After install the new Firebox 4 I have problem with Babylon translator (english to greek) Pleasev help

When I put the censor on an English word pressing simultaneously the Ctrl and right click (as exactly I acted before installing the new edition of Firebox 4) in order to translate from English to Greek the Babylon Machine dont work
With the previous edition I had no a such a problem Please Help Thanks

Try the WhiteSmoke Translator. It is completely compatible with all text-base programs and browsers and works directly from inside our WhiteSmoke 2011 interface allowing you to edit your text in addition to just translating it! You can download a free trial here and see for yourself:
http://www.whitesmoke.com/landing_flash/writerLp4.html?d=4&a=136&r=3266

Similar Messages

  • After install of 10.9.2 have problems with rebooting

    I have had to reinstall 10.9.2 and won't dare reboot because:
    After install of 10.9.2 I reboot and got some kind of error that would not let me get to the logon screen. I'm not sure exactly where the hang up occurs but the output looks something similar to when booting with opt-S.  The only thing I remember are words "osx version not set."  The only way I could get things working again was to do a fresh install. 
    The second error occured after installing wireless mouse software that required a reboot.  This time I could get to the logon screen but my keyboard no longer worked.  In other words, there was a prompt for username and password but no keypresses were being registered.  Once again the only thing I knew of to do was to reinstall. 
    Is there anything I can do to be able to tell if there is some latent problem waiting to happen if I try and reboot? Or should I just keep the machine on all the time now?
    Thank you

    Go step by step and test.
    1. Power cycle
         Power off the router. Unplug it from the wall. Wait a while.
         Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
         It will take a   while.
         Restart the computer.
         Start up in Safe Mode
         http://support.apple.com/kb/PH11212
    2 Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    3. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
          Click "Reset".
    4. Safari > Preferences > Privacy > Cookies and all other website data:
         Press “Remove All Website Data” button
    5. Turn off Extensions if any, and launch Safari.
        Safari > Preferences > Extensions

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

  • After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?
    Even I tried to get back to Maverick but the touch pad doesn't work again. well, it works for a couple hours then start doing things but its own. it is so annoying.

    Hello josefromlaie,
    Thank you for using Apple Support Communities. 
    The following article provides some effective steps to troubleshoot trackpad issues:
    Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
    Regards,
    Jeff D. 

  • My telus email no longer works after installing the new os Yosemite

    my telus email no longer works after installing the new os Yosemite

    This is a problem between Telus and Yosemite.  Telus, of course, blames Apple. 
    Check the box that says "Allow insecure authentication"  That will get your email working.
    However, this box will get un-checked when you stop start Mac Mail.  The next time you start Mail, you'll have to re-check it for each Telus account.  (This is the bit that Apple needs to fix.) 

  • Unable to print after installing the new Quicktime upgrade

    I can not print to my Epson printer after installing the new Quicktime upgrade on my PowerBook G4 (1.67 GHz, OS X Version 10.4.11). I have re-installed the driver from Epson (several times), and have safe booted and reset my permissions but it will not print. My printer is a Epson Stylus Photo R1800. When I print, it just gives me this message... "Looking for Printer 'EPSON Stylus Photo R1800' "

    Latigna, welcome to Apple Discussions.
    Here's a similar problem on the same Epson printer. http://discussions.apple.com/message.jspa?messageID=8928421
    Also look at Troubleshooting printing issues in Mac OS X
    http://docs.info.apple.com/article.html?artnum=106714
     Cheers, Tom

  • Why has the sound gone all of a sudden after installing the new iOS 5.0.1?

    I have had the iPhone 4s since the time it was released in the uk, u had no problems with it, it's network coverage was pretty good, the loudness of the speakers was good ad the battery would last me an entire day, now after installing the new ios 5.0.1, my sous has gone, I can't hear the music playing, I can't here te clicks and the tap sounds when touching the phone, the only time it makes sound is when I make a call and I can put it on loud speaker, other than that there's no sound coming from te loud speaker, oh yeah Siri seems to be working fine. Do aby of you people know what's wrong and if any of you lot are going through the same problem or any other problems since tbe update to ios5.0.1, apple you need to get this sorted as the speaker is important to some of us if not all and it would be great if you could sort this out and any other problems caused by this update and to allow the phone to work and operate the way it should, thanks!

