After installation for ECC60 IDES

hi,
now i installed ECC6.0 IDES with temporary license successfully. but when i called T-code ME23N, i got some errors "Field selection ME21N not defined", something like that, in addition,
when i called F-43, i could not see some values on company code input search help,  no anydata..
something was wrong.
i thought that i need to download support pack, but i can only see ABAP SP06 on myERP2005 on service.sap.com.
in case of following SAP_APPL SP 02, do i need to apply for the latest SAP_APPL SP?, if so, where can i find this?
i could not find them via service.sap.com
thanks
venjamin
ECC6.0 SP info is below;
SAP_ABA     700     0005     SAPKA70005     Cross-Application Component
SAP_BASIS     700     0005     SAPKB70005     SAP Basis Component
ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0005     SAPKIPYJ75     PI_BASIS 2005_1_700
SAP_BW     700     0005     SAPKW70005     SAP NetWeaver BI 7.0
SAP_AP     700     0002     SAPKNA7002     SAP Application Platform
LCAPPS     2005_700     0001     SAPKIBHD01     LC Applications (LCAPPS) 2005_700
SAP_APPL     600     0002     SAPKH60002     Logistics and Accounting
Message was edited by: venjamin

Hello,
Plz. check the following site for the same..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/6f/38373b482a8548e10000000a11402f/frameset.htm
Dont forget to give reward points..
Thanks

Similar Messages

  • Don t have any data!!!!!!! After installation 4.7 ides

    Good Night my friend s!
    After installation 4.7 ides is sucessfull I have gone to se11 to verify some tables like MARA , VBAK ... but I not found data in all tables(many tables ). Don t have any data in the tables!!!!!!!
    The directory oracle is full aproximately 50 gb full ... well there is many data .
    How I resolve this problem ?
    How can I generate data for this ?
    Is it some program in se38 ?
    My Login is DDIC and Client 000
    thanks friends
    Edited by: Surfing on Feb 27, 2009 10:06 PM

    hi,
    you can logon to client 800 using this user and password :
    user : sap*
    password : 06071992
    user : ddic
    password : 19920706
    This two are default user and password.
    ardhian
    http://ardhian.kioslinux.com
    http://sapbasis.wordpress.com

  • Password creation after installation for root sign in

    When I installed Solaris, I opted out of assigning a password during configuration, and now I cannot login to Solaris Managment Console. How do I creat a post-install password?

    Hello Jim,
    use <b>passwd</b> at the shell.
    Michael

  • Has the ODI same installable for both Client & Server?

    Has the ODI same installable for both Client & Server?
    i.e. Team with multiple developers is concurrently working on ODI project. Repository is very much same. They just need the Designer Module in their desktop.
    Is there separate installable for development IDE for ODI (Designer Module) instead of complete ODI which may include the server also?
    Thanks In Advance
    priyadarshi.

    Hi ,
    You can install only the client in multiple machine if multiple user are going use/share the same repository ... and you should be having the same
    snps_login_work.xml
    snps_login_security.xml
    in all your client installations....so that you can have multiple users created and share the same repositroy ...
    hope this helps
    Thanks
    Ananda

  • Acarbat Freezed after installation and run it for Mac Pro!

    Dear all,
    I tried to install Acrobat 9 Pro to one station this morning (or install
    Adobe Reader 9 couple days ago), but the system hanged after installation
    and ran it. Clicking "force quit", it showed that "Acrobat (no response)".
    Following are the general description about the workstation and it is
    connected to Mac server.
    Workstation which tried to install Acrobat 9 Pro:
    - Mac Pro Processor: 2* 3GHz Dual-core Intel Xeon
    - Memory: 4GHz
    - Mac OS X 10.5.6
    Server
    - Mac Pro Processor: Dual 2 GHz Power PC G5
    - Memory: 3GHz
    - Mac OS X Server 10.5.6
    - Service: AFP, FTP, Open Directory (control the use login for all
    workstations)
    Installation procedures:
    - Login the workstation as an Administrator (local)
    - Install Acrobat 9 PRO
    - Registration
    - Shut down the workstation after installation
    - Restart the workstation
    - Use my unique name to login (all my files are stored in Server)
    Problem:
    - Double-click "Acrobat 9 Pro" to run the software, it hangs
    or
    - Click one PDF file and use "Open with" to select "Acrobat 9 Pro", it
    hangs again.
    Does anyone have the same situation or have any idea to solve this
    problem?
    I really appreciate your kind help.
    Best,
    Ei-Wen

    Home>Library>Preferences>com.apple.SoftwareUpdate.plist.  Trash this file, repair permissions and restart your computer.  Empty the trash when done.
    P.S.  If you shut down your computer, the window should have disappeared.  Why didn't you use Force Quit?

  • We have Noticed after our R12.1.1 and upgrade to 12.1.3 Federal is showing up and we did not select it on the installation choices any ideas?

    We have Noticed after our R12.1.1 and upgrade to 12.1.3 Federal is showing up and we did not select it on the installation choices any ideas?

    We have a GOLD instance with patches and no data. Can We safely ignore the FV module?
    You can but you will need to consider additional steps for this module -- Please see "Even if the customer has no longer purchased a license to use the product .." line in the doc referenced in my previous reply.
    How would or Why would it be showing up as installed?
    It must have been selected when the installation was done.
    Thanks,
    Hussein

  • HT201371 More Apple id's with the same Touch ID possible? I have two Apple ID's, one for buying apps since the first iPhone and later, one for iCloud. Now with my new iPhone 5s, after installation Touch ID is connected to the iCloud one.

