After installed Home Hub 5 my wireless speed drop ...

Hi there.....
I wonder if anyone can help me with this. I got my Home Hub 5 today to replaced my Home hub 3. Once I installed the home hub 5 all my wireless device has dropped to 10mb!
I don"t know what else can I do coz I tried resetting the home hub 5 and change all the setting on the home hub 5 but still only give me 10mb!
Can anyone please help
Kit Kat
Solved!
Go to Solution.

Hi there.............
I have solved the problem why the speed has dropped down to 10 mb on wireless device!
For anyone in the future that upgrade to the home Hub 5 I will like to mention the reason so they know what to do:
Once you installed the home hub 5 , turn it on and add wireless device to it . When you open the browser on your wireless device Bt home hub will pop up the ' parental guide ' page for you to set up . You can set it up or click do not want it then it's will go back to the main web page !
Because some of us who use apple device such as iphone don't use the browers and use the apps so didn't know that .
So once you went through the parental guide page your bt speed on your device will went back to full speed !! All my wireless device went back to normal around 50 mb !!
I hope the above statement will help who ever going to upgrade to home hub 5 soon and will notice why the speed drop so much and what is the reason for it and don't need to mess around with your home hub channel coz just the simple parental guide set up page need to finish the setting !'
Kit kat

Similar Messages

  • After installing mountain Lion my wireless mouse stopped working

    After installing mountain Lion my wireless mouse stopped working my wireless keyboard still works so I can get to the Bluetooth menu via search but once I'm there I can not figure out how to scroll down and select the mouse that is still listed as a linked device. I have already tried restarting the computer and changing the batteries. Called apple thinking they would help since I just bought mountain Lion but silly me apple does not give anything away for free. I was I never payed $20 for this p.o.s So-called operating system

    You can bypass GateKeeper.

  • WRT54G2 v1-Wireless speed drops after a few hours/days, changing channel fixes it

    Hi.
    I have a WRT54G2 version 1 with the latest firmware from June 2009.
    I have found that it performs very well (10-11mb wireless speeds) for a while (a few hours or sometimes a few days) but then the wireless performance drops below 1mb. Wired performance is not impacted. 
    It seems that I can immediately solve the issue by changing to another channel. The speed jumps right back up. However the same problem happens again eventually and again changing the channel fixes it (and even changing it back to the channel I had originally will fix it). 
    Any thoughts? I've never had a router do this and it's quite annoying.
    Thanks

    Nope this didn't fix it within minutes the same issue popped up. Note that this doesn't occur with another wireless router I own (I swapped it out just to test). I'd just not even bother with the WRT but my Vonage box doesn't work with my other router so I need to use this one. Any other ideas?
    (Mod Note: Edited for guideline compliance.)

  • Issues with Home Hub 3 Wireless. And lousy teleph...

    I don't know if this forum is moderated or followed by BT support staff, but I sure hope so.
    After coming from Virgn Media for my BB to BT infinity (Awesome speeds btw!) I'm pleased with the connection and, up until today, the support. I now have issues with my Wireless devices on the HH3.
    This is the outline of my setup:
    I have the Open reach modem connected to the home hub.  I then have the 1Gbps ethernet port from the home hub that is connected to a 1Gbps 5 Port switch that connects my wired network together (Consisting of my Xbox, Networked Printer and my Desktop PC).  Wireless serves 2 Laptops, an Xperia U phone, and a G5 Ipod touch (not all mine, I have a flat mate).
    My issue is that when more than one device connects via WiFi, the WiFi network has serious issues: The connections don't drop per se, but websites are not delivered, data transfer is intermittant at best - i.e. the WiFi network simply does not work.  When there is only one device, there is no issue.
    Now, being a techie (I don't mean to title drop, but I think it's important that technical support know that I know my stuff) I'm an electrical engineer (The graduate type) and I know my IT - so I have my own idea of what's wrong with this.
    Now, as my order was not completed until yesterday, techincal support couldn't/wouldn't help until today.  Yesterday, however, I spent hours trying to solve my issues and got as far semi-solving the problem.  I managed to get everything working nicely together when Wireless N is disabled and only a/b/g is enabled.  Great, but a main selling point is the Wireless N and I want to use this.
    So, today I phoned technical support.  I should also note here, and I made this perfectly clear with support, that when the WiFi starts to missbehave, the wired network still works perfectly and I have no issues with internet connectivity with any wired devices.  So, clearly this is not a line fault - it's on this side, aka, the router WiFi side where the problem resides.  Support decided to do a line test anyway - and of course it got the all clear.  He then asked me to reset the router (Yey, again after I had done it plenty of times before, only this time I had customised the SSID and the LAN IP addresses and now they need done again).  He then went on to state that I should receive an e-mail with instructions on what to do next, and if they are still issues to reply to a text message that will be sent.
    Duly, an email arrived.  It began with "Sorry you had to call us today about your wireless disconnecting. We’re pleased we could help you get it working again." and continued on with with this theme.  No, my problem is not resolved!  I phoned back, this time advising me to change channels, and check individual devices to see if they're any conflicts - I did this pretty quickly and disabled and re-enabled WiFi on my Laptop, phone, ipod and still to no avail.
    I have now been told that I will get a phone call between 3 and 3:30pm to see if the WiFi will settle down. huh!
    I don't mean to be such a pain and sound like such a git, but this is not an issue that I believe the technical support (via the call centre anyway) will be able to solve.  This is an issue with the HH3, mine at least, not being able to handle mutiple WiFi devices conntected simualtaneously - all but one on N, the other on G.  Now, I'm of the understanding that this shouldn't be a problem.  I'm sick of telephone support going through their script without listening to the whole issue either or beleiving that I spent a good 2 hours yesterday getting to the bottom of this.  I don't need line tests, I don't need resetting the router, I don't need changing channels - I've did all this!
    So it looks as though I'm stuck on HH3 in 'G' for now until we solve this issue.
    Further information: I'm using the type A HH3; again wired devices are not impacted in any way from this issue; I have tried multiple different channels; YES! I've reset the router and power cycled it; And this issue happens wether my WiFi devices are 1 meter away from the HH3 or 15 meters away.
    Could this be a bad HH3 or frimware issue? Can someone suggest something or highlight something that I've perhaps overlooked or missed?

    This is only a customer to custome help forum.
    This link may help, although some of the things you may have already tried.
    Wireless can prove quite unreliable, and an separate wireless access point can help.
    Wireless connection problems
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • 5ghz Wireless Speed Drops Occasionally

    Hi,
    I currently have BT Infinity 2 with an average of 74mb download speed, however after a few days the 5Ghz wi-fi speed drops to around 25mb (speed still at 74mb via ethernet cable) and after restarting the Home Hub 5, the 5Ghz wi-fi speed goes back to 74mb for a few days then it drops again and I have to restart the router again.
    Is this normal or could it be wifi interference as there are lots of wifi spots around the building. It does not affect the 2.4Ghz band and a download speed of 74mb is only possible when connected using a 5Ghz band.
    Thank you.
    Ad1981

    I would try changing the wireless channel:
    http://bt.custhelp.com/app/answers/detail/a_id/14094/~/how-do-i-change-the-wireless-channel-on-my-bt...
    Hope this helps
    If my post has been useful, please click on the Ratings star on the left-hand side of the post.

