After install WinXP at A200-1HV hot keys above "F" buttons dont work

Hello again!
At 1-st sorry again for my bad English = ( Hot-keys near "on/off key" dont working. I talk about hot key: browser, media, play/pause, stop, next button, previous button. Are drivers need to this keys? I dont found any drivers on web-page for this keys.
I have legal Windows XP SP3 with all updates.

Of course you need software. I think those buttons are controlled by Toshiba CONTROLS utility and you can find it on Toshiba download page. I just hope you have updated BIOS to WXP version. It must be 5.20. For well working WXP you need this BIOS version.
By the way: I do not know for sure but I believe the SP3 is not supported yet and I just hope everything will work well. Other way, install WXP SP2. It should work without problems.
Good luck!

Similar Messages

Removed all changes in Java source after installing Release 2 Update 1 Hot

I happened the same problem twice after installing Release 2 Update 1 Hot Fixes:
Operations as followed:
1. Open the project
2. Modify some source code of the backing bean and then save the modifications.
3. Click the design tab to display the UI of this page and click on a button.
4. Click the property 'action' of this button in the property tab.
5. The dialog shows and I choose 'Unset property'.
6. Go back to its backing bean and guess what...
7. All the changes I made in step 1 are all gone. The source code of the backing bean goes back to the status right after I opened Creator2.
I discussed the problem with my colleagues and they have similar situations after installing Release 2 Update 1 Hot Fixes. They may do some other things in the UI Design page and when back to the backing bean, the changes to the backing bean since Creator 2 is opened are all gone and the source code of the backing bean goes back to the status right after Creator2 is opened.

This has been covered....
http://swforum.sun.com/jive/thread.jspa?threadID=105962&tstart=60
:-)

Why, after installing iTunes 11.1.4.62, do my videos no longer work?

Why, after installing iTunes 11.1.4.62, do my videos no longer work? Running Windows 7, fully updated, on a PC.

I did the whole uninstall/reinstall thing because I got the Msvr80.dll issue and got rewarded with this new problem! VERY Frustrated to say the least!

IntelMac (newest Tiger) not connecting after installing WinXP and switching

Hi Everyone. I tried searching the discussions for this, but I couldn't find a suitable answer (or anyone else having this problem). Here's the issue (and my temporary solution, but really really annoying):
I recently installed winXP on my intelMac core duo running Tiger.8. After a bit of trouble I figured out how to connect my Windows to my Airport Express (hassle). Anyway, everytime I'd switch back to Tiger, I don't connect to my network. It's a closed network, and when it starts up, Airport connects to the network (shows all 5 bars) but I cannot get online. My temporary resolution is to turn airport off then back on, and it finds (and connects) to my network so I can surf the 'net.
The question is... is there a way that I can get around this temporary solution? (It's a bit annoying as my sister who is anti-computers has to use the 'net and gets frustrated when it's not connected.)
....Yes I realize I can just tell her how to get around the issue, but >_>..... Or if there is a way I can create a script to run at startup that will turn airport off and then on, after startup, then that would be great too....
If there is someone that can help me out, that'd be greatly appreciated!
Thanks.
iMac Intel Core Duo 2.0GHz 1.5 GB RAM Mac OS X (10.4.8) WinXP installed and can connect to airport express

I just recently installed it (maybe 3-4 wks ago?).... It's BootCamp 1.1.2, assuming newest drivers for the computer.
Yes I've noticed about the date-time thing being offset by the amount of hours I'm on the XP -- almost always 5h, too, for some reason.
I read in another post that XP might be stealing my IP address which is why I have to restart the Airport card (so I can get it back). But there's no viable solution. Happen to know any for the window's side? I'll have to ask my windows buddy this too.
In the meantime....
Do you think that there are scripts out there (or is it possible to make a script) that will automatically run when the computer restarts... and have it turn the airport card on/off? ...As well as go to date and time? I'm not very familiar with Scripting, and Automator Robot is bloody confusing....
Any help is greatly appreciated!!
Thanks.
PS - Have you tried Parallels, if you switch back n forth so often? Aside from the drivers not existing, it's great for using regular applications. I tried to use it but, honestly, the games wouldn't load because of lack of drivers for video card (and lack of "finding" the video card to get a driver for it lol)

After installing os 9.1 Preview, the App store, TextEdit no longer work

after installing os 9.1 Preview, the App store, TextEdit no longer work

Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless.

