After install of 8.1.5 SQLLDR.EXE wont exit after sucessful load.

After installing 8.1.5, SQLLDR.EXE wont exit after sucessfully loading a table. My DOS window just hangs. Has anyone had this problem? Version 8.1.5 is the highest license we have. I was on 8.0.5 and it worked ok.

Sorry to reply to my own post but this may help someone else.
The problem is that the Solaris 10 Express install doesn't install the /kernel/misc/sparcv9/kbtrans module. I just copied it before I rebooted after the first CD install.
(1) At the <Press Return to reboot the system> {"!" exits} prompt, enter "!"
(2) The new root partition will be mounted as /a.
(3) Copy the kbtrans file
cp -p /kernel/misc/sparcv9/kbtrans /a/kernel/misc/sparcv9/kbtrans
(4) Reboot
This is just a workaround - Sun needs to fix the install.

Similar Messages

After installing ios i'm can't connecting wi-fi, after installing ios i'm can't connecting wi-fi

after installing ios i'm can't connecting wi-fi, after installing ios i'm can't connecting wi-fi

Could you please be clearer, Could you please be clearer, could you please be clearer?
You cannot connect at a wi-fi hotspot, or on a secure network? Do you show any signal strength? Do you show any available networks?

After installing zone Alarm extreme 10, firefox.exe 32 stays running in the background after closing, making it not possible to open it again.

After installing the latest Zone Alarm Extreme v10, on windows 7 x64, when I close firefox, the window closes but firefox.exe 32 remains running in the background, which makes that when I want to open firefox again, after about a minute I get the error that an instance of firefox is still running. I go to task manager and end task of firefox.exe 32 and then open firefox again.
This is now happening regularly.

This seemed to come out of the blue, very much as described by anima42. I also am a Ubuntu 10.04 user. I have pondered on the first reply above, and though I don't, and didn't, use Tabberwocky, I was using Tab Mix Plus. Having removed this, the problem seems to have gone away. Another possible clue as to what went wrong: I use a constant Firefox profile located in my home directory. I dabbled with Ubuntu 11.04 a week or so ago, which runs (I think) a more updated Firefox. This Firefox was operating on my default profile, as you would. It may have broken something so it now doesn't play nicely with the 10.04 setup. Just surmising.

After installed osb, can't run config.exe to create a domain in windows7

Hi,
I am a newbie to weblogic and currently trying to learn it. I have installed weblogic 11.1.1.5.0, Oracle XE, and also create a schema. However, when I installed osb, I can't run config.exe(directory C:\oracle\Middleware\home_11gR1\wlserver_10.3\common\bin ) to create a domain. my computer is windows7, 64bit. I try to run config.exe as a administrator but no response. And there is another thing frustrating me, in the start menu, when I click the shortcut of config.exe or uninstall in the Oracle OSB 11g - Home1 folder, it just say I don't have access permissions.
when I installed SOA, I alse met the same problem like OSB. btw, I have installed these software in other PC which run windows XP, and there is no problem happen!
Here is the software I need to install
weblogic 11.1.1.5.0
Oracle XE
soa 11.1.1.3.0
osb 11.1.1.3.0
So anyone can help?
Thanks in advance.
Daniel

Hi,
I am a newbie to weblogic and currently trying to learn it. I have installed weblogic 11.1.1.5.0, Oracle XE, and also create a schema. However, when I installed osb, I can't run config.exe(directory C:\oracle\Middleware\home_11gR1\wlserver_10.3\common\bin ) to create a domain. my computer is windows7, 64bit. I try to run config.exe as a administrator but no response. And there is another thing frustrating me, in the start menu, when I click the shortcut of config.exe or uninstall in the Oracle OSB 11g - Home1 folder, it just say I don't have access permissions.
when I installed SOA, I alse met the same problem like OSB. btw, I have installed these software in other PC which run windows XP, and there is no problem happen!
Here is the software I need to install
weblogic 11.1.1.5.0
Oracle XE
soa 11.1.1.3.0
osb 11.1.1.3.0
So anyone can help?
Thanks in advance.
Daniel

Mac book Pro won't start after installing a update, Mac book Pro won't start after installing a update

I installed a update on my Mac book pro, now when I try to start it, it'll come up with the apple logo and a loading bar below it, gets to about 1/4th and shuts down every time.

