After instaling ver 3.6 I can't load facebook games. And I can't un-install

After installing new ver of firefox 6.1 I think, firefox will not load facebook games. It says that the adobe flash crashed. I looked for an update to no avail. How can I either fix this or revert back to the previous ver?
== URL of affected sites ==
http://www.facebook.com

Hello Alsohim.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Similar Messages

Facebook games and Adobe Help can't "locate" the installed Flashplayer on my computer

FI have a PC with Windows 7 Prof. and I.E 11. browser. My wife can no loger play her games from Facebook because they now require the latetest version of Adobe Flash Player.
I've uninstalled, reinstalled Adobe Flash Player V.14. Check that the Adobe shockwave paler object is" enabled" on the brower's "Mange add-ons"
When I go Adobes Help website, the "Check now" results say that Adobe is not installed or in is not enabled. I've run out of options . What to do? Help!!!!!!!!!!!

Shockwave Player is different from Flash Player; the Flash Player add-on is called 'Shockwave Flash'.

My adobe Flash wont load after installing the upgrade to firefox 6..how can i get it to work?

i play the facebook games and i need to have adobe flash for it to work and when i upgraded the firefox to 6 the adobe doesnt download..i ve tried it many times and it wont download..

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

HT4314 Can't play Facebook games

Can't play Facebook games and won't let me download adobe flash player?

Adobe Flash Player does not exist for mobile devices - that's why you can't download it.
Look in the AppStore for mobile versions of the Facebook games you want to play.

Calendar problem can't open appointment after installing ver 5

After installing ver 5 the calendar opens without the ability to open new appointments .
What can I do?
Adi

somebody?
Help?
adi

Can't use parallels desktop ver.7 after installed OS X Mountain Lion

Dear All
Everyone has solution to fix this issue ? I can't use the parallets desktop ver.7 after installed os x mountain lion.
Please advice.
Thanks & regards

Hi,
Make sure you have the most current build of Parallels 7 - it works well fro me, and the other poster, so unless you have some lind of issue internally, it should work for you.
Try doing a repair permissions from Disk Utility. I needed to do that to get Quicken Essentials to work.
Cheers,
M.

How setup LDAP Sync After Install in OIM 11g ver, 11.1.1.5.0

Hi guys, I'm trying to find how to setup LDAP Sync After Install in OIM 11g (ver, 11.1.1.5)....
I found on Metalink an interesting article "*How to Setup LDAP Sync After Install in OIM 11g [ID 1272682.1]*", but inside there is a Note that says:
Note: This article is applicable to OIM version 11.1.1.3 only. Steps for 11.1.1.5 are not the same, and product manual has documented steps to setup LDAP sync after install.
So, that the steps for 11.1.1.5 are not the same, it's clear.....
and I tried to look for these steps in the manual:
Oracle® Fusion Middleware Quick Installation Guide for Oracle Identity Management
11g Release 1 (11.1.1)
Part Number E10033-06
but I didn't still find nothing for the specific 11.1.1.5.0 version....only for the 11.1.1.3.0 version
Can anyone help me to find where these steps are ? I need this information as soon as possible ti start the development
Thanks in advance for the help
Alex

If you are creating Before and After Create Opeation script, you would be able to access all the variables in the process form. Now obvious question, what are the names of these variables? The answer is: the name of the variable is same as that mentioned in the "decode" column of the provisioning attribute map lookup or in other words, the variable name is same as the AD attribute name. In the example mentioned in the documentation, the variable "%givenName% was used in the script. On the similar lines you can use other variables like "sn", "samAccountName", etc.
Hope the information helps.

Epson 4880 stopped printing after installing ver. 9.17

Epson 4880 stopped working after installing ver. 9.17 driver.

I can't help thinking you may need to reinstall Mavericks. Most people (>99%) aren't having these issues! If you count the number of problem posts, then divide by millions, you'll see what I mean.
I'm fairly certain the Gutenprint drivers support your 560 (can't know for sure because you didn't give the whole model name).
http://gimp-print.sourceforge.net/MacOSX.php
(feature support in Gutenprint drivers is "different." Some people really like it - others not so much)
For the Epson, (which I have 3 of) it is not possible to pinpoint what the issue is (printer or Mac), until you get it printing.
Part of what Resetting the Printing System does is restart the CUPS daemon, which re-creates the index of where to find each driver. So try Resetting the Printing System:
OS X Mavericks: Reset the printing system

Lost desktop info after installing Ver 6.2, sych would not update PC

The Win7 64 drivers are a good thing, syncs fine! THX!
After installing Desktop 6.2 all my desktop data gets gone except the media files. I had no way of importing backup files so I had to revert back to using Ver 4.2. Is there some trick to using the latest SW? The TX is using HotSync Ver 5.4.8P. Appreciate any help. Thanks
Post relates to: Palm TX

This data loss issue has been reported to the developer of PD 6.2. Palm/HP, is/are not the owners of the software. The known causes are leaving Palm Desktop open when a Windows update occurs or leaving PD open when shutting down the PC.
There is no way to prevent the loss other than exporting your data on a per data change basis. The best option is to revert back to a previous version of PD as you have done.
The best way to preserve your data is to export the data in each category in Palm Desktop to a separate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://kb.hpwebos.com/wps/portal/kb2/common/article/28734_en.html
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Is there a way to darken the dates (numbers) on ical. After installing Lion I can barely read the dates of the month in ICal

Is there a way to darken the dates (numbers) on the ICal calender. I can barely read mine after installing Lion.

I should note that the time stays on the left of the event name when I re-enter the text (which I had to do all the time before I found the "show event times" button) so I feel like there's a way.

After I upgraded to Yosemite iphoto can't recognize my backup CDs which were created in iLife09. Ihave the original applications install disk and my old hard drive(I upgraded to SSD). How do I get a n iphoto back to read by old CDs?

After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups. HELP

Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager.

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

My phone was working well. i installed some free games and after 2 days u guyz charged me $34 from my debit card. and now i can install any free apps, they keep asking to put my billing info for those. please this is urgent. i want my money back.

hello sir/madam
this is a very urgent and important question. i nedd your assinstance.
i have iphone 3g. i was working well. about 2 months earlier i bought an app of $2.99. after then every thing was okay. but last week i installed some free games and 2 days later itunes send me a reciept via email and you guyz charged me $34. now whenever i try to install free apps they want my billing info. please i need your help and want those money back.
$34 for free games , i will show u the reciept. if its not possible to get the money back i will forced to take proper action.
thank you sir /madam.

The games might be free but I think you've clicked In-App purchase which cost money. You are warned before you accept the In-App purchase. You not that young and you can read so take action if you must. It's your own fault and all purchases are final. Good luck.

Intermittent Internet Connection and VPN clients can't ping internal LAN but connected after installating cisco ASA5512x

Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.

I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA.

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

After instaling ver 3.6 I can't load facebook games. And I can't un-install

Similar Messages

Maybe you are looking for