After installing WMP the media buttons dont work for iTunes(back/play/for and backward)-sound control

hello, since i got my computer, i've been using iTunes.
i was happy, media keys working perfectly and all, but 1 month ago, i had to install WMP to run a diferent format that itunes dont support and after that day, my media keys stop working for itunes, first i think it war my keyboard(microsoft laser 5000) and a software conflict.
but now i buy a razer blackwidow ultimate(yesterday) and still dont working...
i spend all my weekend trying to figure out whats the problem, but i dont know.
i tried tutorials for similar problems, but noting worked...
and now the media keys arent working even on WMP
I DONT KNOW WHAT TO DO!

Hi Josh
Thanks for this useful information and for the report about your experience.
I have already noticed this Toshiba Value Added Package for Vista and have already read the More info .
This option provides details about the single drivers and tools. For Toshiba Value Added Package I found this:
"This package installs a range of important utilities.TOSHIBA Components Common Driver This module is an essential component on Windows Vista. It is required to make other TOSHIBA original programs work properly.
bye

Hot keys for the button

hi friends,
Is it possible to remove a mnemonic associated with a button based on the focus of the cursor?
For example, when focus is on text field TF1, the button B1 should have a hot key ALT_B but when the focus is on textfield TF2, the button B1 should not have the hot key ALT_B.. that is, if focus is on TF2 and user enters ALT_B.. button B1 action should not be performed.
Thanks in advance,
regards,
Deepa Raghuraman

You could use Button.setMnemonic(0) (thats the method that takes an int as the argument) to disable the mnemonic. And Button.setMnemonic(KeyEvent.VK_B) to enable it again (for the character 'b').
But don't misunderstand me either, if I open a new dialog and see a button that signifies to me : You can use ALT_B to toggle me because thats the character that has a line below it, I would be surprised it that doesn't work just a few seconds later, because some application logic took that feature away from me.
Think about it, but otherwise the above methods should work. May you have to repaint/inavlidate the button to set/remove the underlined character

Hi, after installing WinXp Service Pack 3 Firefox no longer browses. I get Server not found.

All other computers on my local network connect
and browsers work fine. Ping works on affected machine.
The network connections are all ok and the status of the internet
gateway show traffic in and out. Both windows and norton firewalls
are temporarily disabled but no effect. Any help greatly appreciated

Hi, ping works on any internet IP. Tried alternate pages, same problem.
All other machines on local network
do not have this problem. They have normal access to internet. Both firefox
and ie8 do not work on this machine. I've tried to repair the connection
through windows and IE, but same problem. From the IE diagnostic log a
message 12007 crops up that says limited or no connectivity. I'm beginning
to suspect SP3 overwrote an ethernet driver. It's an old card. But when I
tried to system restore, the message was no changes had been detected.
That was curious since my workgroup name had reverted back to the XP default.
I fixed that problem so my lan file and printer sharing all work ok.

After Installing SQL Server 2012 Service Pack the RDL reports do not work

I installed SQL Server 2012 Service Pack on backEnd sharepoint and also on BI Server that host Reporting Service.(Before installation everything was working properly)
After this installation the RDL reports do not open and I receive this error message.
The permissions granted to user 'domain\username' are insufficient for performing this operation. (rsAccessDenied)
I also receive the same error message on changing DataSource, Parameters and subscription.
I should mention that, I am using Reporting Services in the Integration Mode. I want to open and modify RDL reports from SharePoint and inside the SharePoint Document Library.

Hi Hedayat,
Thanks for posting your issue,
To solve this problem you have to grant your SQL Reporting Service Application Pool
Account (whatever is running your SQL Service Application, see Central Admin -> Manage Service Application -> SQL Server Reporting Services)
Full Control to the web application that report is being deployed to in your particular case.
Or you could just use the powershell command below:
$webApp = Get-SPWebApplication –Identity http://yoursharepointapp
$webApp.GrantAccessToProcessIdentity(“domain\SSRSAccount”)
Also, check out below mentioned URLs for more details and fixes of this issue
http://paulliebrand.com/2013/09/25/ssrs-and-permissions-granted-to-user-are-insufficient-for-performing-this-operation/
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4ea477ec-ea12-4a3e-bc33-2fcf9d52b84e/error-rsaccessdenied-nt-authoritynetwork-service-are-insufficient?forum=sqlreportingservices
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

After installing new operating system windows 7 on imac 27, mac stopped working.

We bought new imac 27, late 2012. Installed windows 7, mac stopped working. We restarted mac os, but system cant see hard disk. Cant install mac. What to do?