Hi Jacobmitchell92,
If you are unable to start up past a grey Apple screen after doing a software update, you may find the following articles helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem.
http://support.apple.com/kb/TS4636
Regards,
- Brenden

After installing the add-on compatability add-on, Firefox will no longer load web pages or allow me to enter anything in the address bar and has added an additional title bar at the top of the page.

When I open Firefox now, instead of opening up the standard Mozilla start page, it simply opens up a new tab page. Typing in the address bar and then hitting enter results in the address bar being cleared and the page staying the same. Attempting to send feedback via the add-on just opens another new, blank tab. For some odd reason, the Windows title bar has also come back above the orange Firefox button and the tabs.
I am unable to access the add-ons page to uninstall the add-on compatibility add-on to see if that will solve my problem and I have tried uninstalling the beta and reinstalling it, but the problem still remains.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

HT4972 myipod touch 4th gen just died after installing the newest itunes? My comp wont even pick it up, not to mention itunes, help

I was asked to install the newest itunes and my software on my ipod just died. its dead so it does a cycle now over and over. it starts with an apple on it, apple fades away and the whole screen proceeds to light up and stay that way untill it cycles and goes back to dieing and shows the battery charging in red till the apple comes on again. My computer wont even pick up that there is a drive plugged into it. Also when i was installing the newest itunes on my comp, there was a error msg saying" ipod service..." something.... thanks Connie
<Edited by Host>

Try:
iOS: Not responding or does not turn on
iOS: Device not recognized in iTunes for Windows
You are not address ing Apple here. We are just users like yourself.
I also requested that Apple remove your email and text number.

After installing Yosemite, all office for mac 2011 apps crash after opening

Using 2013 MBP, installed Yosemite Friday and when opening Word, Excel, Powerpoint, & Outlook, they open for 5 seconds and then error out and crash. Any ideas? Thanks

Completely uninstall Office. Reinstall it from scratch using the original media. If you don't have the uninstaller then follow these procedures for getting it all removed:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.

Where has the hard drive gone after installing lion?, where has the hard drive gone after installing lion?

I'm looking in finder but can no longer see the hard drive. Where has it gone to?

If I understand correctly, you can edit what is shown in the side bar within the "Finder Preferences".
under the "sidebar" tab tick the boxes of the things you want to be shown in the side bar of Finder.
under the "General" tab tick the boxes of the things you want to be shown on the desktop.
Hope this is what you are after and this helps.

XP wont start up after install in boot camp??? Wont format either?

Can anyone please help.... I am trying to use boot camp to install windows xp and i go through all the steps fine, i partition, and then start the install. It lets me select the partition and then it installs. It restarts then nothing. It wont start up in windows? I dont know what i am doing wrong please help i need this to work asap. Thanks in advance.

Hi and welcome to Discussions,
sounds like you are the 'victim' of the newer XP install CDs which somehow don't give you the chance to reformat the destination partition during the XP install process.
The BootCamp Installation Guide clearly state that you have to reformat the WIndows partition from within the Windows installer.
frederic1943 has posted a workaround to this which can be found in here http://discussions.apple.com/message.jspa?messageID=10179186
Hope it helps
Stefan

After installing Firefox 4, [JavaScript Application] window keeps popping up after whatever I click.

This is what the window says:
[Exception..."Component returned failure code : 0x80004005(NS_ERROR_FAILURE) [nsIStringBundle.GetStringFrom]" nsresult : "0x80004005 (NS_ERROR_FAILURE) location : "JS frame : : XStringBundle : : getString : : line17"]

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

After install LabVIEW 8.6, some of my programs can't be loaded.

