After installing 10.8.1 I now can no longer backup my system and get this message

Time Machine couldn’t complete the backup to “Richard Witham's Time Capsule”.
The backup disk image “/Volumes/Richard Witham's Time Caps/Richard Witham’s MacBook.sparsebundle” is already in use.
any suggestions?

Open > http://pondini.org/TM/C12.html

Similar Messages

As of today, I can no longer or Excel. I get this message: You can't open the application "Microsoft Excel" because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted 2x

As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.

The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2)

After installing 1.5 with the msi, can I then zip it up and use it...

After installing 1.5 with the msi, can I then zip it up and use that version on another computer? I've done this successfully already for my needs etc. Just not sure if this was "kosher" etc.
I've installed Java JRE/JDK 1.5 using:
jdk-1_5_0_12-windows-i586-p.exe
I installed it on computer A at C:\jdk1.5.0_12. I then zipped it up and ran it successfully on computer B for my Tomcat service needs. It went seamlessly. However, did I over look any risks doing it this way. I did it this way because the MSI prompts a user for a install path. I need it for both the JRE/JDK to use C:\jdk1.5.0_12. Zipping up my installed version prevents that pesky user-error stuff/support tickets due to user error stuff.
Granted, I'd rather have users fill out a support ticket due to a typo then erroneously think I was successful at repackaging Java for our needs etc. Follow?
And therefore, was it ok to zip it up and port it?
Thanks a lot for your time and help. Truly appreciated!
Jeff

JyefuDCJS wrote:
After installing 1.5 with the msi, can I then zip it up and use that version on another computer? ...No. It will fail on Macs and Unix/Linux (don't know, don't care about other Windows boxes).
[Java Web Start|http://java.sun.com/javase/technologies/desktop/javawebstart/index.jsp] *(<- link)* is a better alternative for installing (and updating) Java apps. JWS works on all OS' for which there is a JRE.

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

HT1338 Tried to install update to Mountain Lion and get this message: OSXUpdCombo 10-1.8 image data corrupted.

Tried to install update to Mountain Lion and get this message: OSXUpdCombo 10-1.8 image data corrupted.

Try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once. You can download from the Safe Mode.
Safe Mode
Safe Mode - About

HT5271 I can no longer use Pandora because I get a message saying download adobe 10.1 or later. I think I have a later version, 11.?, which I have downloaded. but I still get the message and can't play Pandora.

I can no longer use Pandora because I get a message saying download adobe flash 10.1 or later. I think I have a later version, 11.?, which I have downloaded. but I still get the message and can't play Pandora.
How do I determine that in fact I have the appropriate version of adobe flash to run Pandora.

How do I determine that in fact I have the appropriate version of adobe flash
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here;
/Library/Internet Plug-Ins
Click Go
Then right or control click the Flash Player.plugin then click Get Info
The version number is noted there.
Assuming you are using Safari ...
Check Safari > Preferences > Security
Make sure: Enable plug-ins is enabled.
Sometimes uninstalling the currently installed Flash plugin then reinstaliing new can help > Troubleshoot Flash Player | Mac OS
If you have the ClickToFlash extension installed, that can prevent Flash based video / audio from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
edited by: cs

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

HT201364 Can someone help out. I'm getting this message when i try to download. The product distribution file could not be verified. It may be damaged or was not signed.

Can someone help out. I'm getting this message when i try to download. The product distribution file could not be verified. It may be damaged or was not signed.

See this link from another similar question. It may need patience to resolve. I think Thomas Reed's suggestion is best place to start.
App Store rejects buy of Mountain Lion: Apple Support Communities

After installed SP1 for SQL Server 2012, can no longer export to csv

After installing SP1 today via Windows Update, I am no longer able to export data to csv using the SQL Server Import and Export wizard. I get the following error message:
"Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
"Column "col1": Source data type "200" was not found in the data type mapping file."...
(The above line repeats for each column)
The work-around I have to do is to manually map each column in the "Edit Mappings..." option from the "Configure Flat File Destination" page of the wizard. This is an extreme inconvenience to have to have to edit the mappings and change
each column to "string [DT_STR]" type from "byte stream [DT_BYTES]" type each time I want to export to csv. I did not have to do this before installing SP1; it worked perfectly for months with hundreds of exports prior to this update and
no need to modify mapping.