How did you install Windows 7? Via Boot Camp, using a Windows 7 system builder disk, or with Parallels or VMWare's Fusion?
If you installed using Boot Camp, it sounds as if you goofed and installed Windows onto the Mac partition instead of the Windows partition. What happens when you hold down the Option key when you restart the Mac? Do you see a Mac partition and a Windows partition?
I would suggest seeing if you can use the Recovery mode on your new iMac to reinstall your iMac's operating system if you installed Windows over it by mistake. Please see this Apple Support document on how to accomplish this:
http://support.apple.com/kb/PH11273?viewlocale=en_US&locale=en_US
If you installed Windows using Parallels or Fusion, I can't help you, as I've zero experience with either.

After installing Lion on my Mac Pro, search in mail is not working.

I can run the search successfully in spotlight, or on my macbook air, but when searching in mail on the mac pro, it seems to return random results. Can anyone shed some light?
I have tried multiple test cases and the mac Pro from withi

I ran into the same problem with only some messages (if any at all) showing up in the searches in Mail. For an example, I have over 100 messages from Netflix within all my mail folders (trash included) but when I search for anything containing "netflix" it would only pull up 2 messages from my trash folder on two random dates. This was the case for ANY searches I was trying to pull up, not just for netflix emails.
I spoke to an iOS Senior Advisor who did a screen share with me (because he had never heard of the problem previously) and after reviewing the issue, he said he will be taking this up to the engineers.
Here is what fixed the problem for me:
1. Enable Indexing
Open Terminal, and type the following: sudo mdutil -i on /
If it asks for your password, type it in and hit return.
Re-open mail. If this didn't fix anything, then you will need to re-index:
2. Re-indexing HD
Go to System Preferences, Spotlight, click on the Privacy tab, click on the + to add the entire Macintosh HD to the list of "Prevent spotlight from searching these locations" and then remove the Macintosh HD by clicking the - button.
Once you've done this is will automatically start re-indexing in spotlight. This took about 90 minutes on my computer, but once it was done, I re-opened mail and it was working properly again.
If you still run into issues, I've heard that in Mail, clicking on "Mailbox" then "Rebuild" can sometimes fix the issue. Let me know if any of those steps worked for you!

After installing 12.1 on Win7 64 bit video no longer will work.

I have never had trouble downloading and playing ITunes video movies, tv shows, etc. on this computer until updating to 12.1. Now ITunes gives a message that video is not supported on this computer. Have uninstalled and reinstalled about 4 times and problem remains. Can you help?

You're seeing this pop-up. This occurs if you have installed the new all 64-bit version of Windows but, presumably, your graphics support is still based on 32-bit drivers.
Clicking the More Info button will take you to iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the iTunes6464setup file.
See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links to the three alternative iTunes for Windows installers.
tt2

After installing iOS 5 beta 7 on iPad 2 / Home Button is not working properly :(

Hey guys,
my paddy is brandnew. Just 4 Days old.
I got it with iOS 4.3.5 on it. Everything was fine.
We`re developing for iOS, so therefore i installed iOS 5 beta.
Since i did that, i have Problems with the Homebutton.
Sometimes it reacts sometimes not at all.
Someone told me, "no support for beta"
I just want to know, if this could be a Software issue or if it is a real Hardware problem.
I heared that this problem appeared in a version of 4.xx as well.

There have been a very small number of users that have reported problems with the home button using iOS 4.xx. From what I have seen, closing apps seems to help in many cases.
No matter what you find on this site, you would be better off seeking help here.
https://devforums.apple.com/index.jspa

After installing new version, I don't have the firefox button feature.

I don't have the orange firefox button to allow me to see all of my menu options. I am running XP.

Usually you have either the orange Firefox button or the classic menu bar, but not both at the same time.
You should be able to switch back and forth this way:
If the classic menu bar is not displayed, tap the Alt key to display it and then use
View > Toolbars > Menu Bar
to make it persistent. It should replace the orange Firefox button. To switch back, uncheck
View > Toolbars > Menu Bar
Does that work??
Also, the Mozilla ActiveX plugin is defunct and should be uninstalled ASAP. It isn't reliable above Firefox 1.5, and may have unpatched security problems. [http://kb.mozillazine.org/ActiveX#Uninstalling_the_ActiveX_plugin_on_Windows How to uninstall].

The volume buttons dont work after installing mountain lion

Yesterday I installed Mountain lion. Now the volume buttons don´t work. When I press them the volume don´t change. I tried to change in the system settings, but all selections there can be made.

By menu bar you mean the sound at the top of the screen?
That doesn´t work either, it´s locked.

After install WinXP at A200-1HV hot keys above "F" buttons dont work

Similar Messages

Maybe you are looking for