After installing 7 on my iPhone my Safari only works when I am at home near my network

After downloading 7 on my iPhone my Safari only works at my home network
I want to be able to get on Safari everywhere again

I talked to AT&T and Apple. ATT says its the phone and Apple says its not the phone.

Similar Messages

After I installed iOS7.7 on my iphone 4, it only works when plugged in, overheats and plays random music. HELP!!!

My iphone 4 has been acting up since I installed iOS7.1. It only works while it's plugged in, overheats while charging and randomly plays music.HELP!!!

Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
http://support.apple.com/kb/HT1808

Problem with iPhone 5: Wifi Only Works When Close to Wifi Router

I've recently updated my iPhone 5 to iOS 6.0.2. I am actually having a problem with the wifi connection. In which, I can only uses the wifi when I'm close to the wifi router.It seems when I'm further than about 2/3 meters away from the router I get no connection, and then sometimes (not often) I get it and then it goes again.
Any suggestion on how to fix that?
Thanks.

Having exactly the same issue, WiFi on 6.0.1 worked fine for me. Now I have to be sat next to the router. I've tried forgetting the newtworks and joining them again and no joy. I had 4 known networks and none of them work. Will there be an update for this? 6.0.3? Or are we stuck with it?

My iPhone 4 will only work when it's plugged into the wall charger. What can I do ?

Please help.

Hello DaShiaa,
I would be concerned too if my iPhone would not power on unless plugged in. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Does Home Share only work when you are at home? Or once you've shared will the music stay on the computer you've shared it with?

I want to use Home Share to share music in i-Tunes between my desk top and my laptop. Does it work once you're not in the same house?

If you use home sharing to transfer music to your laptop, it stays on the laptop and you can take it anywhere.
Look at Understanding Home Sharing: http://support.apple.com/kb/HT3819 where it says "With Home Sharing, you can stream music and video from one authorized computer to another, or simply drag music between computer libraries. You can also choose to have iTunes automatically import purchases you make on any of your Home Sharing computers to your own library."

Phone receiver only works when using speaker. I can only receive/answer callls using the speaker.

After dropping my phone, the iPhone 5 receiver only works when using speaker. I can only receive/answer callls using the speaker. What to do?

Hi jlk166,
I understand that you are experiencing some issues with your receiver speaker. Here is an article that can help you troubleshoot this issue:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
http://support.apple.com/kb/ts5196
Thanks for using the Apple Support Communities. Have a good one!
-Braden

MOH only works when dial the operator (0)

Hi all,
i`m using cisco cucm-BE with mgcp protocol with the gateways,
In the unity configuration, -->call management-->system call handler-->operator-->edit - transfer call-->standard-->under the transfer action
I choose Transfer call to : Extension and i put 0 and i choose ofcourse supervise transfer, and checked the box for "wait while....".
By doing the above config ,
When someone called form the pstn to the cucm and after he hear the autoattendant:
the MOH only works when i press 0 (the operator) and when i press an internal extension i hear a ring back tone and sometimes i hear the MOH for one second and then the ring back tone played ....... dialing 0 only let me hear the MOH Normally after "wait while i transfer your call"
how i can hear the MOH too after i dial the internal extension normally?
the following is done:
-am using unicast MOH
- that media resource is enabled. Media Resource->MoH Server and verify that the run flag is set to YES.
- Restart the Cisco IP Voice Media Stream App service.
- Check if G711,G729 is enabled for MoH in Service Parameters->Call Manager->Cisco IP Voice Media Stream App service.
- the IP Phones or Gateways has assigned the MRGL that include the MOH resource.
thanks

Brand new iPod 4 just purchased yesterday (Jan 9 2012) and it is running the latest rev of iOS. Seeing the exact same problem. The camera can be accessed from the lock screen and it works. BUT, if I try and access the camera from the icon, I get a black screen.
Apple, is this a hardware or software issue?
Please advise.

HT4623 I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I had the same issue with one of the three iPhones I updated on Wednesday. There are many processes that are working for people including:
- Resetting the device several times
- Toggling the "Dont' Allow Changes" setting under "Restrictions --> Location Services"
- Disabling Restrictions altogether.
- Restoring from backup
I was able to restore location services by selecting "Reset" and choosing "Erase All Content and Settings" to set the phone up as new. When the phone resets and goes through the setup process, I was given the option to turn on location services. I then restored from backup and was good to go.
Some people have been able to resolve the issue by resetting but only using "Reset All Settings" without having to erase all content, but that did not work for me. It took a while to get everything back to normal, but it is good to know that there was a somewhat simple solution.

Email will receive but not send after installing os7 on iPhone 4S

Email will receive but not send after installing os7 on iPhone 4S. Checked all settings against iPad and second 4s phone and they appear identical. Other devices work fine.

Thanks Spaidr,
That was part of it. I did an end-around by setting up an alternate outgoing (send) server which was the same as the primary, identical settings, name, password. I deselected the primary and used only the secondary. Reboot as you suggested and Voila! Something must have been corrupted in the primary.
Thanks and hope this helps others.

How i can stop sharing my contacts with other iphone after installing find my iphone?

After installing find my iphone in other devices my contacts starting sharing with that device. How i can stop that?

The two devices are using the same iCloud ID, hence they are syncing the contacts, as the system is designed to do.
BTY, I'm not sure what your intention was to install the Find My iPhone app, but if you are trying to start that service, the app won't help. It is intended to locate OTHER devices. To start the Find My iPhone service, you do it via the settings.

Unable to install the trial version after the download is completed and Safari cannot open when I click to download again

Unable to install the trial version after the download is completed and Safari cannot open when I click to download again

aviatornilesh,
You may try to restart the Creative Cloud application by quitting and relaunching it.
This may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
or for Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

HT1535 What exactly is stored under "OTHER" on your iPhone that you only see when it's connected to iTunes?

What exactly is stored under "OTHER" on your iPhone that you only see when it's connected to iTunes?

Ok, here is how the story have ended for my iPhone 4S.
I took the phone to the genius bar 500-km far from my town. And they told me to wait 20 mins and then they asked what's wrong with the phone. They first thought the battery is dead. But then they changed the battery with a sure-it's-working-battery. But no luck. And told me that "logic board" has gone (why? -no explanation. it just happens).
And then they checked the warranty and noticed that it was expired 29 days ago (the phone was bought from Chicago and I'm in Europe now). Since it's expired, I'm told that it can't be replaced with no cost. I should pay 200 Euros to get a "new" iPhone 4S (you know what is "new" means, refurbished). Or I could buy a brand-new-iPhone5 for 600 Euros.
I'm not rich person and I decided to go with the refurbished one. So, as summary,
- 13 months iPhone is dead. (~500$)
- a refusrbished phone with 3 months of warranty (200 Euro)
- Lost data (I admit that this is my fault not to care about the backup but after phone is dead, I didn't have any way to save data).
I can say that, if you have too much money, yes, Apple products are worth to buy.

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

HT204053 I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.

I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.

If it really does not work, change your password here https://appleid.apple.com (Manage account) and try to add the account again. I hope it helps.

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
provide solution.

Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
Thanks for the tip,
W

After installing 7 on my iPhone my Safari only works when I am at home near my network

Similar Messages

Maybe you are looking for