  • Wireless speed dropping to 5.5Mbps

    Hi Folks,
    I like the ArchLinux distribution and have enjoyed it for a few years now.
    But recently I noticed my wifi speed dropping like crazy, I reinstalled my router (DD-WRT) but that didn't fix anything.
    So I tried something else, I booted to Windows and I found that I had normal speeds (54Mbps) during the span of an hour.
    Afterwards I rebooted back to linux, and the speed immediately dropped to 5.5Mbps
    This started about 1 or 2 weeks back, I'm guessing after some pacman update..
    Are there any regression or new bugs known which affect my performance?
    lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
    02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 02)
    10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    18:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
    lsmod | grep iw :
    iwl3945 66405 0
    iwl_legacy 45666 1 iwl3945
    mac80211 189758 2 iwl3945,iwl_legacy
    cfg80211 126962 3 iwl3945,iwl_legacy,mac80211
    lsmod:
    Module Size Used by
    cryptd 6901 0
    aes_i586 6948 1
    aes_generic 25678 1 aes_i586
    coretemp 4374 0
    btusb 9897 0
    bluetooth 115465 1 btusb
    arc4 1094 2
    ecb 1645 2
    iwl3945 66405 0
    i915 557262 3
    snd_hda_codec_analog 62068 1
    iwl_legacy 45666 1 iwl3945
    snd_hda_intel 19261 3
    snd_hda_codec 66793 2 snd_hda_codec_analog,snd_hda_intel
    mac80211 189758 2 iwl3945,iwl_legacy
    drm_kms_helper 24245 1 i915
    snd_hwdep 4919 1 snd_hda_codec
    pcmcia 31566 0
    drm 147653 4 i915,drm_kms_helper
    snd_pcm 60311 2 snd_hda_intel,snd_hda_codec
    joydev 7535 0
    tpm_infineon 6770 0
    cfg80211 126962 3 iwl3945,iwl_legacy,mac80211
    psmouse 55927 0
    sg 21022 0
    uhci_hcd 19344 0
    intel_agp 8664 1 i915
    ehci_hcd 34847 0
    ppdev 4822 0
    firewire_ohci 25683 0
    snd_timer 15542 1 snd_pcm
    tg3 113936 0
    i2c_algo_bit 4431 1 i915
    parport_pc 27902 0
    firewire_core 43390 1 firewire_ohci
    iTCO_wdt 10333 0
    snd 43527 12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    intel_gtt 11417 3 i915,intel_agp
    usbcore 119004 4 btusb,uhci_hcd,ehci_hcd
    parport 26107 2 ppdev,parport_pc
    agpgart 22160 3 drm,intel_agp,intel_gtt
    yenta_socket 18846 0
    soundcore 5018 1 snd
    snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
    crc_itu_t 1077 1 firewire_core
    evdev 7310 13
    i2c_core 16665 4 i915,drm_kms_helper,drm,i2c_algo_bit
    pcmcia_rsrc 8816 1 yenta_socket
    iTCO_vendor_support 1553 1 iTCO_wdt
    pcmcia_core 10154 3 pcmcia,yenta_socket,pcmcia_rsrc
    libphy 14053 1 tg3
    hp_accel 12892 0
    lis3lv02d 8712 1 hp_accel
    serio_raw 3430 0
    pcspkr 1415 0
    thermal 6603 0
    hp_wmi 6602 0
    container 1937 0
    input_polldev 2446 1 lis3lv02d
    sparse_keymap 2636 1 hp_wmi
    fan 1910 0
    rfkill 12510 3 bluetooth,cfg80211,hp_wmi
    tpm_tis 6389 0
    tpm 10037 2 tpm_infineon,tpm_tis
    tpm_bios 4237 1 tpm
    video 9852 1 i915
    wmi 7367 1 hp_wmi
    battery 8905 0
    ac 2545 0
    button 3654 1 i915
    cpufreq_powersave 714 0
    cpufreq_conservative 4325 2
    cpufreq_ondemand 5064 0
    acpi_cpufreq 5053 1
    freq_table 2055 2 cpufreq_ondemand,acpi_cpufreq
    processor 21884 3 acpi_cpufreq
    mperf 1035 1 acpi_cpufreq
    vboxdrv 177483 0
    fuse 58669 3
    ext4 334626 3
    mbcache 4321 1 ext4
    jbd2 59098 1 ext4
    crc16 1077 2 bluetooth,ext4
    sd_mod 25515 5
    sr_mod 12956 0
    cdrom 31341 1 sr_mod
    ahci 18093 5
    pata_acpi 2396 0
    libahci 16581 1 ahci
    ata_piix 18569 0
    libata 154349 4 ahci,pata_acpi,libahci,ata_piix
    scsi_mod 110670 4 sg,sd_mod,sr_mod,libata
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 7 05:49:02 UTC 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Hewlett-Packard HP Compaq 6710b (GR680ET#ABH)/30C0, BIOS 68DDU Ver. F.10 01/11/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable
    [ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fe38000 - 7fff0000
    [ 0.000000] Allocated new RAMDISK: 37646000 - 377fd9b5
    [ 0.000000] Move RAMDISK from 000000007fe38000 - 000000007ffef9b4 to 37646000 - 377fd9b4
    [ 0.000000] ACPI: RSDP 000f7150 00024 (v02 HP )
    [ 0.000000] ACPI: XSDT bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: FACP bf7c8084 000F4 (v04 HP 30C0 00000003 HP 00000001)
    [ 0.000000] ACPI: DSDT bf7c84d8 1313E (v01 HP nc75xx 00010000 MSFT 03000001)
    [ 0.000000] ACPI: FACS bf7e7d80 00040
    [ 0.000000] ACPI: SLIC bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: HPET bf7c83c8 00038 (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC bf7c8400 00068 (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG bf7c8468 0003C (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA bf7c84a4 00032 (v02 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT bf7db616 00059 (v01 HP HPQNLP 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7db66f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7db997 0017D (v01 HP HPQMRM 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7dc4da 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
    [ 0.000000] ACPI: SSDT bf7dc739 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
    [ 0.000000] ACPI: SSDT bf7dc7df 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 2175MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x000bf7b0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000bf7b0
    [ 0.000000] On node 0 totalpages: 784191
    [ 0.000000] free_area_init_node: node 0, pgdat c14a3980, node_mem_map f5e55200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 4352 pages used for memmap
    [ 0.000000] HighMem zone: 552626 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5800000 s27648 r0 d21504 u2097152
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u2097152 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778063
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/d923fdbe-d6a8-4d2b-ab88-c36fcf8609bd resume=/dev/disk/by-uuid/1bdc571f-0c58-4972-91ba-3dddae8434d6 ro i915.modeset=1
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 12548608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf7b0)
    [ 0.000000] Memory: 3091000k/3137216k available (3380k kernel code, 45764k reserved, 1394k data, 524k init, 2227912k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14aa000 - 0xc152d000 ( 524 kB)
    [ 0.000000] .data : 0xc134d1bf - 0xc14a9c00 (1394 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134d1bf (3380 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f480c000 soft=f480e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1995.171 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.60 BogoMIPS (lpj=6650570)
    [ 0.003456] pid_max: default: 32768 minimum: 301
    [ 0.003553] Security Framework initialized
    [ 0.003616] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003695] Mount-cache hash table entries: 512
    [ 0.003948] Initializing cgroup subsys ns
    [ 0.006672] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.006747] Initializing cgroup subsys cpuacct
    [ 0.006816] Initializing cgroup subsys memory
    [ 0.006883] Initializing cgroup subsys devices
    [ 0.006942] Initializing cgroup subsys freezer
    [ 0.007001] Initializing cgroup subsys net_cls
    [ 0.007060] Initializing cgroup subsys blkio
    [ 0.007154] CPU: Physical Processor ID: 0
    [ 0.007213] CPU: Processor Core ID: 0
    [ 0.007272] mce: CPU supports 6 MCE banks
    [ 0.007335] CPU0: Thermal monitoring handled by SMI
    [ 0.007339] using mwait in idle threads.
    [ 0.008424] ACPI: Core revision 20110316
    [ 0.016678] ftrace: allocating 15225 entries in 30 pages
    [ 0.020043] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056096] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] PEBS disabled due to CPU errata.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073434] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100007] CPU 1 irqstacks, hard=f48c8000 soft=f48ca000
    [ 0.100009] Booting Node 0, Processors #1 Ok.
    [ 0.100111] smpboot cpu 1: start_ip = 9b000
    [ 0.006666] Initializing CPU#1
    [ 0.006666] CPU1: Thermal monitoring handled by SMI
    [ 0.196682] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203325] Brought up 2 CPUs
    [ 0.203383] Total of 2 processors activated (7983.85 BogoMIPS).
    [ 0.204342] devtmpfs: initialized
    [ 0.204342] PM: Registering ACPI NVS region at bf7c5400 (142264 bytes)
    [ 0.204342] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
    [ 0.204576] print_constraints: dummy:
    [ 0.204692] NET: Registered protocol family 16
    [ 0.204864] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.204937] ACPI: bus type pci registered
    [ 0.205089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.205165] PCI: not using MMCONFIG
    [ 0.207646] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
    [ 0.207708] PCI: Using configuration type 1 for base access
    [ 0.208277] bio: create slab <bio-0> at 0
    [ 0.210299] ACPI: EC: Look up EC in DSDT
    [ 0.253363] ACPI: SSDT bf7dbbdc 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
    [ 0.253972] ACPI: Dynamic OEM Table Load:
    [ 0.254117] ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
    [ 0.254418] ACPI: SSDT bf7dbee0 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
    [ 0.255665] ACPI: Dynamic OEM Table Load:
    [ 0.255810] ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
    [ 0.256209] ACPI: SSDT bf7dbb14 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
    [ 0.256814] ACPI: Dynamic OEM Table Load:
    [ 0.256959] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
    [ 0.257214] ACPI: SSDT bf7dbe5b 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
    [ 0.257803] ACPI: Dynamic OEM Table Load:
    [ 0.257949] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
    [ 0.290050] ACPI: Interpreter enabled
    [ 0.290115] ACPI: (supports S0 S3 S4 S5)
    [ 0.290361] ACPI: Using IOAPIC for interrupt routing
    [ 0.290441] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.291123] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
