After importing received and set messages from Opera Mail, Thunderbird works fine but does not save sent messages to Sent folder, even though messages are sent

I successfully imported messages from Opera Mail. Initially the Sent mailbox was not showing in Thunderbird. A quick removal and fresh installation solved that, but Thunderbird does not save the sent messages to the Sent box, where the imported Opera Mail messages are stored. Even though messages are not saved, they are sent correctly. The image attached shows the error message.

Probably a name-confuse If you store sent on mailserver it has to have the right name. (subscribe)
You could set up under Account settings / copies and folders (maps) Sent pointing to the right local folder.

Similar Messages

  • My iphone 5 fell and got wet. it works fine but does not charge right. What do I do?

    help me please i dont know how to fix it.
    my lock button is broken so i can't shut it off or restart it.

    Odds are pretty good you have hardware damage. You need to locate an authorized Service Cneter, but more than likely you are in need of a new phone.

  • Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]-

    Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]…

    Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]…

  • Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

    Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
    My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
    Only the option "connect to wlan" is succesful.
    With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
    With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
    My notebook is a MacBook pro.
    Any idea????
    Thank a lot in advance!
    Kind regards
    Ingo

    Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
    That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
    Apple - AirPort Extreme - Feedback
    If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
    The "catch" here is that you must have an Apple router providing the network to be extended.

  • TS1559 I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem

    I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?

    I have the same problem.  After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work.  I took the phone to Verizon, but they said they can't fix it, go to Apple
    I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now.  I'm also not going to buy any more Apple products.  Their upgrade caused this problem, and they are not standing behind their producet.

  • Setting up HP LaserJet Pro P1102w for wireless but can not save wireless settings

    This printer worked fine on wireless with my last TWC modem/router, but I have tried for hours to set it up with a new one and it simply will not let me. USB works fine, but when I follow the instructions found here: OS X Yosemite Wireless. I choose Method three at this link: Method three: Wireless setup using a USB connection. Here is what happens after this:
    1. I downloaded the latest Apple HP drivers on my iMac (HPPrinterDrivers3.0.dmg). 
    2. Clicked Apple Software Updates to ensure I had the latest.
    3. Turned on the printer
    4. Has paper and is in ready mode with no flashing lights
    5. Plugged USB from printer into iMac
    6. Followed HP instructions: Systems Preferences > Printers & Scanners > Clicked on the P1102w printer which was already on the list > Open Print Queue > Open Printer Utility > HTML Config... > Network Tab > Wireless (confirmed it was enabled, I refreshed the network names and added my wireless network, added my wireless network password) > Apply.
    This is where everything crashes. After clicking Apply, the page will show up blank, the HTML will be messed up, or I will receive a message that says: 
    Safari can’t open the page “http://;ocalhost:5050/cgi-bin/ip_wireless_result.htm”. The error is: “cannot parse response” (NSURLErrorDomain:-1017)
    I have tried other Chrome and Firefox and got similar results. At this point, I am out of options based on the HP support sites that I have found. One HP site said to uninstall the HP software located in Libraries > Printers, so I did this. 
    Any help would be greatly appreciated. Thanks.

    Hi @txrun,
    I see that you are experiencing issues setting up the printer on the new router. I will certainly do my best to help you.
    Make sure Safari is set as the default browser. Sometime the Embedded Web Server won't open or will error out, if it isn't. Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    Restore printer defaults first and then run the HTML again. You may need to delete and add the printer again into the Printers and Scanners to be able to open the HTML again.
    Restore defaults: Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print a configuration page to make sure the old network settings are cleared. Printing a Configuration Page.
    If you are still having issues, please check these settings on the router.
    The printer is only capable of sending/receiving in the 2.4Ghz band.
    If it is set to 5 GHZ network you may need to change to 2.4 GHZ. (rename the 5ghz or shut it off)
    The WPA key setting needs to be on AES to work correctly not TKIP.
    Multi casting needs to be turned on.
    Firewall on router has to have open ports for printer.
    If you have Mac Filtering you need to give printer hardware address from configuration page.
    You might need to contact your router company for further assistance to check those settings.
    If there is anything else I can help you with, just let me know.
    Have a nice weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Suddenly, I am unable to add photos to my project in Imovie 11. I have an IMac Snow Leopard 10.6.8 and have made several movies where this worked fine but for some reason, it has quit. Everything seems to be working fine except that?

    I'm an oldtimer and have had this Mac for less than 2 yrs and have LOTS to learn - but I've climbed the curve a little.  !'ve made several movies and published to YouTube and burned to disc using IDVD with reasonably good results. Each time I have added stills to my movies it has worked fine - but tonight, I'm suddenly unable to add them. I click "Photos" -     select my photo - left click the photo and drag into the project while holding the click. Have the green "+" and the green highlight and even get the green vertical bar in the project but when I release the click, the photo simply disappears!  One "clue" here may be this:  I was able to add one still to this project and the only diff between it and the other still thumbnails now is that there is a "green check mark" on the thumbnail of the one successfully added.  Any suggestions?  (I do have the "advanced tools" option selected in IMovie Preferences.)
    Thank you so much for any help at all.
    Sam

    Hi
    My first thoughts are
    • iMovie ill behaving - Trash the iMovie pref file - use to set things right
    • in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
    Yours Bengt W

  • How come my external hard drive is no longer visible in finder even after ticking it in preferences? it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help.

    it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?

    Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
    My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything.   It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
    Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one.

  • HT4175 after i updated my iphone 4 from ios7 to ios7.1, my phone does not appear any notification whenever i received a message even though notification is turned on.

    after i updated my iphone 4 from ios7.1 to ios7.1.1, i found out that my phone does not notify me whenever i received messages though my notification on messages are turned on..

    One thing to try that has worked for me and that may help is to do a restart. http://support.apple.com/kb/HT1430

  • I have an ipod thats from the 3rd or 4th generation, but does not have a camera and any apps I try to download it says the software is not up to date, but I checked.  How do I fix this and get the next update? My itouch is stuck with version 4.2.1.

    Please help me figure out how to get my 3rd generation ipod to have the newest software in order to download apps.  It will not let me.

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • When using Time Machine in Mac Mail, everything works fine but restored files do not appear in MM - On My Mac, and I cannot find them anywhere.  Thanks

    Time Machine Problem: Mac Mail.  Cannot Find Restored Files in Mac Sidebar where they are supposed to go.
    I am using Mountain Lion on my MacBook.  I have successfully used Time Machine in the past, but I have incurred the following problem that I am requesting help on.
    I am attempting to recover Sent  and Inbox Mac Mail sent.  I go through all the steps properly and locating what I want to recover, and after hitting Restore everything seems to be working and I get a message "Restoring 207 files".  The guides say that then I am supposed to find the files in Mac Mail sidebar under   ON MY MAC.  But they are not there nor anywhere else I have looked.  In other words, everything appears to be working fine except I cannot find the restored files.
    Thank you for you help.
    Jerry

    Although you can restore messages from a Time Machine snapshot within the Mail application, it generally won't work with messages that were saved by an older version of Mail. In that case, you have to use an alternative method.
    Triple-click the line below to select it:
    ~/Library/Mail/V2
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a folder selected. Inside that folder are subfolders representing your Mail accounts. The names refer to the email addresses you use. Decide which ones you want to restore messages from.
    Enter Time Machine and scroll back to the snapshot you want. Select the account folders you want and then selectRestore ... to... from the action menu (gear icon) in the toolbar of the snapshot window. Restore the folders to the Desktop, not to their original location.
    From the Mail menu bar, select
    File ▹ Import Mailboxes...
    Import from the mailboxes in the folders you restored to the Desktop. The imported messages will appear in a new mailbox. Move the ones you want to keep wherever you like and delete the rest. Then delete the folders on the Desktop.

  • Windows Mail - Thunderbird. Online help does not match program. How to Import?

    I'm attempting to follow the Thunderbird directions (https://support.mozilla.org/en-US/kb/switching-thunderbird#w_switching-from-windows-mail-or-windows-live-mail-to-thunderbird) online for Converting from Windows Mail (Not Live Mail) to Thunderbird. I'm at the Import Step. The instructions say:
    "In Thunderbird, go to Tools | ImportExport | Import all messages from a directory | Also from its subdirectories."
    Under Tools, there is an Import, but no ImportExport. When the Import option is chosen, it does not allow for a directory location, only what to import (Eveything, Mail, Contacts, etc.) When choosing "Import Everything" and pressing "Next" nothing is in the list to import. The "Next" button does nothing and the Cancel Button cancels the entire Import.
    Can someone explain (or point to a current and accurate article on) how to import all mail (with local mailboxes and file structures kept intact).
    Thanks.

    In the first paragraph of the section "Importing Windows Mail Messages", it states you must download and install the ImportExportTools add-on. Once installed, the relevant menu options will appear in TB.
    http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

  • Firefox Android on Nexus 7 (2012) does not clear history/private data on quit even though I have it set to do so.

    I checked for updates for the Android version of Firefox and I have the latest version. I changed the settings to clear privacy data on Quit but it does not work, history still shows when I reopen Firefox. Any suggestions?

    Found the problem. Previous Android version of Firefox did not have a "Quit" option to close the browser. I had an add-on called 'Quit Now" installed. Latest Android version now seems to have its own Quit option which now shows up. I uninstalled the "Quit Now" add-on and when I close Firefox with its Quit button the history is cleared. Others having the same problem should check their add-ons under Tools to see if they have the "Quit Now" add-on. I only caught the solutions after seeing 2 different Quit options.

  • When I run set up... it extracts files somewhere but does not run

    When downloading firefox set up software and runnning it... nothing happens... the files appear to extract, but the set up program does not run

    Have you followed the instructions in [[Installing Firefox on Windows]]
    Are you able to follow the instructions and use an Administrative account, turn off UAC and disable security software ?
    Do you get any error reports ?

  • My iphone4 recently stopped working in my car and no longer asks for audio sources.  It is paired and turns off the radio when a call occurs but does not utilize the speakers or mic in the car.

    My iPhone recently stopped asking for audio source in car and no longer works through the speakers.  It pairs with the vehicles just fine, turns off music, but I must use the actual phone to communicate.  What happened?

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

Maybe you are looking for