After install, JFM doesnt work (windows)

i'm having a problem where i can install JFM just fine on my desktop and it works fine. Unfortunately i need to do a presentation of it and when i tried to install the JMF onto a laptop, after the install finishes, it doesnt get picked up. When I try to compile i get errors saying that my syntax is all wrong. Of course, it compiles with out a problem on my desktop. I've tried 2 different laptops and had the same problem both times.
I'm using eclipse to compile my program on both my desktop and the laptop i'm using to present.

hi!
why you need to compile the entire code on laptop again?? you better put the jmf.jar into some directory under your project tree, and in eclipse point the jmf.jar. now you can build your own jar file and carry any where and give a demo. but in case you have to show the code as well, you check the path location of jmf.jar into your desktop and laptop both, if they are in different place this may happen.
i have just assumed all situation, so this may not help you, but you may give it a try.
GREETS :)
Aniruddha

Similar Messages

  • Itunes 7.0.2 Won't Open after install - Got it working (Windows XP SP2)

    The Symptom
    I spent the whole day yesterday trying to fix this problem. Could install Itunes 7.0.2 and Quicktime ok, but like others on this forum, once installed it flashed up the license screen for a couple of seconds and then nothing!! Very frústrating. This was on my father-in-laws PC and the same install had worked fine on my PC at home.
    At the sametime, I had been trying to install Yahoo Messenger 8.x, this too was behaving oddly, in that it installed ok, but did not produce any short cuts or program executables.. so you couldn't run it... and yet, you could install v7.5 of Messenger ok, as you could with Itunes 6.5 and both would ran perfectly well. Got the old versions from www.oldapps.com by the way.
    What I tried first, but failed for me.
    I tried other suggestions on this forum as well as from other places:
    1) Turning off my virus checker and firewall, I was using F-Secure. I didn't believe it was this as I had used the same software on my PC at home and the install was ok there. Still didn't run after the install.
    2) Tried uninstalling Itunes and QuickTime several times and rebooting. Still didn't run after the install!
    3) Tried installing 6.x of Itunes which worked, and then upgrading to v7 of Itunes, which upgraded ok but of course then wouldn't run!
    The solution that did work for me-
    On browsing the net for a few hours, which is really what you want to do on New Years eve!?!? I happened to skim read a short piece by someone who had mentioned that their installation of Yahoo Messenger 8.x had failed due to their installation of Internet Explorer v6.x - their IE worked ok, but some install errors for Messenger had seemed to point to it anyway - read that here: http://www.winehq.org/pipermail/wine-bugs/2006-August/036969.html
    So, with this in mind, I decided to upgrade the version of I.E. to v 7, as my father-in-law was running v6.x.
    So:
    1) I uninstalled Itunes and Quicktime using Add/Remove programs, nothing else.
    2) (You may not get this issue as I did whilst trying to install IE7 so you maybe able to skip this step)
    When trying to install IE7, it came up with the error "Setup could not verify the integrity of the file update.inf. Make sure the Crytopgraphic service is running on this computer", so I had to follow Methods 1-5 in this MS Article in order just to install IE7: http://support.microsoft.com/kb/822798/en-us once those methods had been followed IE7 installed a-ok.
    My Father-in-laws machine is a little knackered so you may not have any issues in installing IE7, so I suspect you'll be able to Step 2.
    3. Installed IE7 (http://www.microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30 -081805B2F90B&displaylang=en)
    4. Reinstalled Yahoo Messenger 8.0 and Itunes 7.0.2 and both ran up without an issue just before midnight so I was able to go off and enjoy new year with some booze and fireworks
    Conclusion
    So, my conclusion, and i'm no expert, is that both Yahoo Messenger 8.x and Itunes 7.0.2 rely on Internet Explorer, which I think is a given!.. If something in IE isn't to it's liking it'll fail to run, i.e. a registry entry not quite right - or maybe some port settings, I don't know.
    Of course it may have also been the cryptography service error that I resolved in step 2 above.
    My advice, would be to either remove Itunes/Quicktime as in Step 1 and then upgrade to v7 of IE or try reinstalling v6.x of IE before attempting the Itunes install again.
    Good luck.
    Oh, and seperate to the above issue, if anyone received a vbscript error when trying to install Itunes, I had to enter the following command at an MSdos command prompt:
    regsvr32 vbscript.dll
    and then kicked off the install again.
    Hope something in the above helps,
    Marcus