    [ 0.291198] PCI: Using MMCONFIG for extended config space
    [ 0.294937] ACPI: Power Resource [C27F] (on)
    [ 0.295774] ACPI: Power Resource [C29B] (on)
    [ 0.299470] ACPI: Power Resource [C1C5] (off)
    [ 0.301813] ACPI: Power Resource [C3BC] (off)
    [ 0.301942] ACPI: Power Resource [C3BD] (off)
    [ 0.302067] ACPI: Power Resource [C3BE] (off)
    [ 0.302193] ACPI: Power Resource [C3BF] (off)
    [ 0.302318] ACPI: Power Resource [C3C0] (off)
    [ 0.303130] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 0.303481] ACPI: No dock devices found.
    [ 0.303540] HEST: Table not found.
    [ 0.303600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.306875] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
    [ 0.313394] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.313457] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.313520] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.313593] pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xfedfffff]
    [ 0.313666] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
    [ 0.313739] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.313824] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [ 0.313871] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
    [ 0.313886] pci 0000:00:02.0: reg 10: [mem 0xe4600000-0xe46fffff 64bit]
    [ 0.313896] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.313903] pci 0000:00:02.0: reg 20: [io 0x4000-0x4007]
    [ 0.313938] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
    [ 0.313951] pci 0000:00:02.1: reg 10: [mem 0xe4700000-0xe47fffff 64bit]
    [ 0.314042] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.314102] pci 0000:00:1a.0: reg 20: [io 0x4020-0x403f]
    [ 0.314144] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.314204] pci 0000:00:1a.1: reg 20: [io 0x4040-0x405f]
    [ 0.314261] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.314287] pci 0000:00:1a.7: reg 10: [mem 0xe4800000-0xe48003ff]
    [ 0.314382] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.314388] pci 0000:00:1a.7: PME# disabled
    [ 0.314418] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.314442] pci 0000:00:1b.0: reg 10: [mem 0xe4804000-0xe4807fff 64bit]
    [ 0.314531] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.314536] pci 0000:00:1b.0: PME# disabled
    [ 0.314566] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.314655] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.314660] pci 0000:00:1c.0: PME# disabled
    [ 0.314693] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [ 0.314785] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.314790] pci 0000:00:1c.1: PME# disabled
    [ 0.314823] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
    [ 0.314915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.314920] pci 0000:00:1c.2: PME# disabled
    [ 0.314954] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
    [ 0.315045] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.315050] pci 0000:00:1c.4: PME# disabled
    [ 0.315083] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.315143] pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f]
    [ 0.315185] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.315244] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
    [ 0.315286] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.315345] pci 0000:00:1d.2: reg 20: [io 0x40a0-0x40bf]
    [ 0.315401] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.315427] pci 0000:00:1d.7: reg 10: [mem 0xe4808000-0xe48083ff]
    [ 0.315521] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.315527] pci 0000:00:1d.7: PME# disabled
    [ 0.315554] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.315645] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [ 0.315763] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.315841] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
    [ 0.315907] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
    [ 0.315986] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
    [ 0.316100] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [ 0.316118] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.316131] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.316144] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.316157] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.316170] pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
    [ 0.316225] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [ 0.316253] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
    [ 0.316266] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
    [ 0.316279] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
    [ 0.316292] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
    [ 0.316304] pci 0000:00:1f.2: reg 20: [io 0x4100-0x411f]
    [ 0.316317] pci 0000:00:1f.2: reg 24: [mem 0xe4809000-0xe48097ff]
    [ 0.316368] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.316373] pci 0000:00:1f.2: PME# disabled
    [ 0.316459] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
    [ 0.316523] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.316529] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.316538] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.316706] pci 0000:10:00.0: [8086:4222] type 0 class 0x000280
    [ 0.316763] pci 0000:10:00.0: reg 10: [mem 0xe4100000-0xe4100fff]
    [ 0.317108] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
    [ 0.317121] pci 0000:10:00.0: PME# disabled
    [ 0.317225] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
    [ 0.317289] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.317295] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
    [ 0.317303] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317441] pci 0000:18:00.0: [14e4:1693] type 0 class 0x000200
    [ 0.317474] pci 0000:18:00.0: reg 10: [mem 0xe4000000-0xe400ffff 64bit]
    [ 0.317618] pci 0000:18:00.0: PME# supported from D3hot D3cold
    [ 0.317624] pci 0000:18:00.0: PME# disabled
    [ 0.317669] pci 0000:00:1c.2: PCI bridge to [bus 18-18]
    [ 0.317733] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.317739] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
    [ 0.317747] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317813] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
    [ 0.317876] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
    [ 0.317882] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
    [ 0.317890] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317950] pci 0000:02:04.0: [1180:0476] type 2 class 0x000607
    [ 0.317980] pci 0000:02:04.0: reg 10: [mem 0xe4200000-0xe4200fff]
    [ 0.318011] pci 0000:02:04.0: supports D1 D2
    [ 0.318014] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.318020] pci 0000:02:04.0: PME# disabled
    [ 0.318049] pci 0000:02:04.1: [1180:0832] type 0 class 0x000c00
    [ 0.318077] pci 0000:02:04.1: reg 10: [mem 0xe4201000-0xe42017ff]
    [ 0.318189] pci 0000:02:04.1: supports D1 D2
    [ 0.318191] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.318197] pci 0000:02:04.1: PME# disabled
    [ 0.318276] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
    [ 0.318342] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.318348] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
    [ 0.318357] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.318360] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.318362] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.318365] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.318368] pci 0000:00:1e.0: bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode)
    [ 0.318371] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
    [ 0.318373] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.318431] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
    [ 0.318540] pci_bus 0000:00: on NUMA node 0
    [ 0.318544] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
    [ 0.318789] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
    [ 0.318876] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
    [ 0.318931] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
    [ 0.318991] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
    [ 0.319052] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
    [ 0.319149] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.319210] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.337338] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
    [ 0.337702] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
    [ 0.338019] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
    [ 0.338329] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
    [ 0.338733] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
    [ 0.339050] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
    [ 0.339358] ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
    [ 0.339713] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110316/pci_link-184)
    [ 0.339986] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.340072] vgaarb: loaded
    [ 0.340231] PCI: Using ACPI for IRQ routing
    [ 0.341816] PCI: pci_cache_line_size set to 64 bytes
    [ 0.341936] Expanded resource reserved due to conflict with PCI Bus 0000:00
    [ 0.342000] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.342003] reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff
    [ 0.342124] NetLabel: Initializing
    [ 0.342182] NetLabel: domain hash size = 128
    [ 0.342241] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.342313] NetLabel: unlabeled traffic allowed by default
    [ 0.342386] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.342454] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.342687] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.359996] Switching to clocksource hpet
    [ 0.363130] Switched to NOHz mode on CPU #0
    [ 0.363227] Switched to NOHz mode on CPU #1
    [ 0.367148] pnp: PnP ACPI init
    [ 0.367232] ACPI: bus type pnp registered
    [ 0.367404] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.367407] pnp 00:00: [mem 0x000e0000-0x000fffff]
