After instaling the ios 8.2 my camera and flash light stoped to work. I have a iphone 5c.
iPhone 5c
ios 8.2
camera and flash light stoped to work
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
Similar Messages
-
I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
When i install the new os my fcp,motion and many adobe software not working so please help me out.
when i install the new os my fcp,motion and many adobe software not working so please help me out.
there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
It would also be nice if you could include which model MacBook Air you're using.
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display -
After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.
Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community] -
i have an iphone that i've bought in opportunity.but now after made an udapted,
i can't activat it cause icloud ask me a password.
please help me how can i do.
i don't know the old owner.iphonegaboma wrote:
i don't know the old owner.
Then you have a Serious Problem... as the Apple ID and Password that was Originally used to Activate the iDevice is required with iOS 7.
Removing a device from a previous owner’s accoun -
I moved from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Apple support won't help because it's not their hardware. It's not a playstation controller, it's Spartan brand, and it never connected via bluetooth (it continues to not connect via bluetooth in Mavericks which is fine). I always just plugged it in and it ran because apparently Apple included drivers for it from Snow Leopard onward. However, in Mavericks that's not the case, as when I plug it in nothing picks it up, and when I tried to connect it via bluetooth I would enter the pairing code and then it wouldn't pair. Anyone got any thoughts/ideas?
Thanks for no help. Such a supportive community. I figured it out on my own. I can only connect it via usb cable (which I'm happy with) and in order to do that I had to go through the bluetooth connection steps for some reason. It doesn't show up as paired but I did the steps outlined in this video - http://www.youtube.com/watch?v=Efk77f6d98Y -, plugged the controller in via usb cable and then it worked.
-
My flash no longer works, the flash light does not work it is an iphone 5 about 15 months old
My iphone 5 is a little over a year old, seems like after the update to IO7 the flash quit working as did the flashlight that comes with IO7. i have done the soft start, hard start, Reset and now the complete restore. any ideas?
Thank YouThe iPhone 5 was first made available for sale on 21 September 2012. It is not physically possible for it to be 15 months old.
-
Last night on my phone i insalled the neew software ios6 and this morning when i woke up and it has done was show the silver apple and the loading symbol thing. The loader hasnt moved from its position since its been on. I dont know what to do to get my phone to turn back on and i need it extremely bad. Please help me!
Hello Elliiee,
The steps detailed below can help stabilize your iPhone.
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If the display turns on, go to step 4.
If the display remains black, go to next step.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
Mail used to be shown as a number on the email icon and the same with imessage and so on. These have all stopped working and i have to manually open the client to check if there is email (no, it is not set to manual update but to every 15 minutes). I guess another broken part of the wonderful IOS 8xx
What do you mean, "No it didn't?" I just meant that's how things are working (or not working) on my end. I've done some Googling, and it seems like this is an issue for lots of people, and it's not always consistent either.
-
There is always an error installing the ios, why? I need help, ty
Why is it that there is always an error in installing the ios update 6.0.1. I need help. Ty
What iOS are you currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Has anyone had trouble with dropped calls after downloading the IOS 7
has anyone had trouble with dropped calls after downloading the IOS 7
I downloaded mountain lion and then iPhoto '11 in order to tap into iCloud capabilities with all of my devices. (My Mac was outdated in regards to operating platform to do this). After installing iPhoto 11, I had to repair and rebuild my library of photos. However, after doing this, all of my albums were jumbled and, while I can see the image thumbnail, when I click on the thumbnail, and error that looks like a black triangle and gray exclamation pops up as opposed to the larger hi def image I want to view.
-
Problem : Instance info corrupt in SAPMMC after installing the license
I have successfully installed the NW WAS 2004s preview edition and got the 3 month license key.
However after installing the license, when I went to SAPMMC to re-start the system, the SAP Instace information seems to be messed up.
Before installing the license, MMC was showing the SAP system as [Console Root\SAP Systems\NSP\w72c-7wpdl71 0] and now after the installation it has replaced the 7's in my systems name with #'s, so now it looks like
[Console Root\SAP Systems\NSP\w#2c-#wpdl#1 0].
SAP Management Console is completely unusable because of this. It keeps on giving 'Host not found' errors.
Fortunately, everything else with the system seems to be working fine. At least so far !!
- SLICENSE shows the new license.
- SICK does not report any problems.
So far I am forced to use the command prompt to stop and start the instace and the database. This works fine and I am able to start and stop the system.
Any ideas what could have gone wrong ?
Did it not like the '-' in my system name ?
Anything wrong in windows registery ?
Did I install the license incorrectly ?
And how to fix this ?
Any help will be greatly appriciated.
Devendra
To add more information,
- I did not restart the system, even once, before installing the license.
- After installing the system I just saw SAPMMC and checked all the nodes to see the syslog etc. and they were fine.
- I might have changed some profile parameters after installing the license.
Message was edited by: Devendra ShetyeHi,
It worked for us too. we restarted the SAP servers from the Administrative Tools-> Services panel.
thanks a lot
Padmaja Ragavendra
PS: wanted to give you reward points but it is no tallowing me to
padmaja
Message was edited by: Padmaja Ragavendra -
My front camera and flash wont work
Basically I've tryed everything, I've restored the phone from iTunes and my front camera and flash just won't work, any help?
If you've tried "everything" there is nothing more to try. By "everything" does that include restoring as new? If not, restore it as new.
If the problem still exists, take the device to Apple for evaluation and possible replacement. -
Why has the sound gone all of a sudden after installing the new iOS 5.0.1?
I have had the iPhone 4s since the time it was released in the uk, u had no problems with it, it's network coverage was pretty good, the loudness of the speakers was good ad the battery would last me an entire day, now after installing the new ios 5.0.1, my sous has gone, I can't hear the music playing, I can't here te clicks and the tap sounds when touching the phone, the only time it makes sound is when I make a call and I can put it on loud speaker, other than that there's no sound coming from te loud speaker, oh yeah Siri seems to be working fine. Do aby of you people know what's wrong and if any of you lot are going through the same problem or any other problems since tbe update to ios5.0.1, apple you need to get this sorted as the speaker is important to some of us if not all and it would be great if you could sort this out and any other problems caused by this update and to allow the phone to work and operate the way it should, thanks!
Hi Guys, I FIXED IT!!!!
I have post eariler on this forum and as you know I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back. but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there. all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound. its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits. then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub. This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off. but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right. This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago. I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it. just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers
Maybe you are looking for
-
I got my iPod just a LITTLE wet, and it don't work?
I spilled a whole cup of tea on my purse, and my iPod was in it; the touch screen works, but only a little bit. I can only move the "swipe to unlock" button halfway, and then it stops working. Does anyone know how i can fix this? I'm clueless, and r
-
How to make Firefox notify me every time other software tries to install ff plug-in?
If I'm noy confusing things, there was a feature that informed a user about new plug-ins insltalled by other programs. For example, I install VLC media player. VLC ff plug-in is installed also. What I want is: the next time I launch firefox, a messag
-
My iMac was in sleep mode, I pressed the space bar and the display remined black - no faint images at all. Powered down the computer and still no display. I am new to Macs and have had this used computer for only 3 weeks. What could be wrong?
-
In fs00 control data what is the difference between only balance in local currency & account currency.
-
Why does Safari start at login?
When I restart or login, Safari starts up on its own. What is causing this?