After Install 10.6.7 Software Update Mircophone Stoped working
Hi Support Team,
Model Name: MacBook Pro
Model Identifier: MacBookPro5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP51.007E.B05
SMC Version (system): 1.33f8
I have above mac book pro & since I installed 10.6.7 software update my Logitech H530 Headset Mircophone stop working.
Sound out put is working fine so I can hear fine
but My on my Skype or on my softphone Microphone not working at all.
I purchased new Logitech H530 but still not help.
Logitech USB Headset:
Product ID: 0x0a0c
Vendor ID: 0x046d (Logitech Inc.)
Version: 10.13
Speed: Up to 12 Mb/sec
Manufacturer: Logitech
Location ID: 0x06200000
Current Available (mA): 500
Current Required (mA): 100
I plug the same Logitech H530 on other Mac with 10.6.6 its working fine.
Any idea what change on on 10.6.7 ?
Thanks,
I too am having the same issue...I updated today and can hear fine but no luck with voice. It shows that there is a line-in device, even when I unplug it shows. Teh internal speakers show a reading but they dont work anywhere but in preferences for the reading.
Any solutions yet?? These updates are becoming quite bothersome. If I wanted to pay $2000 for a laptop that sucked I would have went back to Windows....please help us Apple Gods...
thanks!
Similar Messages
-
Many of my System Preferences will no longer work after installing Mountain Lion. Software Update, Startup Disk, iCloud, Time Machine, Notifications, etc. no longer will launch even though they do show their icons in the system preferences window. I keep getting a drop down window saying I must restart system preferences in order to use with a "Cancel" or "OK" choice. After I click on "OK" the window just keeps reappearing with the same choices and the pane I wish to use still remains inoperative. Third party preference panes DO work.
Reinstalling OSX Mountain Lion did not help. Neither did throwing away preferences.plist.Hi Jeff,
Tried to reply with my iPhone but not easy! Anyway, back on the laptop now. Yes the crash was bad but Tek support at Prism Sound was really good. In the end I rebuilt the whole system on a new disk which took a couple of days with all the plugins, softsynths etc.... but there seemed to be no alternative in my case, and this was agreed with Prism sound as being the only alternative left to me. I still don't really know what caused the crash but ML and Orpheus are both working fine now. Let's face it, you'll have to update at sometime..maybe best to pick some time between projects On balance, I suspect that my problems were unique to my system and that your installation will go ok.
Hope it goes well,
Rick -
After installing a recent java software update(trojan horse) have not been able to open several bookmarked pages.
Was this the Security Update that disabled Java in the Browsers?
If so & you need Java, just reverse these unchecks to checks...
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets -
Can no longer print after 5/2/13 Xerox software update...
After installing the recent Xerox software update that was released on May 2, 2013, we can no longer print to our Xerox machine. Only those who have not installed the update can still print. Anyone else having this problem? Do we know if it is a known issue and a fix is in the works?
Hi, no Xrox printer here to try, bit on one of the updated ones, try this...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?
The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
a. iTunes
b. QuickTime
c. Apple Software Update
d. Apple Mobile Devices Support
e. Bonjour
f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC -
I installed the Epson Printer Software Update that appeared in 'Software Update"' this morning and since then I get an error :
Process:
rastertoescpII [47217]
Path:
/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII
Identifier:
rastertoescpII
Version:
Code Type:
X86-64 (Native)
Parent Process: cupsd [15]
Date/Time:
2013-08-09 11:30:46.469 -0400
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
whenever I try to print anything. I tried repairing permissions and downloaded the update manually from Apple and ran with the same results. I am running OS X 10.6.8 on a 2.53 GHz Intel Core 2 Duo Mac mini and printing to an Epson WorkForce 630Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Reinstall the driver directly from Epson's website. If you are still having problems after the reinstall, you should contact Epson tech support for a solution and/or work-a-round. -
After the new os x software update i cant watch cnet videos or cnn videos
after the new os x software update i cant watch cnet videos or cnn videos
Hello Abel.
Welcome to the user to user Apple Support forums.
I have tired Safari and Firefox on CNN and the video seems to load just fine, also there isn't any widespread issue. So I'm thinking this is a specific issue to your machine.
I don't know why the videos are not playing, I'm assuming you have a fast enough Internet connection, but we can try a few things like installing any and all codecs and running some maintainence and repair functions that might clear the issue up.
Install the software at these two locations and reboot your machine, see if the site works.
Perian (installs additional Quicktime codecs)
FlipForMac (Windows media in Quicktime)
You'll likely come across media that requires these codecs eventually so for all intensive purposes it's eliminating a possiblity.
Also I just noticed the CNN site uses Flash, please update your Flash player plug-in here
http://get.adobe.com/flashplayer/
Please bookmark these sites for later use, Flash get updated often. -
Stuck Pixels after Installing iPhone 2.0.1 Update
Has anyone else noticed any new stuck pixels after installing the iPhone 2.0.1 update?