    [ 0.367409] pnp 00:00: [mem 0x00100000-0xbf7fffff]
    [ 0.367477] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.367541] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.367605] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
    [ 0.367670] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.370899] pnp 00:01: [bus 00-ff]
    [ 0.370902] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.370905] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.370907] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.370910] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.370912] pnp 00:01: [mem 0xbf800000-0xfedfffff window]
    [ 0.370915] pnp 00:01: [mem 0xfee01000-0xffffffff window]
    [ 0.370917] pnp 00:01: [mem 0x000d0000-0x000dffff window]
    [ 0.371021] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.371604] pnp 00:02: [io 0x0378-0x037f]
    [ 0.371607] pnp 00:02: [io 0x0778-0x077a]
    [ 0.371619] pnp 00:02: [irq 7]
    [ 0.371622] pnp 00:02: [dma 1]
    [ 0.371722] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.371803] pnp 00:03: [io 0x0560-0x056f]
    [ 0.371806] pnp 00:03: [io 0x0570-0x057f]
    [ 0.371808] pnp 00:03: [mem 0xfed40000-0xfed44fff]
    [ 0.371843] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 0.371854] pnp 00:04: [io 0x00f0-0x00ff]
    [ 0.371860] pnp 00:04: [irq 13]
    [ 0.371893] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.371905] pnp 00:05: [io 0x0000-0x000f]
    [ 0.371908] pnp 00:05: [io 0x0080-0x008f]
    [ 0.371910] pnp 00:05: [io 0x00c0-0x00df]
    [ 0.371912] pnp 00:05: [dma 4]
    [ 0.371945] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.371954] pnp 00:06: [io 0x0061]
    [ 0.371988] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.371998] pnp 00:07: [io 0x0070-0x0071]
    [ 0.372000] pnp 00:07: [io 0x0072-0x0073]
    [ 0.372006] pnp 00:07: [irq 8]
    [ 0.372045] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.372112] pnp 00:08: [mem 0xfed00000-0xfed003ff]
    [ 0.372148] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.372159] pnp 00:09: [io 0x0060]
    [ 0.372161] pnp 00:09: [io 0x0064]
    [ 0.372167] pnp 00:09: [irq 1]
    [ 0.372202] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.372215] pnp 00:0a: [irq 12]
    [ 0.372255] pnp 00:0a: Plug and Play ACPI device, IDs SYN0134 SYN0100 SYN0002 PNP0f13 (active)
    [ 0.372387] pnp 00:0b: [io 0x0010-0x001f]
    [ 0.372390] pnp 00:0b: [io 0x0024-0x003f]
    [ 0.372392] pnp 00:0b: [io 0x004e-0x004f]
    [ 0.372394] pnp 00:0b: [io 0x0050-0x0053]
    [ 0.372396] pnp 00:0b: [io 0x0063]
    [ 0.372398] pnp 00:0b: [io 0x0065]
    [ 0.372400] pnp 00:0b: [io 0x0067]
    [ 0.372402] pnp 00:0b: [io 0x0074-0x0077]
    [ 0.372404] pnp 00:0b: [io 0x0090-0x009f]
    [ 0.372406] pnp 00:0b: [io 0x00a4-0x00bd]
    [ 0.372408] pnp 00:0b: [io 0x0500-0x055f]
    [ 0.372411] pnp 00:0b: [io 0x0800-0x080f]
    [ 0.372413] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [ 0.372415] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [ 0.372486] system 00:0b: [io 0x0500-0x055f] has been reserved
    [ 0.372549] system 00:0b: [io 0x0800-0x080f] has been reserved
    [ 0.372611] system 00:0b: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.372674] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.372737] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.373400] pnp 00:0c: [irq 23]
    [ 0.373462] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 0.373485] pnp 00:0d: [io 0x04d0-0x04d1]
    [ 0.373487] pnp 00:0d: [io 0x1000-0x107f]
    [ 0.373490] pnp 00:0d: [io 0x1100-0x113f]
    [ 0.373492] pnp 00:0d: [io 0x1200-0x121f]
    [ 0.373494] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
    [ 0.373497] pnp 00:0d: [mem 0xfec00000-0xfec000ff]
    [ 0.373499] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
    [ 0.373501] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
    [ 0.373503] pnp 00:0d: [mem 0xfed90000-0xfed99fff]
    [ 0.373589] system 00:0d: [io 0x04d0-0x04d1] has been reserved
    [ 0.373651] system 00:0d: [io 0x1000-0x107f] has been reserved
    [ 0.373713] system 00:0d: [io 0x1100-0x113f] has been reserved
    [ 0.373775] system 00:0d: [io 0x1200-0x121f] has been reserved
    [ 0.373837] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.373900] system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
    [ 0.373964] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.374027] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.374090] system 00:0d: [mem 0xfed90000-0xfed99fff] has been reserved
    [ 0.374153] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375020] pnp 00:0e: [mem 0x000cee00-0x000cffff]
    [ 0.375024] pnp 00:0e: [mem 0xfeda0000-0xfedbffff]
    [ 0.375026] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
    [ 0.375112] system 00:0e: [mem 0x000cee00-0x000cffff] has been reserved
    [ 0.375176] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
    [ 0.375238] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.375302] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375317] pnp: PnP ACPI: found 15 devices
    [ 0.375376] ACPI: ACPI bus type pnp unregistered
    [ 0.411992] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
    [ 0.412067] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.412130] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.412205] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.412279] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.412342] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.412417] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.412479] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
    [ 0.412540] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.412604] pci 0000:00:1c.0: bridge window [mem disabled]
    [ 0.412667] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.412734] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
    [ 0.412796] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff]
    [ 0.412862] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
    [ 0.412928] pci 0000:00:1c.1: bridge window [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.413007] pci 0000:00:1c.2: PCI bridge to [bus 18-18]
    [ 0.413069] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
    [ 0.413135] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
    [ 0.413200] pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.413280] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
    [ 0.413353] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
    [ 0.413419] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
    [ 0.413484] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.413565] pci 0000:02:04.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
    [ 0.413639] pci 0000:02:04.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
    [ 0.413702] pci 0000:02:04.0: BAR 13: assigned [io 0x5000-0x50ff]
    [ 0.413763] pci 0000:02:04.0: BAR 14: assigned [io 0x5400-0x54ff]
    [ 0.413825] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
    [ 0.413886] pci 0000:02:04.0: bridge window [io 0x5000-0x50ff]
    [ 0.413952] pci 0000:02:04.0: bridge window [io 0x5400-0x54ff]
    [ 0.414017] pci 0000:02:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414093] pci 0000:02:04.0: bridge window [mem 0xc8000000-0xcbffffff]
    [ 0.414159] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
    [ 0.414221] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
    [ 0.414287] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
    [ 0.414353] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414442] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414508] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.414518] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.414583] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.414593] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.414658] pci 0000:00:1c.2: setting latency timer to 64
    [ 0.414666] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414732] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.414741] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.414751] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414818] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.414821] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.414823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.414826] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff]
    [ 0.414828] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
    [ 0.414831] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
    [ 0.414834] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff]
    [ 0.414836] pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff]
    [ 0.414839] pci_bus 0000:10: resource 2 [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.414842] pci_bus 0000:18: resource 0 [io 0x6000-0x6fff]
    [ 0.414844] pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff]
    [ 0.414847] pci_bus 0000:18: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.414849] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
    [ 0.414852] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
    [ 0.414855] pci_bus 0000:28: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.414857] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
    [ 0.414860] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff]
    [ 0.414862] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414865] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
    [ 0.414867] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
    [ 0.414870] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.414872] pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff]
    [ 0.414875] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
    [ 0.414877] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
    [ 0.414880] pci_bus 0000:03: resource 0 [io 0x5000-0x50ff]
    [ 0.414882] pci_bus 0000:03: resource 1 [io 0x5400-0x54ff]
    [ 0.414885] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414887] pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff]
