After installing 2.2.1 my phone is hot

After installing 2.2.1, my phone runs much hotter and battery life is worse. I know the second is a known issue (at least on discussion boards - I don't think Apple has acknowledged). Is the first (heat) a known issue? Any solutions?

I just received this link about this issue. Something about removing the cap on wifi which causes it to run hot. And apparently Apple is replacing the phones, but this is the first I have heard about it. I installed 2.2.1 as well, though I haven't noticed excess heat, my batter has been draining very quickly. Maybe a short term solution is to shut off WiFi until the next version of the software comes out in the summer or they come up with a fix.
anyway, here is the link:
http://theappleblog.com/2009/04/08/apple-replacing-iphones-with-221-related-wi-f i-issues/

Similar Messages

  • After installing new software for i phone it give me statement your phone could not be activated because activation serer is temporarily unavailable

    after installing new software for i phone it give me statement your phone could not be activated because activation serer is temporarily unavailable what should i do ???

    Usually this is because the activation server is temporarily unavailable. Try again in 20 minutes or so.

  • After installing Mountain Lion, my iMac gets VERY hot!

    I installed Mountain Lion yesterday onto my mid-2010 21.5" iMac.  Today, while running it normally, it got so very hot that I couldn't even touch the aluminum back.  The heat could be felt through the glass on the screen.
    The fans could be heard, but didn't seem to be going overtly fast. CPU, memory, and disk usage all appeared normal.
    I had Firefox, mail, Excel, and 1Password open at the time; certainly the apps weren't taxing the system.
    Anyone else have this problem?  Any suggestions?
    Thanks!

    Although the specs for Mountain Lion say it will run on 2 GB of ram, you really need 4 GB to run well.  You can look at Launchpad > Utilities > Activity Monitor to see the memory usage with software open.  If there are a lot of page swaps, in and out, you need more memory.
    Good sources are OWC and Crucial for guaranteed compatible memory.

  • Z10 died after installing 10.2.1.537

    I downloaded and installed 10.2.1.537 using BB Link and 1st I had battery life issues which got solved after 1 day, but the 3rd day after installing the new update my phone died, and now it just doesn't turn on. If I connect it to the wall charger or PC, the Blackberry Logo comes on and then it turns off again (red led on), then it goes "on" again showing the BlackBerry logo and it does that in an infinite loop. If I try to turn it on unplugged, it just doesn't respond.
    I didn't download any beta software, nor the incorrect version since BB Link told me there was an update.
    My phone operator is Entel and I'm currently in Chile, the phone I'm using is a Z10 STL-1.
    Please help me, I've been checking other forums and even though the situation does not seem to be widespread, there are several other users who have the same problem with no apparent solution.

    You have a couple of options to revivie your device...  
    How to Reload your Blackberry10 OS    
    Upgrading OS10 devices using Autoloader
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can't view horizontally after installing 7.0.3 on Iphone4

    Immediately after installing 7.0.3 my phone does not have horizontal viewing for anything.  It will not tilt to the side to type messages, view photos, read emails, etc.  Can you please help me?  Thanks

    You activated portrait mode lock.  Do you see a small lock with circular arrow icon next to the battery level icon?
    To defeat this, open Control Center by sliding a finger up from the bottom of the screen and touch the portrait mode lock icon at top right.  You then will be able to use landscape mode.

  • HT1430 Can't find my podcasts in itunes on my iphone after installing iOS?

    After installing iOS, I synced my phone with itunes, and the podcasts seem to have disappeared from my phone. It isn't even an option under "more," anymore.

    Thanks! This worked, and now I feel a little stupid.

  • HT4623 still having issues with keyboard after installing 8.0.2

    I am still having keyboard issues after installing 8.0.2.  Phone is useless now.  Please provide help ASAP.

    what help do you need?  What are the "issues" you're having?
    If you don't provide any information, you can't possibly expect a helpful answer.

  • HT4623 iphone not working after installing update

    received notice that io6 was available to be installed.  after installing the io6 update the phone turned off and will not power on

    Read the trouble-shooting suggestions here:
    http://www.apple.com/support/ipad/wifi/

  • After installing the latest IOS 5, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?pleas help.. thanksafter installing the latest IOS 5, my phone went off and all i can see now is an apple logo.i can´t even o

    after installing the latest IOS 5 on my iphone 4, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?please help.. thanks

    thanks a lot.. its ok now..

  • HT1476 Why after installing i0s7.0 to my Apple 4 I phone I can no longer charge it with a hydro connection. It did it before this update

    Why after installing i0S7 to my Apple i phone 4 I can no longer charge my phone by plugging it into electricity. I could before and now since this update it now longer works. How can I fix this?

    Are you using a genuine Apple power adapter? iOS 7 will prevent certain non-Apple power adapters from operating due to safety concerns. 
    Counterfeit chargers are dangerous and potentially lethal.
    http://www.apple.com/support/usbadapter-takeback/
    The program ends October 18, so don't wait.

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • HT1766 after installing ios7, my phone now is always in headphone mode, how to restore back to ringer mode

    after installing ios7, my phone now is always in headphone mode, how to restore back to ringer mode

    I did a search on "recovery mode loop"..you might take a look at the following threads to get some ideas...some mention is made of "USB conflicts"..not sure how valid that is.....they also mention doing a hard power down of the device...sounds like if you absolutely can't get it out of recovery mode, a trip to the Genius bar will be necessary...
    https://discussions.apple.com/message/15357775#15357775
    https://discussions.apple.com/message/16248523#16248523

  • TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

    My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

    Eek.  Sounds like something in the app caused some serious software issues.  You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

  • Iphone 4s locking up after installing 8.0.2 how to fix this without getting a newer phone?  Other 4s users are experiencing same difficulties.

    After installing IOS 8.0.2 the phone has been locking up when using apps such as Facebook.  The screen becomes unresponsive for several minutes after loading an app.  Also, if you double click the home button to shut down the app the screen is unresponsive or the screen becomes black.  I did not have this problem until installing the IOS 8.0.2.  I have talked to a couple other people that have the 4S and they are experiencing the same problems.  The iphone 5 users are not experiencing this problem.  I suspect the processor is too slow to handle the new IOS and the 4S should have not be allowed to update to this IOS if the system was not going to work properly.  Is there a way to fix IOS 8 or return to IOS 7?

    Sorry, but there is no way to downgrade the iOS. To make sure your backup did not contain damaged files after upgrading and restoring, set it up as new device without using the backup and no 3rd party apps installed. If the phone is working after that, add the 3rd party apps back.
    iOS: How to back up your data and set up your device as a new device

  • 6.1.3 update....i phone 5 present problems after installing

    after installing ios 6.1.3 i face many problems.one of them is that during the calls after 5 or 6 minutes the phone close and it writes recalling.
    when i use some applications like facebook or games suddenly it stops working and i am out of the application

    It won't. Only the carrier it's locked to can unlock it.
    (101060)

Maybe you are looking for