After installing a new app my iphone wont start

i installed an app and i was requested to reboot phone, after i accepted the phone was shut down but did not open at all it is stuck with the pineapple picture forever, i left it yesterday all night like this but also nothing, i am trying to backup but the itunes on my desktop didnt recognize it.
please help thanks

Which app?

Similar Messages

  • After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?

    After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?

    The iPhone has a hardware problem - with the battery or something else.
    The iPhone includes a one year warranty. If purchased new in October of 2012, it remains under warranty. Call AppleCare or make an appointment at an Apple Store if there is one nearby.

  • Ipod touch won't work after installing a new app.

    Hi!
    Last night, I decided to install a new "Alarm clock," app and test it out by setting it to ring a minute later- what a BIG mistake, because during the time it was supposed to ring, it made my Ipod touch completely crash instead. For the past few hours all it's been doing is flashing back and forth between my homelock screen (with the "slide to unlock," bar at the bottom) and the Apple logo, with the round 'processing' image infront of it.
    I have tried many different things to get it out of this funk but nothing has worked! I tried resetting the Ipod by holding down the menu and power button, the screen went black temporarily, didn't show the "slide to power off" bar and then just reloaded with the same two flashing images. I tried restoring it, but it wouldn't restore, until I did a special reboot that I read about via online boards- where you have to hold the power + menu buttons for 10 seconds, then release the power button whilst holding just the menu button for 10 seconds- but, whilst the Ipod did go through the whole restoring process thereafter, it didn't manage to sync up.
    Now, not only does my ipod STILL flash back and forth between those two images. I keep getting an error message of (0xE80000001)! I used a different cable to try and sync up, but the blasted thing still won't stop flashing back and forth between those two images, and the ipod is not being recognised by itunes so the ipod keeps beeping, in and out of itunes and won't sync!
    My ipod isn't 'jailbroken,' I haven't touched it's software or altered it in any way, to how it was sold to me. I would've liked to have brought it back the the Apple store to be looked at, but I don't think they'll help me because the top left hand corner of my Ipod is completely missing after my niece dropped it a few months ago- the Ipod still worked (up until I installed the **** alarm app) perfectly well until now!
    Also, I have a mac, so any tips on how to access/help/fix this problem would have to have instructions for a Mac OS not Windows please!
    Many thanks!

    I keep getting an error message of (0xE80000001)!
    Read here.   iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • After installing a new APP and open it, the title "NEW" next to the app name won't disappear

    Hello,
    Two days ago, I just made a clean Windows 8.1 installation.
    Since yesterday evening I have encountered this kind of issue where the title "NEW" next to the app name will just not dissapear after clicking on it.
    How can I solve this problem?
    Thank you for any solutions!

    Hi,
    Based on my research, it may be caused by the registry key corrupted.
    I suggest we try the following command to check if it works.
    1.Open an elevated command prompt: press Win+X, then click Command Prompt(Admin),and press Enter.
    2.At the command prompt, type the following command, and then press ENTER:
    Dism /Online /Cleanup-Image /RestoreHealth
    Meanwhile, please try the following troubleshooter tool to test it.
    Try App troubleshooter:
    http://download.microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
    Regards,
    Kelvin hsu
    TechNet Community Support

  • TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • Camera app doesn't work after installing a new screen

    I have been fixing broken iPhone screens for quite some time now but have never come across something like this. After installing a new screen the camera app won't show the camera and the shutter never opens. I thought I didn't put one of the cables in right so I double checked and sure enough they were in good. I restored the phone and tried it again with no luck. I then switched out to another screen I found and the camera worked perfectly. This is so bizzarre to me but can anyone explain to me what is wrong? Or what has happened? I have never seen anything like this.

    I keep getting an error message of (0xE80000001)!
    Read here.   iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • I can't install my new apps (bigger than 50mb) it just says "Will install" on itunes then it wont sync

    I can't install my new apps (bigger than 50mb) it just says "Will install" on itunes then it wont sync
    I've tried to restart itunes and iphone and log out and in on itunes and nothing happends.
    When I do something on my iphone (move a app or such) the itunes will move it to, but if I move it on itunes it doesn't move on the iphone.
    HELP ME ;_;

    https://discussions.apple.com/message/20480409#20480409
    found that guy that had the same problem but I don't find "add software"
    http://puu.sh/1EgKm

  • I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    JUst experienced the exact  same problem after changing password.Getting same message. Hope someone has an answer for this.

  • Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
    If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
    Select the ipsw file and let it restore.
    If you dont have it downloaded then simply click on restore.
    I hope it works
    Cheers !

  • TS3219 When trying to install a new app on my iPhone 4S, i received a message: "This is not a Test User account. Please create a new account in the Sandbox environment". What does this mean? I cannot update or download any app. Thanks

    When trying to install a new app on my iPhone 4S, i received a message: "This is not a Test User account. Please create a new account in the Sandbox environment". What does this mean? I cannot update or download any app. Thanks

    Common on jailbroken iPhones, not so on non-jailbroken iPhones. Thus, if your phone is not jailbroken, restoring from backup will hopefully fix the issue.