    [ 0.414935] NET: Registered protocol family 2
    [ 0.415062] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.415368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.415894] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.416143] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.416205] TCP reno registered
    [ 0.416264] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.416330] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.416507] NET: Registered protocol family 1
    [ 0.416583] pci 0000:00:02.0: Boot video device
    [ 0.416785] PCI: CLS 64 bytes, default 64
    [ 0.416838] Unpacking initramfs...
    [ 0.451007] Freeing initrd memory: 1760k freed
    [ 0.452054] apm: BIOS not found.
    [ 0.452259] audit: initializing netlink socket (disabled)
    [ 0.452332] type=2000 audit(1308999272.449:1): initialized
    [ 0.452758] highmem bounce pool size: 64 pages
    [ 0.452821] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.455200] VFS: Disk quotas dquot_6.5.2
    [ 0.455344] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.455524] msgmni has been set to 1689
    [ 0.455791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.456544] io scheduler noop registered
    [ 0.456604] io scheduler deadline registered
    [ 0.456686] io scheduler cfq registered (default)
    [ 0.456882] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.456945] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.457031] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.457087] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.457173] pcieport 0000:00:1c.2: setting latency timer to 64
    [ 0.457229] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.457316] pcieport 0000:00:1c.4: setting latency timer to 64
    [ 0.457371] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
    [ 0.457576] intel_idle: MWAIT substates: 0x22220
    [ 0.457578] intel_idle: does not run on family 6 model 15
    [ 0.457584] ERST: Table is not found!
    [ 0.457656] isapnp: Scanning for PnP cards...
    [ 0.814935] isapnp: No Plug & Play device found
    [ 0.815057] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.017338] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
    [ 1.019024] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.019854] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.019947] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.020050] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.020136] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.020222] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.020375] mousedev: PS/2 mouse device common for all mice
    [ 1.020520] rtc_cmos 00:07: RTC can wake from S4
    [ 1.041983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.043462] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 1.043553] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.043640] cpuidle: using governor ladder
    [ 1.043698] cpuidle: using governor menu
    [ 1.044008] TCP cubic registered
    [ 1.044067] NET: Registered protocol family 17
    [ 1.044133] Registering the dns_resolver key type
    [ 1.044208] Using IPI No-Shortcut mode
    [ 1.044349] PM: Checking hibernation image partition /dev/disk/by-uuid/1bdc571f-0c58-4972-91ba-3dddae8434d6
    [ 1.054023] PM: Hibernation image not present or could not be loaded.
    [ 1.054029] registered taskstats version 1
    [ 1.054676] rtc_cmos 00:07: setting system clock to 2011-06-25 10:54:34 UTC (1308999274)
    [ 1.054790] Initializing network drop monitor service
    [ 1.054922] Freeing unused kernel memory: 524k freed
    [ 1.055268] Write protecting the kernel text: 3384k
    [ 1.055352] Write protecting the kernel read-only data: 1032k
    [ 1.071412] udevd[68]: starting version 171
    [ 1.187956] SCSI subsystem initialized
    [ 1.210300] libata version 3.00 loaded.
    [ 1.213463] ata_piix 0000:00:1f.1: version 2.13
    [ 1.213484] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.213591] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.213968] scsi0 : ata_piix
    [ 1.214128] scsi1 : ata_piix
    [ 1.214568] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
    [ 1.214632] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
    [ 1.214903] ata2: port disabled. ignoring.
    [ 1.373683] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
    [ 1.386897] ata1.00: configured for MWDMA2
    [ 1.392272] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5
    [ 1.398036] ahci 0000:00:1f.2: version 3.0
    [ 1.398053] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.398174] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.398216] ahci: SSS flag set, parallel bus scan disabled
    [ 1.398301] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
    [ 1.398376] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
    [ 1.398453] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.398893] scsi2 : ahci
    [ 1.399132] scsi3 : ahci
    [ 1.399311] scsi4 : ahci
    [ 1.399475] ata3: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 44
    [ 1.399551] ata4: DUMMY
    [ 1.399608] ata5: DUMMY
    [ 1.453359] Refined TSC clocksource calibration: 1994.999 MHz.
    [ 1.453425] Switching to clocksource tsc
    [ 1.716689] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.718502] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.718578] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.718690] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
    [ 1.718695] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.719204] ata3.00: ATA-7: TOSHIBA MK1237GSX, DL132C, max UDMA/100
    [ 1.719267] ata3.00: 234441648 sectors, multi 16: LBA48
    [ 1.721104] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.721179] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.721289] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
    [ 1.721293] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.721801] ata3.00: configured for UDMA/100
    [ 1.721984] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
    [ 1.731236] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.731315] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.731598] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 1.731702] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.731837] sd 2:0:0:0: [sda] Write Protect is off
    [ 1.731902] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.731926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.845493] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
    [ 1.846050] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.761814] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.051896] udevd[281]: starting version 171
    [ 5.377558] fuse init (API version 7.16)
    [ 5.559732] vboxdrv: Found 2 processor cores.
    [ 5.559807] vboxdrv: fAsync=0 offMin=0x1d6 offMax=0x15ae
    [ 5.559854] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 5.559857] vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
    [ 5.781012] ACPI: acpi_idle registered with cpuidle
    [ 5.786645] Monitor-Mwait will be used to enter C-1 state
    [ 5.786678] Monitor-Mwait will be used to enter C-2 state
    [ 5.786684] Marking TSC unstable due to TSC halts in idle
    [ 5.786717] Switching to clocksource hpet
    [ 6.051738] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
    [ 6.051745] ACPI: Sleep Button [C2BF]
    [ 6.051804] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 6.051865] ACPI: Lid Switch [C153]
    [ 6.051938] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 6.051942] ACPI: Power Button [PWRF]
    [ 6.057265] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.066477] ACPI: AC Adapter [C239] (on-line)
    [ 6.114690] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.114702] ACPI: Battery Slot [C23B] (battery present)
    [ 6.114779] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.114785] ACPI: Battery Slot [C23A] (battery absent)
    [ 6.115381] wmi: Mapper loaded
    [ 6.172603] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 6.265090] ACPI: Fan [C3C1] (off)
    [ 6.265157] ACPI: Fan [C3C2] (off)
    [ 6.265220] ACPI: Fan [C3C3] (off)
    [ 6.265284] ACPI: Fan [C3C4] (off)
    [ 6.265348] ACPI: Fan [C3C5] (off)
    [ 6.379163] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 6.397190] input: HP WMI hotkeys as /devices/virtual/input/input5
    [ 6.463770] hp_accel: hardware type NC6710x found
    [ 6.513243] iTCO_vendor_support: vendor-support=0
    [ 6.570412] lis3lv02d: 12 bits sensor found
    [ 6.580235] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.580238] ACPI: Thermal Zone [TZ3] (41 C)
    [ 6.803030] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0]
    [ 6.831034] Linux agpgart interface v0.103
    [ 6.886604] usbcore: registered new interface driver usbfs
    [ 6.886833] usbcore: registered new interface driver hub
    [ 6.890217] usbcore: registered new device driver usb
    [ 6.901294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 6.901393] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    [ 6.901464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.926164] tg3.c:v3.117 (January 25, 2011)
    [ 6.926184] tg3 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 6.926195] tg3 0000:18:00.0: setting latency timer to 64
    [ 6.930903] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 16
    [ 6.930908] yenta_cardbus 0000:02:04.0: Socket status: 30000006
    [ 6.930913] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
    [ 6.930922] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
    [ 6.930926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
    [ 6.938390] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff]
    [ 6.938393] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff: excluding 0xe4200000-0xe423ffff
    [ 6.938409] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
    [ 6.938412] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff
    [ 6.963502] firewire_ohci 0000:02:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 6.990831] ppdev: user-space parallel port driver