    I have 2 Apple ID"s, one for buying app's (since the first iPhone) in the store and another one for operating with iCloud things. Now, after installation/activation of my new iPhone 5s, the Touch ID is connected to the iCloud world. Conclusion, if I like to buy a new app. I still have to fill in the password for the other Apple ID. In the past I asked Apple to may join both, but that seems to be impossible.
    Anyone a solution?

    I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

  • Font Problem in Mail after installation of Office 2008 for Mac

    Since I installed my 2008 Office for Mac I have had occasional problems with the font display in IMail. Sometimes the fonts are just gibberish but will become readable again if/when I change the font sizing. Any suggestions? When I installed Office 2008 I had previously deleted the Trial Version of Office for Mac 2004 and the installer for Office 2008 did not find any prior Office installation.
    Thanks

    Download Font Nuke. Close all other applications you may have running.
    Run Font Nuke and click on the "Nuke Font Caches" button at the upper left. The panel will fill with other choices. At the lower right, first click "Update Caches List". It will search your hard drive for font cache files and list them. The purpose being simply so you can see what is about to be removed. Click the "Nuke Font Caches" button at the bottom right. Your Mac will restart. Don't attempt to stop the restart. You should always restart immediately after removing any cache files.

  • Keep directory structure for extra files after installation

    I'm working on an AIR project in Flash CS5 that has some additional support files in a folder called "data".  In my publish setting, I included this folder.  When I run a test install of the AIR file, I no longer have a "data" folder in my installation directory.  How can I have the installer create this folder so I can access the support files?
    BTW, I'm on a Mac and only see the .app file after installation.  The support files will hold application preferences that need to be read and written to.

    Unfortunately, I am not able to reproduce the prodblem. To reproduce I added a folder called testFiles in the AIR Settings Window(In Included Files Section) shown below. And I got the same in Program Files when i installed the app.
    Am i doing anything different than you? BTW I am testing on Windows for now.

  • After Installing - Cannot Complete Installs for Programs

    I installed Snow Leopard and it seemed to be running fine after I granted myself Admin access again.
    However, I tried running the installs for multiple programs including a security update to the OS, iLife and iWork - the installs get to "Preparing Installation" and freeze.
    I have tried leaving some of these installs up for up to 48 hours and there is no progress.
    Yahoo Messenger also freezes on sign in with a similar problem.
    How do I fix this so that I may use Yahoo Messenger and run installs again?

    I suggest you might try this:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If this doesn't help any, then reinstall SL.
    To upgrade iLife and iWork you will have to purchase the '09 versions. There is no free upgrade path from '08 versions.

  • I downloaded upgrade for LR. After installation, ALL my pictures were gone!!!!! What the hell??? HELP, please.

    I downloaded upgrade for LR 5 on my MAC. After installation, I opened LR and all my pictures were gone??? What has happened?  Thanks.

    If problem not due to opening wrong catalog, then there is likely some other simple explanation, like you are looking in the wrong place or have a filter set wrong or something.
    If you don't figure it out soon, consider posting back with more details and maybe a screenshot or two..
    ~R.

  • Problems after installation 16.0.3 update for Windows

    I propose here to report problems appeared after installation 16.0.3 Illustrator update for Windows.
    As for me:
    Don’t display Stray and Center Points in Outline mode;
    Eyedropper+Shift works incorrectly;
    Graphic Style Libraries -> Additive make disappeared Fill.

    Hi K,
    Thank you for you reply and sorry if the information was a bit too truncated. well here goes.
    I am using a MacBook Pro (3.1) 17 inch, 2.4GHz processor, 2 GB ram. I edit video using Final Cut Studio 2. i am having a problem with Final Cut Pro 6 after downloading the latest update (6.0.3). Before I downloaded the update I used to be able to export my movies on the Quicktime option of FCP (not compressor or Quicktime conversion) giving me the option to view the the movie while in an FCP Project. The viewer used to scale the exported video to 16.9 (720 by 576 anamorphic), it no longer does this, instead playing it in 4.3. I have tried exporting both from the time line and the canvas but the viewer will only preview in 4.3. As I want to see it in 16.9 because that is what the movie was made in, captured and edited in. The original settings have not changed but there seems to be this annoying problem.
    I hope that is enough detail
    Ivan

  • My IPhone 5 is blocked after asking for update IOS 7.0.2 any idea To unblock it please

    My iPhone 5 is blocked after asking for update IOS 7.0.2 it shows on the screen iTunes with an arrow. Any idea To unblock it please?

    I have a similair problem.  My Iphone 5 has been doing a recovery for approximately 6 to 7 hours.  Should I expect it to take this long or should I restart the process?  Itunes does say it is doing a recovery and looks active but I question the length of time that this is taking.
    Thank You in Advance...

  • Change the license key for BOXI3.1 after installation

    Are there problems if i change the license key for BOXI3.1 after installation?
    (Not performing a upgrade from trial version)
    Or do i have to do a re-installation instead?

    Hi,
    Sure you can change the license key, without re-doing a complete install of BO XI. Just go to CMC->Lisence Keys, and add your new product key.
    Then you 'll see bellow, the new information about u key (CPU/Date limitation).
    Regards
    Olivier

  • I was charging my iPod and after charging for about 30 minutes I unplugged it. But now all it says is OK to disconnect. I have no idea what to do.

    I was charging my iPod and after charging for about 30 minutes I unplugged it. But now all it says is OK to disconnect. I have no idea what to do.

    This is the ipod touch forum.
    Try posting in the ipod nano forum.

Maybe you are looking for