I am running Windows 7 64-bit, SQL Server 2012 Express edition. Again, just yesterday from Windows Update, I installed SQL Server 2012 Service Pack 1 (KB2674319), followed by Update Rollup for SQL Server 2012 Service Pack 1 (KB2793634). This situation was
not occurring before these updates were installed, and I noticed it immediately after they were installed (and of course I restarted my computer after the updates).
In SSMS I just now created a test DB and table to provide a step-by-step with screenshots.
Here is the code I ran to create the test DB and table:
CREATE DATABASE testDB;
GO
USE testDB;
GO
CREATE TABLE testTable
id int,
lname varchar(50),
fname varchar(50),
address varchar(50),
city varchar(50),
state char(2),
dob date
GO
INSERT INTO testTable VALUES
(1,'Smith','Bob','123 Main St.','Los Angeles','CA','20080212'),
(2,'Doe','John','555 Rainbow Ln.','Chicago','IL','19580530'),
(3,'Jones','Jane','999 Somewhere Pl.','Washington','DC','19651201'),
(4,'Jackson','George','111 Hello Cir.','Dallas','TX','20010718');
GO
SELECT * FROM testTable;
Results look good:
id   lname   fname   address   city   state   dob
1   Smith   Bob   123 Main St.   Los Angeles   CA   2008-02-12
2   Doe   John   555 Rainbow Ln.   Chicago   IL   1958-05-30
3   Jones   Jane   999 Somewhere Pl.   Washington   DC   1965-12-01
4   Jackson   George   111 Hello Cir.   Dallas   TX   2001-07-18
In Object Explorer, I right-click on the [testDB] database, choose "Tasks", then "Export Data..." and the SQL Server Import and Export Wizard appears. I click Next to leave all settings as-is on the "Choose a Data Source" page, then on the "Choose a Destination"
page, under the "Destination" drop-down I choose "Flat File Destination" then browse to the desktop and name the file "table_export.csv" then click Next. On the "Specify Table Copy or Query" page I choose "Write a query to specify the data to transfer" then
click Next. I type the following SQL statement:
SELECT * FROM testTable;
When clicking the "Parse" button I get the message "This SQL statement is valid."
On to the next page, "Configure Flat File Destination" I try leaving the defaults then click Next. This is where I am getting the error message (see screenshot below):
Then going to the "Edit Mappings..." option on the "Configure Flat File Destination" page, I see that all columns which were defined as varchar in the table are showing as type "byte stream [DT_BYTES]", size "0", the state column which is defined as char(2)
shows correctly however with type "string [DT_STR]", size "2" (see screenshow below):
So what I have to do is change the type for the lname, fname, address and city columns to "string [DT_STR]", then I am able to proceed with the export successfully. Again, this just started happening after installing these updates. As you can imagine, this
is very frustrating, as I do a lot of exports from many tables, with a lot more columns than this test table.
Thanks for your help.

Trying to reload firefox and getting this message, when moving to the applications folder: "The operation can't be completed because you don't have permission to access some of the items."

Been having problems with Firefox/internet for several days, and all my updates seemed current. I decided to try to reload and have removed the other icons/download attempts from the app file. When I try to drag the icon into apps, I now get this message:
The operation can’t be completed because you don’t have permission to access some of the items.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
Failed to verify the preflight file. It is not signed by Apple.
How to I get past this? I cannot find anything referencing preflight file. Who can identify this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL. Log out, log back in, and test.

After installing iOS 7.1.1, I can no longer send links from Safari using my Yahoo account

I frequently send links from Safari, and as my Yahoo is my default email, it obviously sends from Yahoo. However, since installing iOS 7.1.1, those messages end up in my outbox, and I get a message saying "a copy of the message has been placed in your outbox. Sending the message content to the server failed." I am able to change my sending email to Gmail or my company domain, though, and the message will go through without issue. But changing the sending account to a different Yahoo account generates the same failure message.
Is this a Yahoo problem (which wouldn't surprise me)? Or is it an iOS 7.1.1 bug (which also wouldn't surprise me)? Anyone else having the problem?
For the record, I have rebooted the iPad Air 128GB. I have tried this on multiple wifi connections (AT&T Uverse at the office, Time Warner cable at home, blazing fast local fiber company at the gym). The only thing I have not done is remove & reinstall the Yahoo accounts. I thought I'd pick the collective brains of the community first.
Thanks!!

Addendum
Sending straight from the mail client in any/all of the Yahoo accounts works just fine. The bug just seems to happen when sending links from Safari.

Trying to load 4.o and get this message "can not find archive file"

Trying to install 4.0 and get the following message:
can not find archive file

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Trying to delete Office for Mac and getting this message: The operation can't be completed because the item "com.microsoft.DocumentConnection.plist" is in use.

I am trying to remove Office for Mac from my Macbook Air. I've deleted the files and moved to Trash, but can not empty Trash. This message continues to display when I attempt to empty Trash and thereby delete all Microsoft plist files...

You can't delete Office simply by throwing the app in the trash.
Here are the instructions for removing it, follow them exactly.

Help, I can no longer open my IPhoto, I get a message that says the library needs to be upgraded to work with this version of IPhoto

Help, I can no longer open my I Photo's. I get a message that says the library needs to be updated to work with this version of IPhoto. What have I done and what can I do to view them again.

You're welcome
It should have showed you a progress bar, and hopefully it was moving steadily

After installing 10.8.1 I now can no longer backup my system and get this message

Similar Messages

Maybe you are looking for