After install 10.9.2 update Safari don't work on early iMac 2008

Ich kann nicht Safari öffnen nach dem upgate 10.9.2 was kann ich tun?

Haben Sie Mackeeper? Ob Sie haben, lesen Sie:
https://discussions.apple.com/docs/DOC-3036
Haben Sie Java von http://www.java.com/
Wieviel Raum haben Sie, und Wieviel sind an den Hard Disk?

Similar Messages

Webmail in Safari don't work after updating to iOS6.

Webmail in Safari don't work after updating to iOS6. Logging on to office webmail account are redirected. Webmail works with Google Chrome, but it doesn't sove the issue with Safari. Any suggestions on how to configure Safari?

Try this
I was having this problem, seem to happen when waking computer, once finally connected network works great.
You need to edit your network preferences to order the network selection list. Goto this support page Using network locations (Mac OS X v10.6 and later) and edit your selection list.
I also created a "HOME" location and deleted all networks except wifi. Put MB to sleep woke and safari worked great. Still I re-ordered the networks under Automatic putting wifi at top, sequence is from top down. Don't forget to click Apply. Have fun

Problems shutting down after installing 10.5.3 update?

Has anyone had any problems shutting down there IMac's after installing 10.5.3 update? I've tried shutting down twice and the image that appears when shutting down seems to go in an endless loop an doesn't shut down.

Can you restart from the menu and hold the shift key down, until the Mac
boots in a SafeBoot login screen; then choose Disk Utility (shortcut under
GO in Finder window, to Utilities folder) and run 'repair disk permissions'
then restart the computer normally...(?)
You may also have to consider starting the computer from the OS X
installer disc and choose from an option menu there (not to install)
and choose to use Disk Utility from the booted installer disc, to run
'repair disk' from there? You could also run 'repair disk permissions'
while booted from that installer disc, but maybe you'd still have to
repair those from the running system for best effect once it is back
running from the hard drive's system.
Some minor issues can happen after an update, usually just repairing
disk permissions before installing the update, and/or running up in
SafeBoot, can help. There are other things to try and do, if these don't
help that much. The state of the system prior to an update is important;
since an update can't fix anything otherwise non-related to an update.
Maintenance issues aside, after you repair disk permissions, safeboot,
and restart, if there still is an issue, you could try to download the Combo
OSX 10.5.3 update file and install it over your system; and then repair
disk permissions again after it finally restarts normally.
Was the 10.5.3 update a smaller (delta) file or was it the Combo (large) file?
Good luck & happy computing!

After upgrading to Mac OS Lion, even after installing Java manually, some web pages don't download and appear blank whereas Firefox works

After upgrading to Mac OS Lion, even after installing Java manually, some web pages don't download and appear blank whereas Firefox and Opera work. Can someone help?

Might be a third party Safari addon that was compatible with Snow Leopard but not Lion that's preventing pages to load. That add on may not have any effect on the other browsers, just Safari.
Read here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Also, if you have Little Snitch or Peer Guardian or anti virus sofware installed on your Mac, that might prevent pages to load also.

Bluetooth module not present after installing 10.5.7 update from 10.5.6

After installing the 10.5.7 update on my unibody macbook, I can not see the bluetooth option in the mouse preferences. and when i go into the mouse preferences i get the following error message. "The Bluetooth tab of keyboard & mouse preferences is hidden because you don't have a Bluetooth module installed or attached to you computer".
This occured after i installed 10.5.7 update. It was working fine before this.
I have tried restarting my system without success.
Is there a way to roll back to 10.5.6?
Message was edited by: psybonix

Update:
Applied Bluetooth firmware update this weekend and so far my mighty mouse disconnects a little more often than it did before the update. I was beginning to think it was solving itself as the disconnects seemed fewer and less often until the firmware update. May be coincidental, but it looks like the firmware update, at the very least, was not meant to address this particular problem. I guess I'm going to have to buy a wired mouse.
Let's see now, starting with 10.5.5 my MBP has been plagued with frequent wifi disconnects and starting with 10.5.7 the bluetooth drops out frequently. This is very aggravating.

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

After installing the latest ipod update some of my purchased songs no longer play

After installing the latest ipod update some of my purchased songs no longer play (though they still play on the computer). When I tested it on another computer it claimed that computer was not authroied to play these songs even though I was just playing them directly off the ipod. Even more strange is that I alos have a number of songs loaded on my itunes from albums I loaded and I am fairly sure these songs were ones I recorded rather than purchased but now they appear on my purchased list.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After installing 10.7.2 update the OS does not boot.Any thoughts????

After installing 10.7.2 update the OS does not boot. I tried to recover from recovery hd disk but after 3 attempts I am still not able to download lion! Any thoughts????

Try the Lion Community, and bookmark the notebook community (this is not).
You will probably need to provide others with more information too.
Cloned backup? TimeMachine? using Disk Utilityh to repair Lion from the recovery partition (comnand r on startup)

After installing the last software update, my printer (an Epson Stylus Photo R1800) immediately ceased to function. How do I fix this?

After installing the last software update, my printer (an Epson Stylus Photo R1800) immediately ceased to function. How do I fix this?

Try resetting the printing system.
Reset Printing System
Network printer or attached to the computer?

On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone

On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone.

    Hi JoeC695,
That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
Thanks,
PamelaF_VZW
Tweet us vzwsupport

Low Signal Strneght after installing 6.0.2 update

Hi,
I am recieving low signal strneght after installing 6.0.2 update.Any fixes ? or anybody

Oops I meant cellular w/o the data.
You can try doing a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up.
if that doesn't help then try - settings - general - reset - reset network settings.
if that doesn't help, then contact your phone carrier and see if they can help.

Unable to access media card after install of 10 software update

After installing the software 10 update, i'm not able to access the media card from the phone or when plugged in to the laptop. from the phone settings menu, i cant choose to save any file into the media card - its grayed out. Everything was working fine until I installed the update. Is this a common problem? did the update wipe out all the media card contents?

Have you tried removing the media card and re-inserting it?

HT6114 fans on full bore after installing 10.9.2 update. fix?

fans on full bore after installing 10.9.2 update. fix?

Same here. I've reset pram, smc, checked for any CPU intensive apps, bought new battery, even opened case and blew dust out of fans. Was going to do a heat sink clean but another thread brought up the idea of Mavericks being the culprit. I hadn't thought of it before but I'm starting to think it has to do with Mavericks.
MacBook Pro (late 2008)

After installing yosemite, tried to update apps but an old apple id is shown with no way to edit. how can i update apps wait my current app;e id and password?

after installing yosemite, tried to update apps but an old apple id is shown with no way to edit. how can i update apps wait my current app;e id and password?

You need to delete and redownload them to do that. This may require repurchasing paid ones.
(116535)

After installing Lion, the Software Update "can't check for updates because of a network problem.But I've no network problem. My internet is working properly. could you help me?

After installing Lion the Software Update "can't check for updates because of a network problem". But I've no network problem. My internet is working properly. Could yoy help me?

Hi All
Same problem this morning but now resoloved.
Update require using the following url support.apple.com/kb/DL1437 update for lion 10.7.1
updates now work with this update
Hope this helps
Thanks

After install 10.9.2 update Safari don't work on early iMac 2008

Similar Messages

Maybe you are looking for