    If re-starting doesn't help, it could be iTunesHelper that prevents installing.
    Locate it in System Preferences>Accounts>Login Items.
    Select the item and remove it by clicking on the minus sign.
    Log out and in again and try installing iTunes again.
    M

  • Adobe reader has stopped working error message after installing reader XI on windows 7

    Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
    Does anybody know why ?

    Dear Pat,
    Thank you for your reply.
    It is Ver. 11.0.06 for Acrobat XI
    No, I can't open the Reader at all.  The error message box popped up immediately when I run the Reader

  • Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL. When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up. When I log in with my Apple ID I just get: The Apple ID you entered couldn't be found or your password was incor

    Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL.
    When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up.
    When I log in with my Apple ID I just get:
    The Apple ID you entered couldn't be found or your password was incorrect. Please try again.
    I have however made sure that this is the correct Apple ID and password that I am putting in. In the Mac App Store it works.
    Do you have any solution?
    I am running Mavericks 10.9.2.

    To post a screenshot click on the "Camera" button at the top of the reply box and upload it there.
    MtD

  • Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

    Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
    Post relates to: HP TouchPad (WiFi)

    @MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
    See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Not showing company list after installing B1 2007 on windows 2003 standard

    Hi gurus,
    I am facing a problem regarding B1.System not showing  company list after installing B1 2007 on windows 2003 standard edition.
    Plz help me.
    Thanks in advance
    Regds
    Maddy

    Hi Maddy,
    Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
    Vasu Natari.

  • After installing Acrobat/Reader on Windows 7 or Vista, icons of all applications/file-types change t

    After installing Acrobat/Reader on Windows 7 or Vista, icons of all applications/file-types change to Acrobat/Reader icon and double clicking on any icon/file launches Acrobat/Reader (instead of the native application associated to the file type). Is there an easy fix for this problem?

    I'm sorry, but I wasn't aware of a native PDF viewer for Windows.
    Nonetheless, if you want to change your default PDF application in Windows, you need to right click on any .PDF file, select "Properties",
    then "Change",
    then select the program you want to open a PDF with.

  • Print to Go stopped working after install of KB2992611 on Windows 7 for x64 system

    A large number of critical and importatnt Microsoft security related updates showed up on 11Nov2014 that were installed. Subsequently several failures happened after the restart (i.e. IE would freeze when started, Print to Go
    stopped working - indicated that there was no connection to the Internet, the PrintToGoLog.txt  had much more detail).
    Other BB playbook users reported similiar problem after one of the updates KB2992611 was applied, 
    After KB2992611 (Security Update for Windows 7 for x64 system) was uninstalled, Print To Go functioned properly. Unfortunately, I.E still failing. Firefox is OK.
    Solved!
    Go to Solution.

