After install window7 32 bit my m645 no toshiba logo when power on

hello experts
After install window7 32 bit my m645 no "toshiba" logo when power on. window open directly.
also my laptop not show full using memory(mean it is 4gb.but show 2.92 gb usable. how to
make??
[URL=http://imageshack.us/photo/my-images/826/63931688.jpg/][IMG]http://img826.imageshack.us/img826/6935/...
Attachments:
bb.jpg ‏103 KB

Satellite M645-S4070
no "toshiba" logo when power on. window open directly
The BIOS may be set for Fast Boot. Try accessing the BIOS by depressing F2 and then powering on. Disable Fast Boot there if you like.
not show full using memory(mean it is 4gb.but show 2.92 gb usable
It's not surprising that you see about 3 GB of RAM. KB929605 applies to all 32-bit versions of Windows.
-Jerry

Similar Messages

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
provide solution.

Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
Thanks for the tip,
W

After installing IOS 6 on my family's phones, when I send to text to one of them, they all get it. How do I fix this problem?

After installing IOS 6 on the three family phones, when I send a text to one of them, all of them get it. How do I fix this problems?

Go to Settings -> Messages -> Send & Receive on each device and deactivate the addresses you do not want to receive messages directed to on that device.

IMac goes to sleep/hibernate multiple times per day after installing Maverick OS. I have to shutdown and power back on.

iMac goes to sleep/hibernate multiple times per day after installing Maverick OS. Moving the mouse or hitting the spcaebar will not wake the pc.
I have to shutdown and power back on. My iMac was purchased in January 2011 and no longer in warrenty. The energy saver 'sleep' and 'display' settings are set at 10 minutes. When I changed to 'never' the machine got very hot and I changed the settings back. I have checks by: Put hard disk to sleep when possible and wake for network access. Any help would be greatly appreciated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

No sound after installing XP on my second hand toshiba satellite.

Good day to you,
I have bought a second hand Laptop ,(Toshiba Satellite Modelnr SA 30-404 PSA30E-1kVSE-6K) Windows XP home was installed and was functioning. Now I have installed Windows XP PRO Sp2 and Office 2007. The problem is that there is no sound anymore. In the device-list there are yellow Questionmarks for Multimedia-audiocontroller (Location PCI socket 0, device 31, function 5), PCI-modem(Location PCI socket 0, device 31,function 6) ,Videocontroller(Location PCI socket0 device 2 function 1) and Videocontroller(VGA-compatibel)( Location PCI socket 0, device 2 ,Function 0). I can not find the brand of the devices ,so I can not instal the drivers .The automatic search on internet did not help.
I think I have to download drivers someware ,but my laptop is not in any list(anymore ?)
What to do ?
Jean
Toshiba Satellite SA30-404
PSA30E-1KVSE-6K
Windows XP PRO sp2

Satellite A30-404 (PSA30E-1KVSE-6K)
Jean, the sound driver for that European model is here.
Realtek Sound Driver for Windows XP, 5.10.00.5210, 04/06/08
All the Toshiba drivers and utilities are here.
In case things don't work right, it's probably because the order of installation matters. I have attached the recommended order.
-Jerry
Attachments:
installation_order.txt ‏1 KB

After installing the update firefox will just not open.when i click nothing happens not even any error message,what is the problem? please help!

when i reinstall the older version it works fine,but when i update it to latest version it will stop working nothing happens when i click on it

Still the same,i downloaded from the main sit and installed it after that it will start and check add ons compatibility and then just nothing.

After installing Windows 7 i am unable to play songs.

After installing 32 bit Windows 7 everytime i play a song it becomes stuck on 0:00, i have gone through all the discussions on the website and have yet to find a solution, i really want to avoid reinstalling itunes.

To anyone who has the same problem, i ended up solving it by updating my sound devices.
After installing Windows 7 the whole computer would not produce any sound. I own a HP laptop so i just went on the HP website and updated the sound devices on my computer which for some off reason furthermore made iTunes play songs again. I dont fully understand the reasons behind this, but it works.
I hope this helps.

Re: Portege R500: Contros button doesn't work after installing update

After installing the most recent version of Toshiba's Value Added Package, the two buttons (toshiba assist and backlight on/off) do not work properly: they open instead a firefox browser window.
I assume there is something to configure in the "optimisation" section of Toshiba Assist.
When I open the program "Toshiba buttons functions" (sorry for the puny translation, in Spanish it's called: "Funciones de botones de Toshiba") all the entries are blank and I have to indicate the Url of the program supposed turning off my LCD's backlight...
I have no clue where to find this executable.
Can anybody help me?

Thanks for the response.
I hope I don't have to use such an extreme solution. Mainly because I *really* don't have time for restoring an OS. Furthermore, if I have to restore everything every time I update the computer: what is the point of updating?
There must be a more subtle solution... don't you think?

MacBook Pro 13 " going slower in performance after Installing LION OSX

Hey Guys ,
I had noticed some problems in my MacBook Pro 13" which I bought in the MID of 2011 ( i5 processor ) , I had purchased and installed LION OSX and observed after installing that my Backlite ( Keyboard ) dont get on when I start up at the LOG IN , which used to work in SNOW LEOPARD .
Booting takes SO SO SO long as when comapared with the previous OS .
Heating Problem is also a must to mention .
If you guys know how to reduce these problems please help me out !
Thank You .

