After installing and opening a program it says it´s a Trial
I´ve installed Adobe Creative Cloud on a new computer. After opening Acrobat reader the Trial window opened_30 days. A 1 year licence was purchased.
Already on my portable, i´ve been having troubles_it´s to be the 2nd user. At the time of considering the purchase, our retailer said it was ok to get the trial version.
In order to activate Adobe Creative Cloud, and since the trial period is over, I´ve disinstalled & reinstalled Adobe Creative Cloud.
But, I can´t use any of the programs because it says my Trial period is over & a Serial number is necessary.
What I am doing wrong?
hi salvador88, in the same trial window at the bottom you will find a button "license this software" just click on that button and sign in with your adobe id and password the subscription will be activated.
thanks
Kapil
Similar Messages
-
when I install the program, all go good but when i open the program, it say: iTunes was not installed correctly, Please reinstall Itunes Error 7 (windows 193), After i do this but the same
Howdy Allux345.
After multiple installations of iTunes it can be frustrating when the issue isnt resolved. I was able to locate the following knowledge base article that specifically addresses the "Error 7" you are recieving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
The Resolution section has different steps depending on what version of the Windows Operating System you're using. Since it can be a bad installation of these Windows files, pay close attention to the instructions on repairing if the file already exhists.
Thanks for reaching out to Apple Support Communities with your question.
Cheers,
Pedro D. -
I have an active subscription but everytime I open the program it says trial expired. I have installed, reinstalled, and installed again. I have also installed the windows registry patch.
It wouldn't install for nearly 5 times I tried to do this. Now it's finally installed again but it won't budge past the trial version. I click BUY NOW but then it says "error you already have a subscription" then it times out and just stays on the Trial Expired page.Hey kushlar,
Please log out from your Adobe application and login again.
Once you launch Acrobat and get error saying trial expired, you will find an option saying 'license this software'.
Select this option and enter your credentials.
Now check and let me know.
Regards,
Anubha -
I Just installed Crative Cloud Lightroom try-version but when i open the program it say "An error occurred when attempting to change modules." ?
Try giving permission to Lightroom folder under
/Users/[user name]/Library/Application Support/Adobe
Steps
Click on Finder and on the menu bar ( top side the of the screen) click on Go > Go to,folder
In the window type exactly ~/Library and click on Go
Open Application Support > Adobe and right click on Lightroom folder and select get info
Under sharing and permission Click on lock and unlock it
Click on + add your current user name and administrator if not added
Then give Read and Write permission for Admin, system, everyone and (your user name)
Click on gear icon and choose apply to enclosed item
Then Click on Lock
Launch Lightroom and check. -
Register Applications photoshop CC Lightroom 300 baht per month Creative Cloud desktop install and load the program into Lightroom down normally open normally, but the work load photoshop program installed. Open access Like we use it to fill a 30-day trial version, serial no.
1) WHAT if I juse JUST ONE Adobe program pretty often?
They have a single use subscription for $20/mo. Similar to upgrading extended version every 1.5 years.
2) WHAT if I created projects like 2 months ago and I didn't use Photoshop for a full month. Who assures us that with the CC series the projects are opened with the old CS ones?Or don't use it every day?
Same problem if you own it. If upgrade price is $400 every 1.5 year that is same as $16/month. You can choose not to update and version will be same as when you last used it.
3) WHAT if I don't use Adobe 24/7? and 5) Making an day-based subscription?? Same problem if you own it. If upgrade price is $400 every 1.5 year that is same as $16/month.
4) Adobe, do you think to be the only one making these softwares?
Competition is always a factor in market.
6) After all this mess, you discriminate Europeans, too?
Taxes charged by Governments and municipalities are not controlled by Adobe. -
I can't Install my updates on my mac book , it starts to install and a box pops up saying i don't have permission to install
So, then, after you click the Install button you receive the permissions error dialog? Again, are you logged into an Admin account?
Have you tried:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Also, please check the settings on your startup drive. Select it. Press COMMAND-I to open the Get Info window, then open the bottom-most panel and check the settings. They should look like this: -
Installing and Unistalling downloaded programs
Hi, I'm new to mac and don't know where to begin when it comes to installing and unistalling downloaded programs correctly. Please help. Many thanks.
Hi, carpi.
Installing applications
Generally, packaged commercial software is distributed on CDs or via downloads and includes installation instructions that should be readily obvious.
Many of the shareware and freeware applications you will download are distributed in disk images, files with the .dmg extension. A disk image is a virtual hard drive in a single file.
Double-clicking the .dmg file mounts the disk image, like mounting a drive, and opens a new Finder window showing its contents.
On your desktop, an unmounted disk image appears as follows:
Whereas a mounted disk image might look like this:
If you download a disk image containing an application, double-click the disk image file, then examine the Finder window that opens. Usually it will contain:• A "Read Me" file that tells you how to install the app, uninstall the app, get support, etc. If there's a "Read Me" or "Read Me First" document, be sure to read that first.
• One of the following:• The application, as a single icon. This is known as a bundle. It contains all the files associated with the application in a folder that is also the application's icon. One drags-and-drops these to the Macintosh HD > Applications folder to install the app and make it available to all user accounts on your Macv. If you want the application available to only your account, drag-and-drop it to your Home > Applications folder. If you do not have a Home > Applications folder, simply create such a folder.
• An installer package for the application. If it uses the Mac OS X Installer, the installer package looks like a cardboard box containing objects. One double-clicks normally this to install the application.• Other files the developer decided to include, sometimes icon that are actually hyperlinks to their Web site, etc.After you've installed the application, you can eject the mounted disk image by any of the following means:• Dragging its icon to the Trash. This ejects the mounted disk image: it does not Trash it.