    Hi,
    I recently updated by Q10 to the latest Rogers 10.3.1 software release, and was going through my apps to verify they were all still functional.  I found that Print-to-Go was not working. As I do not frequently use the app, I do not know if the recent device software update is the cause.
    After a bunch of searching around the web, I came across two possible issues:
    1) SSL 2.0 setting within the Internet Options settings on my PC
    2) Windows Update kb2992611
    My PC is running Windows 7 64-bit Pro, with latest Print-to-Go driver and BB Link installed.  The problem I encountered is that when printing from the PC the pop-up window would fail to load the page that allows you to sign in to Blackberry ID and verify the link to your device. The https://ptg.blackberry.com page would return a server error.
    Enabling SSL 2.0 within the Internet Options on my PC appeared to fix this problem, as I was able to access the BBID login page. However printing documents would still fail.
    I then uninstalled Windows Update kb2992611. This fixed the problem. Print-to-Go functioned as expected, and documents would appear on my device.
    I then disable SSL 2.0 within the Internet Options on my PC, and there was no effect. Print-to-Go still functioned.
    I then reinstalled Windows Update kb2992611 and Print-to-Go appeared to work (ie you could sign-in with BBid), but printing of documents would fail and give an error message. Uninstalling the Windows Update again fixed the problem and PTG would work fine.
    So, it appears there is a conflict between Print-to-Go and Windows Update kb2992611.  
    Will Blackberry be updating their desktop PTG driver so that it is compatible with this Windows Update?
    The Windows Update addresses a security issue, so I'm not comfortable leaving my PC with this update not installed.

  • DVD Drive disappeared after installing Boot Camp on Windows 8

    I am running Mountain Lion and I bootcamped Windows 8... this is a fresh install.
    1. I installed Windows 8 and the DVD is still working
    2. I installed Bootcamp software via DVD and was asked to reboot
    3. I reboot my iMac
    4. Now, my friggin DVD doesnt work anymore...
    5. I look at My Computer and it's gone.
    6. I look at the device manager and it's not there
    7. I showed hidden devices and the hl-dt-st dvdrw ga32 is there (disabled of course)
    8. i am writing to apple community after a night of searching for a solution in vain.
    please help me. i really need my DVD drive
    thanks in advance

    thanks for the response
    1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
    2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
    3. Ive tried those before, also even editing the registry but it didnt work.
    It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

  • GDM doesn't show up anymore after installing catalyst, Xorg works fine

    Hi,
    I just installed catalyst-hook from Vi0L0 and my situation is this: when I boot my computer the output on the tty1 gets stucked after the checking the filesystem with systemd-fsck and nothing appears after that, no blinking cursor, no prompt that asks me for a login, no nothing, nothing progress in both textual and graphic modes ; however, if I switch to the 2nd terminal with ALT + F2 I can login and start Xorg via the usual
    startx
    and apparently no session is ever being initiated before that so whatever is happening on tty1 must prevent xorg from even starting a new session.
    What I tried
    The main problem is that I have absolutely no idea what this is about, It could be anything ranging from modprobe to gdm, but since I have an audio card that only works properly when the appropriate configuration in
    /etc/modprobe.d/modprobe.conf
    gets loaded and I can even start a desktop session, I'm assuming that the core stuff on my system ( kernel modules and Xorg ) is working properly .
    [ Test 1 ]
    aticonfig --acpi-services=off
    doesn't fix anything and doesn't make a difference at all
    [ Test 2 ]
    /etc/gdm/custom.conf
    # GDM configuration storage
    [daemon]
    AlwaysRestartServer=true
    [security]
    [xdmcp]
    [greeter]
    [chooser]
    [debug]
    Apparently this should fix the same problem experienced by KDM users; as far as I can tell this changes nothing .
    Bottom line
    I can't get to the GDM login anymore after installing catalyst-hook, I can use the fglrx without any major issue, I can start a desktop session with startx from tty2 and tty1 gets stuck before anything "graphical" can actually appear on the screen and probably non even Xorg gets any chance of running on tty1 .
    What kind of problem is this ?

    arkur wrote:
    clfarron4 wrote:
    Have you seen the catalyst-fix-gdm or the AUR package?
    What happens with another different DM?
    Also I can't find that package with pacman, I also would like to fix this by myself, not because I don't trust the author of the package, but I just don't want to install too many packages and for the core things I would like full access to the essential configuration .
    Anyway it looks like that GDM is the problem this round.
    You won't find it with pacman, because it is in the AUR and you will to compile it to install it.