    [ 6.995198] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 6.995231] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 6.995250] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 6.995254] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 6.995285] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 7.000019] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.006712] ehci_hcd 0000:00:1a.7: debug port 1
    [ 7.011560] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 7.011583] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4800000
    [ 7.023711] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 7.023894] hub 1-0:1.0: USB hub found
    [ 7.023900] hub 1-0:1.0: 4 ports detected
    [ 7.024015] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.024029] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 7.024034] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 7.024044] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 7.024158] firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 7.033900] uhci_hcd: USB Universal Host Controller Interface driver
    [ 7.037377] ehci_hcd 0000:00:1d.7: debug port 1
    [ 7.041256] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 7.041277] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4808000
    [ 7.053398] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 7.053920] hub 2-0:1.0: USB hub found
    [ 7.053926] hub 2-0:1.0: 6 ports detected
    [ 7.054087] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [ 7.054200] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [ 7.054704] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 7.055143] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 7.055302] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.055312] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 7.055317] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 7.055329] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 7.060031] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.063576] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
    [ 7.063770] hub 3-0:1.0: USB hub found
    [ 7.063775] hub 3-0:1.0: 2 ports detected
    [ 7.063872] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 7.063881] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 7.063886] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 7.063894] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 7.073405] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
    [ 7.073562] hub 4-0:1.0: USB hub found
    [ 7.073566] hub 4-0:1.0: 2 ports detected
    [ 7.073657] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.073665] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 7.073671] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 7.073679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 7.083408] parport_pc 00:02: reported by Plug and Play ACPI
    [ 7.083486] parport0: PC-style at 0x378 (0x778), irq 7
    [ 7.083667] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
    [ 7.083832] hub 5-0:1.0: USB hub found
    [ 7.083837] hub 5-0:1.0: 2 ports detected
    [ 7.083930] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 7.083938] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 7.083942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 7.083951] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 7.084066] , dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [ 7.094562] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [ 7.094640] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [ 7.096796] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
    [ 7.096914] Registered led device: hp::hddprotect
    [ 7.096935] hp_accel: driver loaded
    [ 7.097080] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
    [ 7.097249] hub 6-0:1.0: USB hub found
    [ 7.097254] hub 6-0:1.0: 2 ports detected
    [ 7.097349] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 7.097362] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 7.097366] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 7.097374] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 7.112415] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
    [ 7.112609] hub 7-0:1.0: USB hub found
    [ 7.112614] hub 7-0:1.0: 2 ports detected
    [ 7.120662] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.121675] tg3 0000:18:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1c:c4:c6:6f:ad
    [ 7.121680] tg3 0000:18:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    [ 7.121684] tg3 0000:18:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 7.121687] tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    [ 7.208882] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.380385] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
    [ 7.382688] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
    [ 7.383693] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    [ 7.384516] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    [ 7.385421] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
    [ 7.385491] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
    [ 7.385557] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
    [ 7.385625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    [ 7.510546] thermal LNXTHERM:01: registered as thermal_zone1
    [ 7.510549] ACPI: Thermal Zone [TZ4] (23 C)
    [ 7.526773] firewire_core: created device fw0: GUID 00023f99299d0810, S400
    [ 7.532557] [drm] Initialized drm 1.1.0 20060810
    [ 7.582098] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.582101] ACPI: Thermal Zone [TZ5] (22 C)
    [ 7.600111] thermal LNXTHERM:03: registered as thermal_zone3
    [ 7.600115] ACPI: Thermal Zone [TZ0] (51 C)
    [ 7.603276] thermal LNXTHERM:04: registered as thermal_zone4
    [ 7.603279] ACPI: Thermal Zone [TZ1] (49 C)
    [ 7.670060] usb 3-1: new full speed USB device number 2 using uhci_hcd
    [ 7.733614] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.733621] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.733637] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.733698] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 7.733729] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 7.856415] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
    [ 7.856421] serio: Synaptics pass-through port at isa0060/serio4/input0
    [ 7.897114] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
    [ 7.911295] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 7.948997] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.949004] i915 0000:00:02.0: setting latency timer to 64
    [ 7.962188] i915 0000:00:02.0: irq 46 for MSI/MSI-X
    [ 7.962194] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 7.962196] [drm] Driver supports precise vblank timestamp query.
    [ 8.070059] usb 5-2: new full speed USB device number 2 using uhci_hcd
    [ 8.090218] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 8.090555] [drm] initialized overlay support
    [ 8.104983] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    [ 8.104986] iwl3945: Copyright(c) 2003-2011 Intel Corporation
    [ 8.105051] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 8.105066] iwl3945 0000:10:00.0: setting latency timer to 64
    [ 8.160258] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    [ 8.160262] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
    [ 8.160407] iwl3945 0000:10:00.0: irq 47 for MSI/MSI-X
    [ 8.160646] Registered led device: phy0-led
    [ 8.253535] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    [ 8.476535] fbcon: inteldrmfb (fb0) is primary device
    [ 8.521567] Console: switching to colour frame buffer device 160x50
    [ 8.525923] fb0: inteldrmfb frame buffer device
    [ 8.525925] drm: registered panic notifier
    [ 8.526564] cfg80211: World regulatory domain updated:
    [ 8.526567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 8.526570] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.526573] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 8.526576] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 8.526578] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.526581] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.527338] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20110316/exoparg2-418)
    [ 8.527351] ACPI Error: Method parse/execution failed [\_SB_.C003.C098._DOD] (Node f4833588), AE_AML_PACKAGE_LIMIT (20110316/psparse-536)
    [ 8.527361] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20110316/video-1148)
    [ 8.528072] acpi device:01: registered as cooling_device7
    [ 8.528588] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
    [ 8.528684] ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
    [ 8.529162] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 9.024454] cfg80211: Calling CRDA for country: NL
    [ 9.027257] Bluetooth: Core ver 2.16
    [ 9.027284] NET: Registered protocol family 31
    [ 9.027286] Bluetooth: HCI device and connection manager initialized
    [ 9.027289] Bluetooth: HCI socket layer initialized
    [ 9.027291] Bluetooth: L2CAP socket layer initialized
    [ 9.028560] Bluetooth: SCO socket layer initialized
    [ 9.032087] cfg80211: Regulatory domain changed to country: NL
    [ 9.032091] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 9.032253] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032256] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032258] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032261] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [ 9.074179] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 9.074571] usbcore: registered new interface driver btusb
    [ 10.265890] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 10.367394] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.429791] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.622332] Adding 3421840k swap on /dev/sda2. Priority:-1 extents:1 across:3421840k
    [ 15.937897] coretemp coretemp.0: TjMax is assumed as 100 C!
    [ 15.937979] coretemp coretemp.1: TjMax is assumed as 100 C!
    [ 21.256096] iwl3945 0000:10:00.0: load