  • Cannot install Apps After installing 5.0 to my iphone

    cannot install any Apps After installing 5.0 to my iphone 
    After installation begins at the and it shoves deleting logo and stays the same. (no Apps installed)
    please heeeeeeelp!!!!!

    You can re-download apps for free : http://support.apple.com/kb/HT2519 . If you download them to your computer's iTunes you could then try restoring to your iTunes backup and see if the apps and their old content/settings get copied over.

  • Why is my computer not installing the new apps that I have purchased on my iPhone?

    My computer didn't install the new apps in the itunes library that I purchased on my iPhone!

    Is Automatic Downloads enabled on your New computer... are you using the Same Apple ID... Is you new computer Authorized...
    Automatic Downloads...
    http://support.apple.com/kb/ht4539
    Also see...
    About authorization and deauthorization

  • Stupid iPad demands security check after confirming install of new app? Why  and can I shut that of somehow  my password should be enough!

    Stupid iPad demands security check questions after confirming install of new app? Why  and can I shut that of somehow  my password should be enough!

    Judging by the number of successful password hack attempts on internet accounts of all types, clearly password security alone is not enough to verify you are the account holder to a dumb computer.
    I'm sure you'd be complaining even more about "stupid iPad" if it allowed anyone who obtained your password easy access without any kind of backup security checks, and spend money on your iTunes / App Store account.
    Apple are actively increasing the security of people's valuable iTunes accounts, not decreasing it. Why would you want to make it easier for someone to steal from you and take over your online accounts?

  • TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

    Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

    Try This...
    Close All Open Apps...  Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • Why has the sound gone all of a sudden after installing the new iOS 5.0.1?

    I have had the iPhone 4s since the time it was released in the uk, u had no problems with it, it's network coverage was pretty good, the loudness of the speakers was good ad the battery would last me an entire day, now after installing the new ios 5.0.1, my sous has gone, I can't hear the music playing, I can't here te clicks and the tap sounds when touching the phone, the only time it makes sound is when I make a call and I can put it on loud speaker, other than that there's no sound coming from te loud speaker, oh yeah Siri seems to be working fine. Do aby of you people know what's wrong and if any of you lot are going through the same problem or any other problems since tbe update to ios5.0.1, apple you need to get this sorted as the speaker is important to some of us if not all and it would be great if you could sort this out and any other problems caused by this update and to allow the phone to work and operate the way it should, thanks!

    Hi Guys,  I FIXED IT!!!!
    I have post eariler on this forum and as you know I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed.  But I need to happily say that I now have the fix!!!!  This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
    Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along.  I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed.  some worked for an hour but then failed.  hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ...  and in paticualar is has to do with your bottom connection.  Your phone is thinking it is docked all the time.
    To fix the no sound problem what you need is...
    1.  a torch
    2.  a tooth brush
    3.  methalated spirits
    4. a butter knife
    Step 1.
    get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed!  everything!  it might look clean but still thats ok go to step 2.
    step 2.
    Turn on your music app and put the speakers on!  If your phone is like mine it should not work.  you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
    step 3.
    Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone.  work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
    (As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
    Step 4.
    Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone.  Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again.  slide it back and forward.  Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
    This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors.  if you have been using dodgy connectors or unapproved apple cables (as I was)  any damage or hair and dirt on the terminal this is effecting it.  Try it.   just remember if you can do something external to your phone then there lies the problem.
    Hope this works for your phone as it did for mine. 
    Cheers

Maybe you are looking for

  • Playing music from iCloud on Macbook Pro without external hard drive

    I have iTunes match set up on my macbook pro. All my music is physically stored on an external hard drive and is perfectly matched to iCloud. So I can stream/download all my music to my iphone and ipad no problem. I would have thought as all my music

  • MAC Mini 10.4.8 update crashed my system

    Yesterday a message popped up on my screen, said I should update to 10.4.8. I did and after rebooting the system locked up in trying to find the mouse/keyboard. I then called Mac support and was told that I would have to buy support contract before t

  • Http receiver adapter - url parameters

    I have a scenario where I'm calling a client proxy and passing a file name to xi.  I have a receiver http adapter configured to post to a servlet.  I want to pass the file name from payload to my query string variable.  i.e PATH = parser/servlet/pars

  • ArcGIS 10.0 to Illustrator (CS5).... Edit, Save, Reopen, Clipping masks are all gone....

    I am working from ArcGIS 10.0 to Illustrator CS5. I make my map in ArcGIS. The layers are in four groups (VECTORS: top, middle, bottom + RASTER). I export the map from layout view to an .ai file. I open the .ai file in illustrator. Edit a couple thin

  • Why does Quicktime wants to install a Dutch version of Quicktime?

    My PC is set up to work in English. Everywhere. I don't like the Dutch versions because a) they contain often more faults b) the language is (to say the least) 100% unsuited for computers. Try explaining on forums that you wanted to 'opslaan' a file