could you provide detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Also please try to use the SharePoint 2010 CSV Bulk Taxonomy TermSet Importer/Exporter tool to export and import your term set, and see fi your issue persists.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Similar Messages

I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event and the number of pictures.

Hello,
I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event with the event title, the number of pictures and the pictures itselve as small thumbnails. BUt ounce I want to open the event to see the pictures in full screen the event title annouces 0 pictures and no pictures are visble anymore to mee. I have checked if the pictures are marked as hidden and this is not the case. What's going wrong. All the other events are visible in a normal way.
The albums with the same pictures into them are visible.
Thanks for your help,
Raf

Make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #1, #2 and #6.
Click to view image full size
OT

After Execute Query I cannot modify fields values.

I enter in "enter-query", put some values and I enter in "execute-query", my forms return filled with database values, but I cannot modify the fields and update records, when I try to modify, exception raises: FRM-40200.
What Can I do to solve this?
Thanks for patience.

Check in your form if the property is changed at runtime.
Check for set_item_property(<item_name>,INSERT_ALLOWED,property_false);
Check for set_item_property(<item_name>,UPDATE_ALLOWED,property_false);
or
Check for set_block_property(<block_name>,INSERT_ALLOWED,property_false);
Check for set_block_property<block_name>,UPDATE_ALLOWED,property_false);
Cheers
AT

Characters appearing after Import when no character is listed on the Original Document

Good Afternoon ~
I'm hoping someone can assist with my issue. In the context
of the document there is a (c1) appearing after a sentence even
though there is no characters or anything on the original document.
HELP

Sorry but you are still not providing a clear picture.
After what file has been imported into what? Importing is
something the author does but you are are talking about an end user
and how would they know what was in the original file?
Please try again.

Having issues with importing a FLV from Adobe Connect. Either the file is too large to import, the file corrupt or the sound will not play. In the Flash Pro 5.5 version it can only be viewed with sound but will not import so it cannot be converted, the ne

Anyone have a clue how I can open or convert the Adobe Connect FLV file?

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

After importing photos from a digital camera the thumbnails are blank.

I purchased a new iMac a few months ago and had no problem with transferring (and viewing) my iPhoto library onto the new computer. However, now when I import photos from my iPhone or camera, the thumbnails are blanks (with little dotted lines around them). In order to view the picture I must double-click on the image. This makes it a difficult to locate photos! Help me please.

I just got the iPod Classic and I don't see anywhere in the manual that I can still do this. Is it still possible to import my photos from the camera to the iPod?
No, the new iPods do not have a camera adaptor able to do this. Why Apple have decided not to make a suitable adaptor available (the old one won't work with the Classic), I have no idea.

The import com.crystaldecisions cannot be resolved

Hi,
I installed Eclipse Java EE IDE for Web Developers (Version: Helios Service Release 1) and the Crystal Reports SDK via Eclipse "Install New Software" feature described at http://www.sdn.sap.com/irj/sdn/crystalreports-java
I have a sample code now and get in one of the JSP-files in Eclipse the error message:
Multiple annotations found at this line:
     - The import com.crystaldecisions cannot be
      resolved
     - The import com.crystaldecisions cannot be
      resolved
I got the Crystal Reports for Eclipse Developer Guide and configured my project in Eclipse: menu Project -> Properties and added the CR library to the Java Build Path and activated CR at "Project Facets". I still get the error message... what's missing?
Thanks!

Hi Stefan,
Instead of adding the "Add external class folder" try out to add to your Java Build Libraries "Add External JARs"
When you click on this button you can select the path of all the jar files from your Business Objects installation directory.
E.g. C:\Program Files\Business Objects\common\4.0\java\lib"
and "C:\Program Files\Business Objects\common\4.0\java\lib\external"
Regards,
Anu

Duplicates after import

Hi,
New to iphoto. I did an import from cd of my images, and they all showed up in last import. I created a new folder called flowers, and copied about 500 pics from the 'last import' into my flowers folder.
Now I did a spotlight search to see where the images were stored.
Surprisingly I saw:
/users/Craig/Pictures/iPhoto Library/Originals/2008/Feb 16,2008/*.jpg
/users/Craig/Pictures/iPhoto Library/Data/2008/Feb 16,2008/*.jpg
It appears (doesn't seem to be symbolic links) that the images are duplicated, no editing done after import on these pics. In the Data directory , all pictures have rw-r--r--@ (note the @ sign afterwards), while in the Originals , some of the images have the @ sign but most of them don't.
I'm unclear why this is happening , what the @ sign means. I know not to modify the iPhoto database, but I certainly don't want duplicates of every photo I put in.
Appreciate any feedback and comments on this.
Thank you.
Craig

Craig:
I use PhotoPresenter for some of my slideshows. It has over 20 animated themes that you can use. Here are just two: Apple TV Intro - Reflection. It integrates with iPhoto so you can make slideshows of albums or events. You can run it in demo mode to see if it fits your needs.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

PHP login - Warning: Cannot modify header information

I don't know much about PHP so if this is a FAQ / basic
problem then sorry
... but I get this warning message on a page after logging in
Warning: Cannot modify header information - headers already
sent by (output
started at /home/.sites/78/site58/web/elite/index.php:2) in
/home/.sites/78/site58/web/elite/index.php on line 40
Any help appreciated!
Gerry