    The solution which is working for me is the following.
    Create the following file:
    /etc/modprobe.d/iwl3945.conf
    And put the following in it:
    options iwl3945 disable_hw_scan=0
    Of course the file name in modprobe.d can be different but must end with .conf
    via: http://ubuntuforums.org/showthread.php?t=1837729

  • Home Hub 3 Wireless Problems (V100R001C01B031SP09_...

    Dear all,
    I am a new BT infinity customer but have had about 5 different providers and about 7/8 wireless routers in the past - never had FTTC.
    BT infinity on a wired connection works great and I get approximately 65mbps (prediction 76mbps) which I'm happy with. The wireless through HomeHub3 is closer to 10-20mbps and most annoyingly it keeps dropping out. When I say dropping out I get the following: 
    http://bthomehub.home/html/hurl/800_auto_start.html
    The blue lights are all on the Home hub and my wireless devices still show a connection to the wireless but just no access to the internet.
    The very nice Indian call centre woman says its my Wifi going down and its because there is loads of equipment around it. THis is the same position that all my other wifi routers had and no problems with any of them.  I am trying to work out how to move the HH3 but to be honest, unless there is something I am doing wrong, then I probably need to buy a wireless router.
    I have been to http://www.btinternet.com/~cbeddoe/forumhelp/speed/hh3replace.html and any comments on these routers would be appreciated.
    I suppose what is different here is that I am using the new type B homehub but it is causing me problems.
    ANy help or thoughts would be appreciated.
    HSB
    p.s. should i really expect a 50mbps differential between wired and wireless?

    Its usually the default gateway address that gets corrupted, and this prevents the computer resolving addresses outside of your own network.
    You can check this by looking at your wireless adapter network setting and seeing if the default gateway is 192.168.1.254.
    As for the choice of router, any decent cable router should perform fine. Take a look at the thread that I reference on my home hub replacement page.
    Wireless itself, can prove quite unreliable a higher speeds.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • BT home hub 4 wireless connection issue on the Xbo...

    Hi all,
    It has been flagged to us that there may be an issue when connecting an Xbox 360 to the new BT home hub 4.
    As many of you are aware the new BT home hub 4 has dual wireless bands broadcasting in the  2.4 GHz and 5 GHz range.
    It seems that when connecting an Xbox 360 wirelessly to the hub 4, the Xbox will state that there is an error, like the one below.
    “There is more than one network in range that has this SSID, please change your router SSID before proceeding”
    This issue seems to be due to the fact then when the Xbox scans for the available wireless networks, it sees both SSID's  and insists that one of them must be changed in case of a conflict.
    This is an Xbox 360 issue and not a hub 4 problem
    When Xbox 360 was released some 8 years ago dual band routers were very uncommon; so the Xbox has not been setup to deal with this type of connection.
    To correct this issue we have some steps that you can follow so that you can connect to the hub. You will need to log into the BT home hub manager  and change the SSID on the 5 GHZ band being broadcasted from the hub.
    Steps to do this are as follows…….
    Log in to the Hub 4 in the normal manner setting up a new password or using the custom password that has been setup by the customer then navigate to the Advanced Settings
    Then select continue to advanced setting
    Then select wireless
    Then select 5GHZ
    After that you will need to change Sync with 2.4 from yes to NO
    After this has been done you will then be able to change the SSID of the 5GZ band adding a number or a letter to the end
    After all this has been done you will then need to click apply to save the changes
    You will now be able to connect the Xbox in the normal way using the default wireless key 
    BTCare Community Mod
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    Try changing the wireless channel in the hub. Enter 192.168.1.254 then go to wireless switch to manual and try another channel. You can try downloading inssider3 which will show netwrorks and their channels round about you
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Home hub 3, broadband connection dropping

    Hi, just a few days ago I recived my new home hub 3. The reason I wanted the upgrade from the hub 1 is because the broadband connection would drop and also the old hub would reset it self constantly.
    The new hub is much better in terms of not resetting itself, if i try and watch something on 4od etc, youtube, it feels like any stress and the braodband connection drops, I had this on the old hub but it feels like its happening more now.
    So much so I decided to make a paint version of my wiring so someone can maybe help me out.
    http://i144.photobucket.com/albums/r173/guysy1110/​routerproblem.png
    Sorry the paint image came out much smaller than I wanted.
    The main phone line is dowstairs in the lounge, its split into 2 using a 2 way splitter, one goes to the main phone which has a microfilter attached, the other plug leads up to the spare room and there a phone box (sorry not sure what its called) is in place, this box was split into another one because a long time ago there was a router that lived in the spare room (the split box is unused). Probably confusing people now, but the main box upstairs in the spare room is extended into my room and then a microfilter is used and then goes into the hub.
    The extension cable is FAR too long, possibly 10m of cable wound up and tucked behind the drawers. Could this be a problem? I guess so.
    So my main questions are, if both the router and main phone have new microfilters on, what other causes could keep my router dropping the broadband connection? the extension into my room is FAR too long possibly 10m which is wound up behind my drawers, first off im going to get a shorter cable. 
    Also the microfilter is closest to the hub, would it be better at the first source downstairs, or even in the spare room?
    Any suggestions would be great. thanks.

