After installation third Operation System my Imac(27) heating quikly and better.
Good Afternoon. After installation third Operation System my Imac(27) heating quikly and better.
I had MacOs and Win7 32bit(installed in Shop). It was ok.
But 32 bit OS didnt work with 8Gb RAM. Therethore i installed Win7 64 bit.
Now i Have MacOs, Win7 32bit, Win7 64 bit.
Before installation WIn7 64bit, in Win7 32bit my Imac was working in common mode(Internet\Video) without propeller noise. But now, i have noise after 10-15 minutes Video or Browser using.
In Win7 64bit i had more propeller noise and after 10-15 minutes play computer game, i have lags and troubles with performance!! My propeller's are spinning with maximal velocity(after 10-15 minutes). Therethore i cant play games\watch Video in my Win7 64 bit. I think that i must be install someone drivers?? I have BootCamp 4.0 under my Win7 64 bit.
In Win7 32 bit, i dont have problems with perfomance, but noise is really stronger than was early.
Please, Help me!
Sorry for my bad English.
Text for Russian employee:
Я купил Imac 27 с установленный МакОс и Win7 32bit. Всё было хорошо, но под 32 бита не работает 8гб Озу.
Поэтому я установил 64битку, но под ней сильно начинают крутится кулеры и вентиляторы. Примерно через 15 минут они крутятся на максимальной скорости!! Попробовал поиграть в игры, через 15-20 минут производительность начинает падать и начинаются "подвисания". Т.е. поиграть не реально. Да и при обычном сёрфинге страниц нагрев происходит быстро и кулеры начинают крутится быстрее.
Под 32 бита производительность не падает(мной замечено не было), но нагрев происходит быстрее и кулеры начинают крутится тоже быстрее. Даже при обычном сёрфинге уже начинается шум.
Не знаю по поводу нагрева, может он и в пределах нормы, но шума до установки новой винды было меньше!
Помогите разобраться с проблемой. Я не хочу потерю производительности под Win7 64бита и хочу уменьшить шум/нагрев под обеими Окнами.
Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd
Similar Messages
-
I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??
Yes, it's possible, but if your Windows system is on a Boot Camp partition then you have to first remove it. Then create however many partitions you want for the operating systems. You have OS X on one, so you need two more - one for Windows and one for Linux. You then install Windows and Linux separately to their respective partitions. Download rEFIt
Use it as the replacement bootloader so you can properly boot from each OS properly. -
My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possibleMy itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible -
After reinstalling operating system Windows 7, I lost apps and can no longer sync with Outlook 2010?
After reinstalling operating system Windows 7, I lost apps and can no longer sync with Outlook 2010?
apps are stored in
C:\Users\<your account name>\Music\iTunes\Mobile Applications
their extensions are .Ipa you can try doing a search on your harddisk
unless you formattet it when you reinstalled
but an app can only ever be bought 1 times on an appleID so if you try to buy them again it will give you a free download of the app and not charge you
about sync then if you connect the ipad and click info tab and set it to sync your outlook data it should sync without any problems -
After installing new operating system, Mac started to open Word when I turn on the Mac and a question about face time always appear when turn on the mac. What should I do?
Look in system preferences>users and groups>log in items.
Barry -
I do not know what I should phone is locked after changing the operating system
I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?
It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it. -
How do I copy my operating system to a solid state drive and make it the disk I boot from?
How do I copy my operating system to a solid state drive and make it the disc I boot from?
Where is your operating system now? Basically, you clone it from wherever it is now to the SSD:
Clone Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Select Disk Utility from the main menu then press the Continue button.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the SSD. Source means the drive now holding OS X. -
I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly. Please help.
Remove preferences on Mac OS
Quit Dreamweaver.
In the Finder, navigate to /Users/Your User Name/Library/Application Support/Adobe.
Rename the Dreamweaver preferences folder:
Dreamweaver CS5: Rename the Dreamweaver CS5 folder to, for example, Old Dreamweaver CS5.
Navigate to /Users/Your User Name/Library/Preferences.
Rename the Dreamweaver preferences file:
Dreamweaver CS5: Rename the Adobe Dreamweaver CS5 Prefs file to, for example, Old Adobe Dreamweaver CS5 Prefs.
Try to re-create problem
After you have removed your existing preferences, restart Dreamweaver. The application creates new preferences files, folders, and registry entries, as applicable, using the default settings.
Then try to re-create the problem that you had before.