Ah - I get it, a space before the code.
G
"G" <[email protected]> wrote in message
news:e34m08$3kv$[email protected]..
>I don't know much about PHP so if this is a FAQ / basic
problem then sorry
>... but I get this warning message on a page after
logging in ...
>
>
> Warning: Cannot modify header information - headers
already sent by
> (output started at
/home/.sites/78/site58/web/elite/index.php:2) in
> /home/.sites/78/site58/web/elite/index.php on line 40
>
> Any help appreciated!
>
> Gerry
>

Ejecting card after importing photos

I am using LR 2.3 on a Macbook Pro running OSX 10.5.6 and have noted that since switching from the Nikon D200 to D700, when I import there is no check box for ejecting the card after import. When I used the D200, this was present. So, after importing, I now cannot find a way to eject the card and just turn off the camera power. Any ideas on how to retrieve the option of ejecting the card? Thanks.

Lots of griping on the internet about this BTW. See here for example. Or here. It shouldn't influence your connection to Lightroom though.

Vld-1134 on pluggable mapping after importing MDL

After importing an MDL file and setting the oracle modules to the correct locations, I can deploy just anything in my target module, except mappings that include a pluggable mapping that references a view, which is correctly deployed on the target module ( validation raises vld-1134). Referencing that view directly from any mapping doesn't raise any problem.
Are there aditional configuration steps required to succesfully validate thoose mappings ?
Thanks in advance,
Pedro Almeida

Can you try synchronizing (inbound) the view to the pluggable mapping? Then try validating.
Cheers
David

Picture Files staying in iPhone after import to Photos for Mac

After I connect my iPhone to my Mac, Photos asks to import. So I imported the photos. If I didn't ask to erase, Photos continues asking you to import the same pictures. In iPhoto I didn't have this issue. Any comments or suggestions? I am duplicating files unnecessarily.

I don't see an easy way to delete previously imported items, but these step worked for me. Be careful to make sure you do have copies of all these photos before you decide to delete them again!
1. Check the 'Delete items after import'.
2. REIMPORT all the 'Already imported' items.
3. Open the 'Last Import' album, and delete all those photos.
For your Secondary question, when the "Open Photos for this device" box is checked, that means when you plug in that iPhone, the Photos app will open up automatically.

Delete from memory card after import

Hi,
I'm a fresh Lightroom newbie, and I am missing how to delete pictures from a memory card as I am importing them into Lightroom. This seems a glaringly obvious feature, so it must be hiding somewhere.
The only options I can see in the "Import Photos" dialog are
- Copy photos to a new location and import
- Copy photos as Digital Negative (DNG) and import
There doesn't seem to be an option to delete files after import, just various ways to eject the card.
I've found one way if I choose "Import Photos from Disk" while in Lightroom, there I have a Move option, but why not from device? Every other photo importer has this.
Thanks,
Zak

Thanks for your responses. I'll go ahead and use "Import photos from disk" and change to my card reader. I personally had no problems in my years reading & immediately deleting files from memory cards. I had a few instances where I inadvertently deleted a fresh imported picture on the computer, I used undelete utilities on the card in these cases.
That said, I still think it would be a good feature. If the users want to do it (2 years of questions), just let them.

Aperture 3.3.2 Not Ejecting Card After Import?

Has anyone else noticed that Aperture is not automaically ejecting the SD card after an Import even thogh that option is checked on the Import window? I've loaded two cards since the upgrade and so far neither time has it ejected the card as expected.

Jim,
Glad you're happy it no longer ejects the card after import. However, that's not the way it's supposed to work if you have the eject card option checked.
thank you, I think
The way it is supposed to work is not described in the manual, for it is depending on the make of your camera. The manual only states:
Note: The options offered in this dialog depend on the way your camera is made available when it is connected. Some cameras connect as mass storage devices. When you import from these cameras, the Erase and Eject options appear. Other cameras simply connect as cameras, and you will not see either Erase or Eject after the import is completed. In that case, you can erase the images directly in the camera.
I see for all cameras different controls. For my Lumix camera I see the "Eject" button, but no option to choose, if I want automatic eject. The Canon camera does not show any options at all. The automatic "Eject" option I have never seen for any camera I had - only an automatic "Erase", that I never used, for it is dangerous. So up to now I had to live with auto eject, because there never has been an option to select differently.
Apple certainly could improve the documentation of this feature in the otherwise very good manual.
Regards
Léonie

User cannot modify business rule

hello everybody,
our user has to launch (and modify) a business rule. he is able to modify them and to go to calculation manager. Unfortunately, when he tries to open the rule he gets this message:
"rule opened in read-only mode. it is under modification by admin".
I've modified the rule three days ago with the admin user, and i've tried to access it with his user id, but i don't get the same message.
can you kindly suggest any solution?
thank you very much,
M.
Edited by: user648334 on Oct 1, 2012 6:10 AM

i've understood the problem: if an user let opened calculation manager and then another one tries to modify it: one get the error 'cannot modify it'.
the solution is to close calculation manager, so that another connected user can modify the business rule.
thanks for the attention.
Edited by: user648334 on Oct 1, 2012 7:00 AM

After Imported TermSet, we cannot modify list the area is unavailable.

Similar Messages

Maybe you are looking for