After installing 6.1 my downloads are very slow
After installing 6.1 my downloads are very slow
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset Network Settings
Setings>General>Reset>Reset Network Settings
Similar Messages
-
After installing iOS7 update my WIFI is very slow.
After installing iOS7 update my WIFI is very slow in my iPad 3rd Gen, iPhone 5 and iPhone 4. Is there a fix for this problem? I've reset my modem and AirPort Extreme 3rd gen. Problem still exists. Help
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset Network Settings
Setings>General>Reset>Reset Network Settings -
after installing ios7 on my ipad the keyboard is very slow, delayed. text, email and passcode.
Hi Knackerman, I was racking my brain trying to think how I did this and then I remembered that at the time because of other problems I was having with my iPad and it was under extended warranty, they offered to replace it for me.
When I went to collect new one they asked if I wanted the to download iOS7 and they replied, NO, I did not, well that was enough for me and I told them to please leave it as is.
I just ignore all the reminders I receive to download iOS7 on my phone and iPad.
I am very happy with my 6 version.
I am very sorry I am unable to help, I know how you feel, I hated it, it caused so many glitches to my otherwise perfect iPad before instalment.
Overall though, I think Apple has to shake itself up, they are getting left behind in the Samsung wake. -
After installing Mountain lion, macbook air 2011 very slow
After installation of Mountain lion my macbook air 2011 got very slow. There has been a firmware upgrade too. Can you help?
Hi guys! Just installed ML on my early 2009 MBAir (after market upgraded to a 240g SSD, but still just 2g of ram), and I panicked a bit at first when it turned out to be painfully slow and not displaying right (+slow trackpad!).
Bear in mind that the first thing ML will do is index your files for spotlight, which takes a while and is a bit of a resource hog that will slow everything else down and cause your machine to heat up.
I let it work all night, but by morning, my CPU usage was STILL at 100% and everything slow...
Activity monitor showed nothing over 10% CPU usage... First tip was to display ALL processes in Activity monitor, and not just MY processes, to see what exactly was sucking up my CPU!
Then, and it seems to often be the culprit on MBA's, it turned out that the kernel_task process was using up to 170% of my CPU usage (!). Problem is, that process sort of does a million things, so it can be hard to pinpoint the actual issue.
One of the things it does though, is work against overheating...
Given the download+install+indexing, my machine had been working all day and night, and was indeed getting super hot. Turning it off and letting it cool down for a whole fixed it all.
Kernel_task is back to normal, CPU usage is normal, display and trackpad are back to perfect. And in the end, ML is snappier than SL for me, even with the bare minimum in memory!
Good luck! <3 -
After installing lion on macbook mid2010, is very slow
I had installed snow leopard macbook and was very fast, change a lion and has become slow, I delete my HD and reinstall the lion had no improvement, I have 2 months after buying the machine and I repent for not having purchasedbetter macbook pro.
help please.I guess Lion wants more memory . Not just only 2 or 4 . Lion is like a Mac windows vista
Message was edited by: Mystery of life -
Two days ago I installed Mavericks to my MacBook Pro. The computer is very, very slow. I did not have that problem before. Also as I change between windows the whole screen is blurred with horizontal lines. Once safari, email or another app opens up it take a few minutes before I can actually use it. The cursor pauses like crazy. Quite frustrating. I checked the captibality before downloading and it met all the requirements. Help please!!
..Step by Step to fix your Mac
How to revert OS X back from Mavericks -
HT201365 after installing iO7 my i-phone 4 very slow, even when typing :(
After installing iO7 my i-hpone 4 went super slow What can I do to go back to regular speed?
DO NOT get use to it, fix it !! go to the Apple Store or something, what I did was what Lawrence Finch told me and it did NOT work, so i decided to RESET all SETTINGS and I'm back to normal speed, YESSS
NOTE (very important): BACK UP YOU i-PHONE, BEFORE YOU TRY ANY OF THESE -
After installing Lion, my iMac Intel is very slow and need to login twice.