The error is:
LabVIEW 8.6 development system has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Anyone has experienced the similar problems? Is that because of the bugs of 8.6?
Thanks.
------- LabVIEW 2009, So Easy, Even a Therapist Can Do It -------

smercurio_fc wrote:
Do you know something we don't?
Looking at the LabVIEW 8.6 Known Issues document, I cannot see anything obvious.
LabVIEW Champion . Do more with less code and in less time .

After installing Lion, word, excel and powerpoint cannot be opened, After installing Lion, word, excel and powerpoint cannot be opened

My word, excel and powerpoint tabs are with 'no entry' sign. When i try to open, it says "apps not supported by powerpc. What does this mean? Do i need to reinstall my office?

JrPantel wrote:
How about version 2008?
2008 will work in Lion, with a glitch or 2, I would suggest 2011.

Phone will not turn on after installing new updates?, phone will not turn on after installing new updates?

my iphone asked if i wanted to update it. i selected yes.. then about 10 mins later it shut off. thats been 3 hours ago and now it wont turn on. ive only had it for a week. what do i do??
ive tried charging it and i pluged it in to my computer.. i help down the power button. nothing seems to work.

1. Charge with the AC adapotor for at least 30 minutes.
2. Reset the phone: press both the home and power buttons for up t0 1 minutes, releasing when the Apple logo appears

Unable to launch After Effects CS6[Try] after installing (Stopped Working)

Hi
So after installing. I tried to launch AE, then during initialization or loading, it will prompt a message "Has stopped working".
I was able to install AE CS6 and launch it properly on my laptop but I am having difficulties launching it on my desktop.
Desktop Specs
Laptop Specs
CPU: i5-3570k
GPU:
ASUS Radeon HD 7850
Intel HD 4000
note: Using Lucid Virtu.
Motherboard: Asrock Pro 3 z77
Ram: G.Skill Ripjaw X 8gb dual kit 1600mhz ddr3
Storage:
SSD: OCZ Vertex 4 128gb [OS]
HDD: 1tb Seagate Barracuda 7200rpm
OS: Windows 8 Pro 64-bit with media center
CPU:Intel® Core™2 Solo processor SU3300/SU3500 (3 MB L2 cache, 1.20/1.40 GHz, 800 MHz FSB, 5.50 W), supporting Intel® 64 architecture
GPU:
Mobile Intel® GS45 Express Chipset with integrated 3D graphics, featuring Intel® Graphics Media Accelerator 4500MHD (Intel® GMA 4500MHD) with up to 1759 MB of Intel® Dynamic Video Memory Technology 5.0 (64 MB of dedicated video memory, up to 1695 MB of shared system memory), supporting Microsoft® DirectX® 10
RAM: 3gb of ddr3 1033mhz two module
Storage: 250gb WD Blue 5200 rpm HDD
OS: Windows 7 Ultimate 64-bit
Event Viewer LOG
Event 1
Event 2
Event 3
Event 4
Faulting application name: AfterFX.exe, version: 11.0.0.378, time stamp: 0x4f6d63ab
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x00000000011cb03d
Faulting process ID: 0x478
Faulting application start time: 0x01ce2baea1dc2c6a
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\AfterFX.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: ee78c1ad-97a1-11e2-bf55-bc5ff44842d6
Faulting package full name:
Faulting application name: Adobe QT32 Server.exe, version: 6.0.0.0, time stamp: 0x4f6d5e4e
Faulting module name: QuickTime.qts_unloaded, version: 0.0.0.0, time stamp: 0x50890e53
Exception code: 0xc0000005
Fault offset: 0x6ee2cce9
Faulting process ID: 0x103c
Faulting application start time: 0x01ce2baea914aa1d
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\32\Adobe QT32 Server.exe
Faulting module path: QuickTime.qts
Report ID: e7563660-97a1-11e2-bf55-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: Adobe QT32 Server.exe, version: 6.0.0.0, time stamp: 0x4f6d5e4e
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process ID: 0x103c
Faulting application start time: 0x01ce2baea914aa1d
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\32\Adobe QT32 Server.exe
Faulting module path: unknown
Report ID: e7428280-97a1-11e2-bf55-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: Adobe QT32 Server.exe, version: 6.0.0.0, time stamp: 0x4f6d5e4e
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process ID: 0x103c
Faulting application start time: 0x01ce2baea914aa1d
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\32\Adobe QT32 Server.exe
Faulting module path: unknown
Report ID: e708bde9-97a1-11e2-bf55-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Here are some workaround/fix I tried to do:
Uninstal and re-install.
Uninstall, clear avery adobe product, remove paths and traces, relaunch, and then re-install.
Same as step 2, with firewall turned off, Anti-virus removed.
Run installation with Administrator rights.
Launch program via Compatibility settines Vista, Vista SP1, Vista SP2, Windows 7
All drivers are updated and reupdated.
Re-installed all GPU drivers.
Refreshed my Wndows 8 OS.
Reformated my Windows 8 OS then Installed AE cs6.
Installed AE on my F drive instead of C [C drive is an SSD and F Drive is an HDD]
I am able to see the AE CS6 splash screen but it will prompt a message "Has Stopped Working".
Other things to take note:
I am able to launch Renderer Machine without any issues.
I am also able to launch other Adobe Products that came along with AE CS6 try version.
Latest Quicktime version is installed.