    Im reviving this thread, so far from the phone box upstairs Ive shortened the cable, It still goes into my room but now instead of having a ridiculous 15m amount of calbing unused Its a straight 3m from the other room to mine.
    This has slightly improoved things.
    However the hub still suffers and drops the broadband connection when under "stress" when the phone rings it sometimes drops, and when downloading files it drops halfway through if the file is large which is a massive pain.
    On the downstairs master socket I removed the facia and did a quiet line test on the inside socket, there was no noise. I used a corded phone. I wasnt sure if it mattered but I tested all other sockets using this method and none had any noise.
    I phoned BT and was advised to take the hub closest to the master socket, but if i do this I have no wireless card in my PC so cannot connect, The obvious option is to get a wireless card but that will cost money. As will buying the power lines.
    Any suggestions? I guess plugging the hub in downstairs and trying to connect to something is the best option.
    Any advice please?

  • Home Hub 3 Wireless Issue max 11Mb/s DL for b/g/n,...

    Hello people,
    I think there maybe a bug on the Home Hub 3, when i use wireless I get max speed of 11Mb/s for b/g/n and max speed 14 Mb/s for b/g. When i test the speed on on PS3 which is wired i get 32Mb/s.
    Ive checked all the other settings and checked the wireless on the ps3 too, which gives me 9.9Mb/s
    So this looks to me like the router........
    Upload is at 1.7Mb/s which is good.
    Anyone else seen this or got any suggestions?
    Shall i have a ticket to BT?
    Thanks
    Alex.

    depends on the wireless device you are using. if it is b/g, then those are the speeds i would expect. if it is 'n' then there may be a problem with wireless congestion.also, try turning off smart wireless on the hub,it may help. download inssider to see if you have wireless congestion on the channel you are using,if so, change to a less congested channel
    free your computer, use opensource
    i'm a linux user & very happy about it

  • BT Infinity Home Hub Has Suddenly Started Dropping...

    Hi,
    Had BT Infinity installed last September and has worked like a dream, no issues what so ever, with losing connection etc
    Suddenly on Monday night, the Home Hub, that came with it, (think it's Vs 2.0, black), now keeps dropping out, i.e. all lights go out. Starts back up again, all 3 lights go Blue, then bang, it goes out again.  It does this several times. Did this last night and again this morning.
    We have not done anything, moved anything, changed anything, got any new electrical equipment etc etc, so WHY has it suddenly started to do this?
    I've tried resetting both the home hub and the ADSL modem thing, to no avail
    Please help before I end up throwing it out of the window!!

    This is a HH3
    Mine is defo the HH2. As pictured below. by 3 blue lights, i meant, that they are the 3 that are always lit! i.e. no Phone!

  • BT Home Hub 4 Wireless Problems and My Findings

    Hi,
    I have got BT Broadband 2 days back, and provided Home Hub 4.
    I have found the speed to bad most time, even connected to directly modem over wire. 
    Today even not connecting some time.
    Then after tested in all the way, I have found the reason is My Hub 4 modem placed closed TV and when I switched on TV, then net speed go down (too slow, even take hrs to open google search page) and today even not open any website and shows as loading page hrs. When I have switched off TV(just done from remote, TV still connected to Power)  and opening websites with good speed and speed in speed test also showing good speed.. 
    I have never faced this issue with previous modem (from Non-BT provider) and Hub 4 modem is placed same place.
    Does any one have encounter this issue? 

    This link shows more items that can cause problems with broadband speed and stability  http://community.bt.com/t5/BB-Speed-Connection-Issues/Poor-Broadband-speed/m-p/14217#M8397
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Xbox 360 / home hub 3 ethernet speed issues

    Some advice/help needed please.
    I've connected by xbox 360 (slim) to my home hub 3 via Ethernet but it is connecting at random speeds.
    Some days it connects at 100mb (which I would expect it to connect at), other days it connects at only 10mb!
    I've tried using different ports on the back of the hub, making sure nothing else is connected but sometimes to no avail.
    I know the xbox is 10/100 compatable and tries to connect at the fastest speed available but I just don't understand why sometimes it connects at 10mb and everything I try it refuses to connect any faster!
    It's not like a pc where I can go into the network adapter to try to force connecting at 100mb.
    Hope someone can help.
    Thanks

    Hi Darrenjeff,
    Thanks for posting. Sorry you're having a few problems with your upload speed. You might find the answer here but if that deosn't help the next step might be to have a look here .
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • BT Infinity Home Hub 5 Wireless dropping - very fr...

    Hi,
    So I have recently moved into my new bought property and decided to leave my very good service of SKY at my other property just because BT offered me a slightly cheaper plan (which I very much regret leaving SKY now).
    Since day one of my BT infinity broadband activation (almost 2 months ago) I have been monitoring my wireless broadband and the speed is good however the connection drops around 5-8 times a day. This is very frustrating when you pay almost £70 per month and the service you get in return doesn't justify that, I feel rubbed.
    So during the last few weeks I've been in the process of going through the horrendous BT customer service which there's only one word to describe it "Useless". All they have told me so far after various test is that there's no issue with my line and there seems to be an issue with wireless (which ironically I've been telling them from day one). I'm quite tech savvy myself when it comes to networking and wireless issues. The only thing BT is telling me now then is that because this is a wireless issue they have nothing to do with it!!! How disgraceful is that? And I know for a fact that I just may be having a faulty router which BT won't admit to it.
    These are the summary of the things they have told me over the phone:
    1. Problem is with my wireless and they are not responsible for fixing this. Surely this is against the "Sale of Goods Act 1979"?!
    2. This could be an interference issue (I.e. Microwave and other appliances). As I stated above this is a new home with NOTHING in it so it certainly isn't an interference issue. The router is sitting in middle of the room with nothing in and me standing next to it p.s I've run all the necessary changes (channels, reset, upgrade, frequency you name it I have tried it)
    3. BT is telling me dropping WiFi is normal and they don't see an issue with this. Seriously? Would you pay £70 every month for a service which drops few times every day? During Skype call, video streaming, browsing, messaging, BT TV.....In that case BT needs to calculate all the downage time every year and pay me the money back!!!
    I have seriously tried everything and I believe this is an issue with a faulty router however BT will not provide me a replacement. Surely there's a BT customer service out there who can help me..
    Frustrated customer.
    Armin

    Hi Armin_6150,
    Thanks for posting. It looms like you've been through all the diagnostics so we'll need to take a closer look. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. 
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Maybe you are looking for