Tried downioading another copy of Lion to reinstall, but I get an error message stating it cannot continue. Has anyone had this problem before? Thanks.
hopefully this is what you need:
Mar 13 23:53:53 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Finished operation queue
Mar 13 23:54:28 Peter-Andrew-Gonzalezs-iMac diskmanagementd[365]: DM ->T+[DMToolBootPreference getPartitionBootability:]: inUDS=0x10ddd3c30=disk2s3=Mac OS X Install ESD
Mar 13 23:54:28 Peter-Andrew-Gonzalezs-iMac diskmanagementd[365]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootable=1 (bootable right now without any further action)
Mar 13 23:54:28 Peter-Andrew-Gonzalezs-iMac diskmanagementd[365]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootCapable=0 (bootable if you call MKCFPrepareBootDevice)
Mar 13 23:54:28 Peter-Andrew-Gonzalezs-iMac diskmanagementd[365]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootSurgeryRequired=0 (for primitive MBR on BIOS, add boot block and loader)
Mar 13 23:54:28 Peter-Andrew-Gonzalezs-iMac diskmanagementd[365]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMFSSurgeryRequired=0 (for primitive MBR on BIOS, add boot block and loader)
Mar 13 23:54:28 Peter-Andrew-Gonzalezs-iMac diskmanagementd[365]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMNewfsRequired=1 (bootable with MKCFPrep but it will rudely carve)
Mar 13 23:54:28 Peter-Andrew-Gonzalezs-iMac diskmanagementd[365]: DM <-T+[DMToolBootPreference getPartitionBootability:]: MKerr=0 out=12=0xc
Mar 13 23:54:29 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Extracting files from /Applications/Install Mac OS X Lion.app/Contents/SharedSupport/InstallESD.dmg
Mar 13 23:54:30 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Failed to write imgsrc info to nvram
Mar 13 23:54:30 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Extracting Boot Bits from Outer DMG:
Mar 13 23:54:31 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Copied kernelcache
Mar 13 23:54:31 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Copied Boot.efi
Mar 13 23:54:31 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Ejecting disk image
Mar 13 23:54:41 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Generating the com.apple.Boot.plist file
Mar 13 23:54:41 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Linking self-contained dmg into mutable product
Mar 13 23:54:41 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: com.apple.Boot.plist: {
"Kernel Cache" = "/Mac OS X Install Data/kernelcache";
"Kernel Flags" = "container-dmg=file:///Mac%20OS%20X%20Install%20Data/InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Mar 13 23:54:41 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Done generating the com.apple.Boot.plist file
Mar 13 23:54:41 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Blessing / -- /Mac OS X Install Data
Mar 13 23:54:41 Peter-Andrew-Gonzalezs-iMac InstallAssistantTool[527]: Couldn't bless the installation disk: /
Mar 13 23:55:10 Peter-Andrew-Gonzalezs-iMac Install Mac OS X Lion[344]: Failed to remove mutable product /Mac OS X Install Data -
Whenerver i downlaod things like of 10 mb it says it will take 9 minutes or somthing. Before update and after update its downloading are very slow. When i started playing Call of Duty 4 Multiplayer after sometime my downloads are slower. I downloaded it from utorrent. That files name is Call of Duty 4 Multiplayer.exe it is an rar extractor.
I Think all my web browsers are download slower even Orbit download maneger
-
Since download of Firefox Hello my home desktop & laptop, both on Windows 7, are very slow to open. I have refreshed firefox, removed download history and turned off the anti virus software in extensions. All the plugins are up to date. Can we revert back to Firefox without Firefox Hello?
Firefox Hello is simply a wrapper for technology already in Firefox, it doesn't negatively impact performance if you aren't using it. Are you saying that your entire computer is slow or just Firefox?
-
hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??
Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Having trouble with the iOS 8.1.1 download. Very slow. Just keeps saying preparing update for about 4 hours now. Help
Hello there, Cmm405.
If you're updating your iPad with an over-the-air iOS update, the following Knowledge Base article offers up some practical steps for troubleshooting some of the issues that can arise:
Resolve issues with an over-the-air iOS update - Apple Support
In your instance, these sections may prove particularly useful:
Download takes a long time, or you can't reach update server
iOS updates require a persistent Internet connection, and the time it takes to download the update will vary according to the size of the update and your Internet speed. You can use your device normally while downloading the iOS update, and iOS will notify you when you can install the update. To improve the speed of the download, avoid downloading other content.