I'm curious if you ever found a solution for this issue. I recently purchased the SanDisk Extreme II 480GB, replacing my OWC Extreme Pro 240GB. The OWC never experienced the "slow to wake" issue whereas the SanDisk drive does, consistently. To make sure I'm having the same symptoms, this is what happens to me: Put the mac to sleep (either manually or letting it do it on its own, waiting for the led to pulse showing that it is asleep), then wake it up (press a key on the keyboard), the logon screen shows almost immediately but as soon as I try to type the pinwheel/beach ball shows up, I wait between 20 and 30 seconds and then I'm able to type and all is well.
I contataced SanDisk and their support was horrible. They simply told me "contact MAC for this issue" (no joke, not "contact Apple" but "contact MAC", in all caps). I explained that it works fine with the OWC drive just not the SanDisk. They replied with another article showing that all macs have trouble waking from sleep (not true). I replied again indicating that I've never had this issue with any of my 3rd party drives, only this SanDisk. Then the replied simply stating that all mac's have issues with 3rd party hard drives when waking from sleep. At this point I threw a fit and yelled at my screen, even though it wasn't my screens fault.
In any case, their support has not been willing to do any actual troubleshooting. I'd love to return it and I might have to - but as you stated, it's annoying to have this issue but the performance is fine the rest of the time.
Thanks for any input you have.
Bryan

Database Studio startup Error after installing MaxDB 7.7 on MS-Windows

After installing MaxDB 7.7 the following error occurs when starting up Database Studio:
!ENTRY org.eclipse.osgi 4 0 2008-01-22 11:39:00.636
!MESSAGE An error occurred while automatically activating bundle com.sap.sdb.tools.ui.application (50). !STACK 0
org.osgi.framework.BundleException: The activator com.sap.sdb.tools.ui.application.ApplicationPlugin for bundle com.sap.sdb.tools.ui.application is invalid
Caused by: java.lang.UnsupportedClassVersionError: com/sap/sdb/tools/ui/application/ApplicationPlugin (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
... 31 more
What could be the problem here?
Any help will be appreciated greatly.
Context info:
=========
A clean install: Old MaxDB 7.6 was first uninstalled.
OS: Windows Server 2003 Standard Edition R2 on VMWare
2x Xeon 3.66 Ghz
3,75 GB memory
The install log indicates no problems other than the following:
WRN: cannot execute command: "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/1/Max6.tmp\vcredist_x86.exe" /Q:a /c:"msiexec.exe /qn /i vcredist.msi": cannot create process, The system cannot find the file specified.

Hi Simon,
The error message:
> Caused by: java.lang.UnsupportedClassVersionError: com/sap/sdb/tools/ui/application/ApplicationPlugin (Unsupported major.minor version 49.0)
usually indicates that a wrong Java Version was used to run Database Studio. Database Studio needs Java 1.5 to run.
Please check your Java installation and your JAVA_HOME environment variable to point to the Java 1.5 installation.
Cheers,
Daniel

Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down after install of new 2nd internal WD IDE 320 gig hard drive, OS 10.4.11, orig HD is WD 80, RAM = 2 gig. Help!

Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down, is now occuring after install of new 2nd internal WD IDE 320 GB hard drive, running OS 10.4.11, orig HD is WD 80 GB, RAM = 2 gig. Help!

Hi Ted,
At this point I think you should get Applejack...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
Ignore the MacKeeper ad no matter what else you decide.
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.

Portege 3110ct has no sound after installing XP Pro

I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
Please help.

Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
You bought this Portg as a second hand unit. Am I right?
So possibly the sound card is faulty.
The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
Check if you can find an XP sound driver in the internet.

IPad 2 won't connect to iTunes after installing iOS7

After installing iOS7 wirelessly, the connect to iTunes logo pops up. I'm currently just using my iPad as a web browser/e-book reader so I really have no care to what happens to any of my music and apps so I didn't back it up. Also, my current laptop doesn't have iTunes on it since my brother and I swapped laptops because I had to reinstall Lion on my Mac, so I had to donwload and install iTunes.
I tried the sleep/wake + home shut down and holding the home button after connecting to the usb and it still doesn't work. Then I tired running diagnostics, it said that it can't connect to the internet (eventhough here the ef I am) and there are no USB ports (eventhough here I am effing using my working usb wireless mouse).

Hello LaGeas,
The following article contains information and tips that can help get your iPad to work with your computer.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Beeping after installing 8GB memory

After installing 2 4GB Memory Cards, I get beeping when trying to turn the computer on.

I did try removing both cards and reinserting. Both times the cards went in smoothly and positively. I did get the clicking sound when the two side arms reset itself. However, I will try again for the third time. Maybe this will be the charm.

Start up after installing lion

Hi After installing mac osx lion on my macbook pro, when i start up i only get the grey screen and the apple logo.
I have tried safe boot, but that has not worked.
Any ideas.
Many thanks
Simon

I have the same issue... Did you solve this? I have restore to SL like 5 times using time machine.

After install window7 32 bit my m645 no toshiba logo when power on

Similar Messages

Maybe you are looking for