If the problem was resolved, then damaged preferences was the cause.
If the problem persists, then the preferences are not the cause and you can replace the original preferences.
To replace the original preferences:
Quit dreamweaver.
Delete the new preferences folder and restore the original name of the previous folder. -
updated my iphone 4 today to new operating system...said error 50 and i lost all my previous data...there is no back up to get my contacts and photos back although it did say it was backing up first before it installed the new operating system but i cant find it anywhere...so frustrated at losing everything
http://support.apple.com/kb/TS3694#error50
-
My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?
Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window. -
Trying to add our Epson 4800 after update 10.8.3 our iMac is shutting down and so is our Mac Book Pro. Any advise??
Thank you Linc. We just half solved our problem. The update 10.8.3 has a bug for using our printer with a special kodak proback firewire cable by don't giving a support. So we skipped the old way by downloading a new driver,
using an USB cable and adding our printer again and it works. The reactions of collegues and those on the Apple site showed us that the update 10.8.3 is having a major problem. -
My Mac operating system is OSX 10.4.11 and I "replaced" my older version of Firefox with a newer one that does not open with my system. Can you send me an older version of Firefox? Thanks!
You can get Firefox 3.6.20 from here. <br />
http://www.mozilla.com/en-US/firefox/all-older.html -
I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?
Hi spiritentrep,
What Adobe software are you referring to? Are you using Acrobat? You should have no problems running Acrobat XI on Yosemite, and as along as you have compatible scanner drivers for your Epson, you should be fine there as well.
Best,
Sara -
I purchased Premiere Elements 13 & Elements does not support Windows Vista which is our operating system. I have Elements 12 and never had this problem. What are my options? Do you have a compatible program for WinVista similar to Premiere Element?
deniseu
This is not Adobe. Please do not duplicate threads. I have answered one of at least 3 of your threads currently appearing at the top of the list of threads in the Adobe Premiere Elements Forum tonight. Please see
I purchased Premiere Elements 13 and it is not compatible to Win Vista which is my operating system. What are my options?
New to Premiere Elements 13....it does not support Windows XP, Windows Vista, and OSX 10.7.
Also see
Removed features and unsupported file formats | Adobe Premiere Elements 13
In your other thread which I have cited above, I have posted a list of choices ahead of you. There is no workaround to get Premiere Elements 13 to support Vista, XP, or OSX 10.7 that has ever surfaced.
ATR -
Whenever i try to manually sync my iPhone with a new playlist on iTunes (on my laptop), it always gets stuck in step 7, Waiting for changes to be applied, and then nothing happens. I'm running the latest operating systems on both my iPhone 5 and macbook
I really don't appreciate the fact that no one from Apple seems to be dealing with the many, many threads that have started on this topic since iOS 7 came out. In any event, I seem to have solved my problem with a full software restoration -- that is, iOS software restoration.
I clicked on "Restore iPhone..." which does a complete reinstall of the iOS but also all apps, photos, songs, etc. Took about 45 minutes, but seems to have worked.
I had previously tried reverting to a backup of my iPhone, but that did not solve the problem. Only a full restore solved it.
Maybe you are looking for
-
How can I use Back to my Mac when my ISP blocks port 1900?
I was just forced to switch ISPs (don't ask...) and it turns out that my new ISP (Astound) lied to me and actually does block port 1900, which means that Back to my Mac (on which I rely) does not work. Has anyone seen this and found a viable workarou
-
Office 2013 will not open any applications
I am having a problem with a number of users complaining that Office 2013 applications will not open. I double click on the icon, or single click on the tile (Windows 8.1) nothing happens. Looking at the task manager the only thing related to the off
-
Issues re-installing adobe premiere pro cs5.5 Family
Hello All, I Hope you guys can help me out on this, not sure this is the correct topic. I've been working with Adobe Premiere Pro CS 5.5 For a while now, allways ran perfect on my machine: Computer Specs IBM Lenovo Thinkpad T420 Core I5 8 Gigabyte RA
-
I have purchased some rubbies from the app game call paradise cove, and never rcvd them. I did it 5 times because each time I purchased them it went back to the home page of my phone....When I went back into the app game the rubbies were not there.
-
My website works in IE but not firefox
this is my web page: http://www.andrew-leonard.co.uk/Mallorca/mallorca%20ferns.htm It usess css to define layers and javascript to show and hide the layers. It uses a dhtml menu system by Milonic to execute the javascript This is part of the code for