If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Outlook 2010 - Opening attachments are very slow
Recently we have migrated windows XP, Office 2007 to Windows 7 Enterprise edition with Office 2010.
After migration found opening outlook 2010 attachements are very slow.
First time when we click the attachments the orange bar is running for a while in outlook then only the appropriate program getting opened.
Approx. it takes 25sec to open any attachments (word, excel, pdf ...even txt files)
Second time if we open same attachment then able to open immediately, if we leave the outlook for a while then we try to open the same attachement then again it takes 25sec to open.
At the moment when we click the attachment the file getting saved immediately to the outlook temp directory.
It look like only opening appropriate program getting delay for some reason.
I tried to disable all the Add-ins, but still same problem.
Can some one please help?
Parani Dhasarathan.Hi,
I am Chetan Savade from Symantec Technical Support Team.
Are you using SEP 12.1 RU3 (12.1.3001.165) Prior version? If yes, it's a known issue please upgrade to the latest version of SEP. SEP release details are available here:
http://bit.ly/m0vOJp
Here are more details about known issu:
Attachments in Outlook 2010 take longer to open with Symantec Endpoint Protection installed
Fix ID: 3086057
Symptom: Attachments in Outlook 2010 are slower to open with Symantec Endpoint Protection 12.1 installed and the Outlook Auto-Protect feature enabled. Attachments in Outlook 2007 are not affected.
Solution: Optimized the Outlook Auto-Protect plug-in to avoid processing successive callbacks
Reference: New fixes and features in Symantec Endpoint Protection 12.1.3
http://www.symantec.com/docs/TECH206828
Best Regards,
Chetan -
IDM install of weblogic on solaris t200 very slow
Folks
Has anyone installed weblogic or IDM solution on solaris T2000. The startup and responses are very slow. It takes 20 minutes to bring up the admin server and soa server with the base services starts up in over 40 minutes. Bottom line unusable.
Config:
Soalris 10
Jrockit: 1.6
Weblogic and IDM Suite latest dot 5 release
Is there something obvious we are missing.... Any suggestions recommendations???
The same config on linux is blazing but that is not our environment.....
Thanks
MILook up metalink Oracle has mentioned that there is a problem with T200 and the combination of weblogic/soa and other servers with no solution... They suggest T4000 as the starting point....
Cheers -
CS4 apps are VERY slow to open Windows file browser with File Open or File Save As commands
We are running CS4 on Windows 7 with all available updates installed. Photoshop and the other CS4 applications are VERY slow to open a Windows file browsing window to select files when File Open or File Save As menu options are run -- it can take as long as a minute or two for the window to open. Once the window opens and a file is selected, then opening or saving the file is very quick. The location of the default directory, whether it is on a local drive or a network drive, makes no difference. Any suggestions as to what the problem might be?
Raphman02
The link that I posted earlier is off. Read this one
http://support.microsoft.com/kb/2501584. I discovered in my network that the MS Office File Validation Patch made excel crawl when opening over the network though nothing else changed. At the time I was opening Excel on Office 2003.
You can manually turn this off by editing the registry and tunring it off. Going forward I skipped the patch to keep my sanity. Not sure if this is the same as your issue, but the support article will go into detail how to either have Fix it
clear the issue or change the proper registry keys.
Hope this helps
Maybe you are looking for
-
I'm interested in theiMac 21.5. Does it come with installed software?
-
Screen become blank during the Manual Target Group creation
Hi SAP, In the Marketing Segmentation, there is an option to allow the manual Target Group creation. I have a list of 5000 BP and I upload it via "Import Business Partner". It is just 5krecords and the screen goes blank. We have tried several times a
-
Unable to edit parameter in cr viewer
Hi All, I have a report having parameter.I selected show in viewer panel as Editable. When I run in cr viewer 2011 But I am unable to edit the parameter value. Please suggest
-
I have sent and received faxes from my HP Photosmart 7510. When trying to send a fax today I get "no connection" "your printer is not connected to the network. please connect and try again." It IS CONNECTED TO THE NETWORK. the apps work-can print f
-
ITunes Library will not play off my laptop
My host music library that is on my Dell laptop is not playing. The music list is there however when I click on the play button, the songs do not start to play. This problem started after I installed the latest version of itunes.