    Hi Guys,  I FIXED IT!!!!
    I have post eariler on this forum and as you know I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed.  But I need to happily say that I now have the fix!!!!  This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
    Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along.  I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed.  some worked for an hour but then failed.  hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ...  and in paticualar is has to do with your bottom connection.  Your phone is thinking it is docked all the time.
    To fix the no sound problem what you need is...
    1.  a torch
    2.  a tooth brush
    3.  methalated spirits
    4. a butter knife
    Step 1.
    get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed!  everything!  it might look clean but still thats ok go to step 2.
    step 2.
    Turn on your music app and put the speakers on!  If your phone is like mine it should not work.  you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
    step 3.
    Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone.  work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
    (As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
    Step 4.
    Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone.  Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again.  slide it back and forward.  Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
    This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors.  if you have been using dodgy connectors or unapproved apple cables (as I was)  any damage or hair and dirt on the terminal this is effecting it.  Try it.   just remember if you can do something external to your phone then there lies the problem.
    Hope this works for your phone as it did for mine. 
    Cheers

  • How can I get my safari to open after installing the new Mavericks operating system?

    How can I get my safari to open after installing the new Mavericks operating system?

    Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure

  • After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?

    After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?

    Silly rabbit wrote:
    Ah, you didn't read the fine print on installing Lion, did you? None of your old software will run in Lion.
    You have two choices:
    A) Buy all new or updated software
    B) Partition the hard drive and install an older version of OSX to run your older apps.
    You did not give us any idea of what PowerPC apps you were running, so additional options:
    C)  Restore to Snow Leopard
    D)  Install Snow Leopard (and Rosetta which runs PowerPC apps) in Parallels 7 in Lion:
    Installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?

    After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?

    The iPhone has a hardware problem - with the battery or something else.
    The iPhone includes a one year warranty. If purchased new in October of 2012, it remains under warranty. Call AppleCare or make an appointment at an Apple Store if there is one nearby.

  • Anyone getting the constant pop saying to sign in with itunes up on their 4s after installing the new software?

    Whenever I open an application I get this annoying pop saying to sign in with itunes up on their 4s after installing the new software?  You have to press OK to make it go away but sometimes it doesn't and I have to reboot my phon

    have you signed into your Itunes account as it is asking?
    i received the same prompts and also to my icloud account and once i signed in all prompts went away
    If you have an icloud account you can now simply back up from your Iphone4 and not use your computer anymore

  • TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • Has anyone's screen go blank and not boot up after installing the new yosemite OS

    has anyone's screen go blank and not boot up after installing the new yosemite OS

    Hi Mofimac,
    Thanks for visiting Apple Support Communities.
    If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
    Mac OS X: Gray screen appears during startup
    I recommend going through these first three sections first:
    Disconnect, test peripheral devices and network cables
    Perform a Safe Boot
    Reset the NVRAM / PRAM
    Best Regards,
    Jeremy

  • I have installed the new OS and have lost a part of my personal data: music files and pictures. The new safari is horrible. Give me back the previous version!

    I have installed the new OS and have lost a part of my personal data: music files and pictures. The new safari is horrible. Give me back the previous version! Or fix the bugs!

    These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html
    What bugs ? Have you not got your music, files, photos on your computer so that you can sync them back to the iPad ?

Maybe you are looking for

  • Problem with Windows7 and Adobe Flash freezing computer?

    Hello All, There is a problem with Windows7 and my Adobe Flash causing my computer to freeze. So, Skype, videos, etc will not work. Have tried many things to solve problem. Can Oracle VM be used to run a different operating system...such as XP or Vis

  • Infotype Data Not showing in Infoset Query

    Hi All We have a custom infotype created and now added to a query infoset. The fields appear available for query, but show no output in the results. Any ideas ?

  • DVD Menu changes when you hit menu on DVD player

    I understand how to use the connections tab, force a button or end up/menu, etc to do what I want it. what I'm having a problem with, is when a DVD is sitting on a menu, if you hit "menu" on the remote, it jumps to a random track (it doesn't do this

  • Cannot synchronise with E61i - tried all the tricks posted on web

    I just got my second Nokia E61i but when I try to synchronise it with my contacts and iCal via Bluetooth I get an error message 'Device is not available or synchronization was cancelled. Close dialogs and applications on the phone and try again". The

  • How do I unbind a local user from an Open Directory user?

    I have a couple MacBook Pros running Leopard that successfully bound a local account to a corresponding Open Directory account using Directory Utility. I had to re-install Leopard Server (using Standard configuration) and re-create Open Directory acc