• Control-click the mounted disk image's icon and select Eject from the resulting contextual menu.
• Click the Eject button next to the mounted disk image's icon in the Finder's Sidebar.
• Launch Disk Utility (in the Applications > Utilities folder), select the mounted disk image in the left column, then click Eject on the Disk Utility toolbar.After you have ejected the mounted disk image, you can trash the unmounted disk image, i.e. the .dmg file you downloaded.
You can learn more about disk images by reviewing these files from Mac Help (Finder > Help > Mac Help) and Disk Utility Help.
Uninstalling Applications
See my "Uninstalling applications" FAQ for important advice on uninstalling software.
Learning more...
You wrote: "I'm new to mac"Since you've "new to Mac," my "Learning About Mac OS X" FAQ has a number of resources that you will find helpful including books, online trainging, and more. Educating yourself about Mac OS X will significantly speed your transition from Windows and is easier than the "trial and error" method.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
my macbook is loaded with microsoft word for macs and every time I try and open the program I get an error reading and it will not open. This is what it says:
The application Microsof Word quit eunexpectedly. Powerpoint and the other applications still respond!The joys of Microsoft!
Maybe the preferences file is corrupted. You should be able to find the Word preferences file in the folder:
your user name/Library/Preferences
Its name is com.microsoft.Word.plist
I suggest you drag this another folder and try Word again.
If that doesn't work then you might find clearing the cache files will fix the problem. You can do this manually but I never bother. Instead I use a program like Snow Leopard Cache Cleaner (shareware) or Onyx (free). These programs do lots of other maintenance jobs so it's worth having at least one of them.
Bob -
im trying to install and i get a message saying
"an error occured during the installation of assembly 'Microsoft. VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b9a1e18e3b ",processorArchitecture="x86"" . Please refer to Help and Support for more infomation. HRESULT: 0x800736B3These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
i can not get itunes to install and open on my new laptop i am so frustrated i uninstalled and reinstalled at least a dozen times in the last month
i got a error 7 this time but have had diff ones befpre please helpWill iTunes open in safe mode? Hold down CTRL+SHIFT as, or immediately after, you click the icon that starts iTunes and keep holding until you see this prompt.
Click Continue.
Assuming iTunes has opened, enable the menu bar, if necessary, with CTRL+B. Then go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Press OK, close iTunes, wait until it has had a chance to fully close then reopen.
Will iTunes open normally now?
If not, see Troubleshooting issues with iTunes for Windows updates for genral advice.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
tt2
Message was edited by: turingtest2 -
Cd burning issue after installing and updating snow leopard
After installing and updating snow leapard to the latest version, the cd burner for i-tunes quit working. it says" burning disk initializing" then "burning disk finishing" comes up with the error "the attempt to burn a disk failed. the disc drive didn't respond properly and can't recover or retry. Any suggestions to fix this problem?
First try other disks, brand new, then try another brand, then consider backup user files and (clean and polish then) c booting off the 10.6.3 disk and simply reinstalling OS X then updating to 10.6.8 again.
Hopefully this should fix the issue in OS X software, you may have to reinstall certain third party software again that it's kext files got kicked out of OS X by the reinstall.
If you get hung booting at any time, simply hold the shift key down and then update your software then reboot normally -
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5
Check if this helps. http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
~ Arpit -
Can anyone help me? When i try to download minecraft and open it up, it says that it gets damaged and it won't work. I have the Macbook Pro with Retina display
Hi AMD2, This worked for me
https://discussions.apple.com/thread/3241273?start=15&tstart=0 -
I have downloaded adobe premier pro cs4 to my mac book pro. How do I now install and open it?
I have downloaded adobe premier pro cs4 to my mac book pro. I have the serial number. I purchased it in 2010. I have a new system and I want to transfer the license to this system. how do i now install and open it?
Sounds like you've downloaded the OS X version of the game, which won't run on iOS devices. You need either this version <https://itunes.apple.com/us/app/angry-birds-star-wars/id557137623?mt=8> or this version <https://itunes.apple.com/us/app/angry-birds-star-wars-free/id578915438?mt=8> for your iPod Touch.
The versions for iPad are <https://itunes.apple.com/us/app/angry-birds-star-wars-hd/id557138109?mt=8> and <https://itunes.apple.com/us/app/angry-birds-star-wars-hd-free/id578909807?mt=8>.
Remember, all apps for your iPad or iPod Touch must be purchased through the iTunes App Store. You can do this directly on the devices by tapping App Store and searching for what you want.
Maybe you are looking for
-
Cursor style setting... Urgent please help...
Hi, I'll have to set the cursor style to a wait_cursor on click on a toolbar button which would open a dialog. The dialog takes sometime to open as it has to fetch data from the database and display. Here is the code snippet which I have.. // get the
-
How to use MAX() function with date field
Hi Frzz, I have created a Graphical calculation view in which i have multiple records for each employee with different dates. But my requirement is to take the records which have maximum date. I have converted the date into Integer and applied the MA
-
Single click on alv calls details in another alv
i have one alv where i can display main data. after i mak a click on the line in the alv i want to see ather details according to the first alv in a second alv. is that possible?
-
I have windows 7 and have tried the troubleshooting steps but am still unable to connect to the itunes store yet my PC is connected to the internet, it just keeps looking like its trying to access the store
-
Mac Pro 5,1 Start up disk preference Internal bootable backup
Hi, I have a Mac Pro 5,1 running yosemite. My OS is installed on a PCIe SSD and I am trying to make a bootable backup of the OS to an internal HDD in one of the standard HD bays. No matter how I make the backup (time machine or chrono sync), once a b