  • After install applications not working

    After installing Leopard I have had many problems. Specifically, the computer won't sleep, iWork & iLife software not working well. Pages files won't open. DVD Studio Pro won't compress. Compressor won't compress in any format. Help

    Thanks for the quick response! I had to go back to work. But in answer to your questions.
    Yes I backed up my data.
    I don't know what you mean by input managers so I would say no.
    I have 150GB drive with 81GB left
    In another forum someone suggested I repair permissions through disk utility. So I did that.

  • Flash player saying installed but doesnt work

    i have a toshiba laptop with internet explorer 6 and its an
    xp machine
    basically some websites that need flash redirect me to the
    adobe flash player site and i click install and it installs.
    then an animation plays when its successfully installed
    but then when i go back to the website that requires
    flash...flash doesnt work!
    im going crazzy now cos no-one knows what to do.
    any suggestions. any???? xx

    Well, first of all you might want to get IE7. Just go to
    filehippo.com. In any case, go to start>control
    panel>internet options. Go to the security tab and set the
    internet zone to default>apply. Then go to the privacy tab and
    click on sites. Make sure the website is allowed to set cookies.
    Then set the cookie slider to medium or medium-high. This internet
    options screen is different for IE6 and IE7, so your buttons may
    vary slightly from mine since I have IE7. Really, IE7 is better in
    my opinion and your favorites will carry over.

  • Preventing help files being added to start menu after installing an application in windows 8.1 enterprise

    Hi Guys
    when we install an Application in windows 8 family, we see that in addition of Application executable file, user manuals (.chm) and PDF & other files related to that App are added to start menu (when we click down Arrow which shows all programs) and
    so the start menu gets quit messy.
    is there any settings to make only applications executable file be added to start menu & prevent other types of files related to that App being added here?
    thanks in advanced

    Hi John,
    This issue is related to the programs package we installed.
    • An installation package contains all of the information that the Windows Installer requires to install or uninstall an application or product and to run the setup user interface.
    • The developer can specify installation context, and based on these properties, Windows Installer automatically redirects the values of folder properties and registrations to locations.
    • The shortcut is added to the profile by these context
    We could right click these file and could find out they are the shortcut mentioned above.
    For more information about Windows Installer, please refer to the following article.
    http://msdn.microsoft.com/en-us/library/windows/desktop/dd765197(v=vs.85).aspx
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support
    hi Fangzhou
    useful link
    thanks a lot

  • I cannot connect to my iMac or my Mackbook from my Windows 7 PC after installing Lion. Worked fine with Snow Leopard

    I have a 2009 iMac and a mid 2007 Macbook. I also have an HTPC running Windows 7. I can connect fine to the HTPC from either the iMac or the Macbook, however, I am completely unable to connect to my Macbook or iMac from my PC. This was never a problem prior to upgrading to Lion from Snow Leopard. Please be advised that I know how to set my network up and have tried everything possible. I upgraded my iMac to Lion first and noticed the problem. After checking my settings I was stumped. I noticed that my PC could still connect to my Macbook running Snow Leopard. I then, today, installed Lion on my Macbook and replicated the problem I was experiencing on my iMac. Any suggestions?

    The same happens to me!!! Any help out there?

  • After installing new operating system windows 7 on imac 27, mac stopped working.

    We bought new imac 27, late 2012. Installed windows 7, mac stopped working. We restarted mac os, but system cant see hard disk. Cant install mac. What to do?

    How did you install Windows 7?  Via Boot Camp, using a Windows 7 system builder disk, or with Parallels or VMWare's Fusion?
    If you installed using Boot Camp, it sounds as if you goofed and installed Windows onto the Mac partition instead of the Windows partition.  What happens when you hold down the Option key when you restart the Mac?  Do you see a Mac partition and a Windows partition?
    I would suggest seeing if you can use the Recovery mode on your new iMac to reinstall your iMac's operating system if you installed Windows over it by mistake.  Please see this Apple Support document on how to accomplish this:
    http://support.apple.com/kb/PH11273?viewlocale=en_US&locale=en_US
    If you installed Windows using Parallels or Fusion, I can't help you, as I've zero experience with either.

Maybe you are looking for