Hi Todd,
Thanks you for replying.
After updating to 11.0.2, I am still unable to launch AE CS6.
Event LOG
Faulting application name: MsiExec.exe, version: 5.0.9200.16384, time stamp: 0x5010a60b
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process ID: 0xe44
Faulting application start time: 0x01ce2bbe73884a20
Faulting application path: C:\Windows\syswow64\MsiExec.exe
Faulting module path: unknown
Report ID: b15899ff-97b1-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: GPUSniffer.exe, version: 0.0.0.0, time stamp: 0x5059906c
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x000000000004f657
Faulting process ID: 0x164
Faulting application start time: 0x01ce2bc0b512cd76
Faulting application path: F:\Program Files\Adobe\Adobe After Effects CS6\Support Files\GPUSniffer.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: f2ea4476-97b3-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: AfterFX.exe, version: 11.0.2.12, time stamp: 0x505998cf
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x000000000004f657
Faulting process ID: 0xcac
Faulting application start time: 0x01ce2bc0b48fa9b8
Faulting application path: F:\Program Files\Adobe\Adobe After Effects CS6\Support Files\AfterFX.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: 02e64db6-97b4-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: GPUSniffer.exe, version: 0.0.0.0, time stamp: 0x5059906c
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x000000000004f657
Faulting process ID: 0x8dc
Faulting application start time: 0x01ce2bc0c885d1ca
Faulting application path: F:\Program Files\Adobe\Adobe After Effects CS6\Support Files\GPUSniffer.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: 063e499a-97b4-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: AfterFX.exe, version: 11.0.2.12, time stamp: 0x505998cf
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x000000000004f657
Faulting process ID: 0xd70
Faulting application start time: 0x01ce2bc0c86b9768
Faulting application path: F:\Program Files\Adobe\Adobe After Effects CS6\Support Files\AfterFX.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: 18b30dc0-97b4-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
And here are the error messages that I am getting everytime I try to launch AE.
After Effects error: After Effects crashed previusly attempting to initialize OpenGL. Cosult the manufacturer of your graphics card for a compatiple OpenGL driver.
After Effects error: Crash in progress. Last logged message was:<2640><GPUManager><2> Sniffer Result Code: 1

After install of 8.1.5 SQLLDR.EXE wont exit after sucessful load.

Similar Messages

Maybe you are looking for