As you can see in the image linked to below, my 8GB iPhone 3G began displaying a stuck pixel in the upper-left immediately after installing the 2.0.1 update. At first, I figured that this was an average stuck pixel that coincidentally appeared immediately after applying the 2.0.1 update. However, after further examination, I don’t think that this is a normal stuck pixel.
http://skitch.com/macmanx/1igt/stuck-pixel
A few hours later, my mother updated her 8GB 1st gen iPhone, and as you can see in the image linked to below, she now has a vertical line of stuck pixels in the same region as mine. Since her stuck pixels also appeared immediately after installing the 2.0.1 update, I’m beginning to think that my stuck pixel may not be an isolated issue.
http://skitch.com/macmanx/1i88/stuck-pixels
I have tried to restore both iPhones, adjust the brightness, apply light pressure to the stuck pixels, and run the Knox Pixel Fix for iPhone. Neither method worked. To further complicate the issue, the stuck pixels appear to flicker when viewed through the LCD screen of my digital camera.
Stuck pixels are (as the name implies) stuck, they do not flicker. This, added to the fact that the issue occurred immediately after applying the 2.0.1 update, leads me to believe that this may actually be a software issue, possibly involving a conflict between the display drivers in the update and the display hardware shipped with certain iPhones.
If you have also noticed new stuck pixels after installing the 2.0.1 update, I'd love to hear that I'm not the only one seeing this. And, if you have somehow managed to resolve the issue, I'd love to know how you did it.As already pointed out, "stuck pixels" are hardware related. They will be evident all the time, regardless of the particular screen being viewed. If they show only on particular screens, it isn't a dead pixel, but a software/ driver issue. I see a horizontal line in my Unlock Screen that I didn't notice before 2.0.1, but I'm not sure I really looked for it before. However, I don't see it in other screens with a black background such as the Home Screen, indicating it has something to do with the Unlock Screen image, and not the LCD pixels.
Message was edited by: modular747 -
HT5457 how do I install the IOS 6 software update to my Ipad 3G?
How do I install The IOS 6 Software update on my IPad 3G? Itunes is saying it is up to date but it is not. It says it 5.1.1.
Double tap the home button and bring up the multi-task bar. Hold down on one the apps until they all start to wiggle and display a minus sign. Tap the minus sign and close all of the apps. Tap the home button and close the multi-task bar. Reset the phone, hold the sleep/wake and home button together until you see the Apple logo and then release. After the phone restarts, see if you see the same behavior. If you do, the next step to restore from a backup. If that doesn't help, then restore as a new device. Use this support document to understand the restore process. http://support.apple.com/kb/HT1414
If you have to go all the way through restore as a new device and it does not work, then it could be a hardware issue. I've not seen any other posts about screen issues after updates, so one of these should fix it unless there is a problem with the screen. -
Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
iTunes no longer recognizes my airport express.
Error Message:
None of the selected updates could be installed.
An unexpected error occurred.
Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
Any sugestions?I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.
-
I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?
Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference? -
After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen. This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus. Is this normal or do I have to uninstall this update?
After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen. This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus. Is this normal or do I have to uninstall this update?
-
No audio Mac Pro after installing OS 10.7.5 Update 1163
No audio on Mac Pro after installing OS 10.7.5 Update 11G63. Tried uninstalling iTunes Dock Notifications but it wasn't installed in the first place. No Audio on iTunes, youTube, Chrome, etc.
Hello Howard,
Thank you for using Apple Support Communities.
You can use the following article to sort your your audio issues on your MacPro:
Troubleshooting issues with no audio from built-in speakers on Macs
Regards,
Jeff D. -
Microsoft Word 2008 refuses to work for me after installing the most recent Mavericks update, 10.9.1. It is 2008, yet Excel and Powerpoint work just fine. Help!
I suggest you do one of two things:
1. Upgrade to Office 2011 for OS X.
2. Try the freeware, Libre Office.
Maybe you are looking for
-
Can't print a one page month view using ical 3.0.1
I can't seem to print a page view of a month using ical 3.0.1- the newest with Leopard. When you go to the print window, view only gives me day or list as a choice. There isn't a monthly option like in the support quides for ical 2.0. Has anyone had
-
Error checking transport group configuration in System BQS
Hi Everyone, I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the qualit
-
I have photoshop CS4. How do I set the it to save my photos as CMYK "Uncoated" US Swop?
I have Photoshop CS4. How do I set it to save my photos as CMYK Uncoated US Swop for newsprint on a webpress. I can't find the proper setting, only coated.
-
Downstream dropped to a third of what it was and n...
Hi there, Have had builders in and they tripped over BT wire and reconnected it a day later. This was about 3 weeks ago. Since then, my downstream has been a third of what it has been for the last year or so (I always get around 2.8mbps downstream).
-
All BAPIs related to a Business Object
Hi All, Is there any way by which we can search for all the BAPIs related to a particular Business Object? For ex. can we write a report prgram through which we can search for BAPIs related to a Business Object. Any pointers in this regard would real