After installing Appl. Server, there are no EWA Data in Solution Manager

Hello,
my satelite system send the ewa to the solution manager. After installing a second appl. server for the satelite system, there are no data show in the ewa on the solution manager.
In the logfile from the sdccn on the satelite system, you could see that the data was send.
Transfer of session data completed to destination...
On the satelite system i can see, that the ewa contain some data. But in the solution manager the ewa is empty...
Any suggestions ??
Regards
Ronald
Edited by: Ronald Negendank on Mar 23, 2010 11:50 AM

Hello Amber,
sorry for late. I delete the service definiton on both side (solman and satelite system). I rescheduled the tasks and the data was send successfully.
This is a part of the LOG from send the session data
25.03.2010     16:42:09     Transfer of session data completed to destination XXXXX
25.03.2010     16:42:09      > transfer completed
25.03.2010     16:42:09      > transfer for server XXXX completed
25.03.2010     16:42:09     > transferring 000031 functions, 0000144878 bytes, RFC block size = 0000320000 for server
25.03.2010     16:42:09      > transfer for server XXXXX started
25.03.2010     16:42:09      > transfer for server XXXXX completed
25.03.2010     16:42:07     > transferring 000197 functions, 0001771754 bytes, RFC block size = 0000320000 for server
25.03.2010     16:42:07      > transfer for server XXXXX started
25.03.2010     16:42:06      > transfer data to mapped session ID 0000008719 200 destination XXXXXXXXX
25.03.2010     16:42:06     Transfer of session data started to destination XXXXXXX
But the EWA in the solution manager is still empty...
Regards
Ronald
Edited by: Ronald Negendank on Mar 26, 2010 11:51 AM

Similar Messages

On iOS 7.0.2, after web (OTA) installation there are two icons for the app on the home screen; one is invalid.

Hello,
I have filed a bugreport, but I am curious if anybody else has noticed this.
Summary:
Icon that was displaying progress of installation stays on screen next to normal icon and it is impossible to delete it or start the app with it.
Steps to Reproduce:
1. Full factory reset of iPhone with iOS 7.0.2
2. Open web page with link for OTA installation.
3. After install is finished there are two icons for the app.
Expected Results:
Icon that was displaying the progress should disappear after installation.
Actual Results:
Icon that was displaying the progress stays on screen is not usable and cannot be deleted.
Version:
7.0.2
Notes:
Configuration:
Server used to serve the page with installation files is "Server" app on MacBook Pro with Mountain Lion.
The same happens if other servers are used; Ubuntu 12.04 LTS.

Hello,
I have the same problem!
Any idea?
Thanks.

RDL Reports are not working after installing SQL Server 2012 Service Pack 2 in the SharePoint integration Mode

I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
inside SharePoint and Document Libraries.
But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message.
The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.

Hi Hedayat-Abedijoo,
According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
According to my search, there may be two reasons for the problem:
This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
in IIS instead of through SharePoint (using the approved method).
This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
If you have any questions, please feel free to let me know.
Thanks,
Wendy Fu

I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

Hi
I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

On the iPhone tap Settings > iCloud
Switch Contacts off then back on then reset the device.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

After installing HTTP server..

Hi all,
After installing http server on linux in a diffrent oracle home. My Enterprise manager dbconsole is not starting I am getting following error. Please help me.
$ tail -10 emdctl.trc
2006-10-30 16:20:52 Thread-4136076976 ERROR http: snmehl_allocateListenerPort: f
ailed to bind socket: Address already in use (errno=98)
2006-10-30 16:20:52 Thread-4136076976 ERROR http: nmehl_startHttpListener: faile
d to listen to HTTP port for http://localhost:3938/emd/main
2006-10-30 16:20:52 Thread-4136076976 ERROR main: nmehl_startHttpListener failed
starting http listener
[oracle@localhost log]$ tail -1 emdctl.trc
2006-10-30 16:24:06 Thread-4136560304 WARN http: snmehl_connect: connect failed
to (xxxx:1158): Connection refused (error = 111)
[oracle@localhost log]$ tail -10 emdb.nohup
----- Mon Oct 30 16:21:22 2006::Restarting DBConsole. -----
----- Mon Oct 30 16:21:22 2006::Console Launched with PID 21394 at time Mon Oct
30 16:21:22 2006 -----
06/10/30 16:21:25 Error starting ORMI-Server. Unable to bind socket: Address al
ready in use
----- Mon Oct 30 16:22:53 2006::EMAgent exited at Mon Oct 30 16:22:53 2006 with
return value 55. -----
----- Mon Oct 30 16:22:53 2006::EMAgent has exited due to initialization failure
----- Mon Oct 30 16:22:53 2006::Stopping other components. -----
----- Mon Oct 30 16:22:53 2006::EMWD Stopping DBConsole. -----
--- DBConsole internal stop. No OC4J admin passwd hence hard stop. ---
----- Mon Oct 30 16:22:53 2006::Commiting Process death. -----
----- Mon Oct 30 16:22:53 2006::Exiting watchdog loop -----
An other issue is the http server is not starting and getting following error.
/app/oracle/product/10.2.0/companion/Apache/Apache/bin/httpd: error while loadin
g shared libraries: libdb.so.2: cannot open shared object file: No such file or
directory
Thanks,
Message was edited by:
james@

James,
The key parts in that output are -
2006-10-30 16:20:52 Thread-4136076976 ERROR http: snmehl_allocateListenerPort: f
ailed to bind socket: Address already in use (errno=98)
2006-10-30 16:20:52 Thread-4136076976 ERROR http: nmehl_startHttpListener: faile
d to listen to HTTP port for http://localhost:3938/emd/mainThey are telling you that it could not bind to that particular port number (port 3938) because something else is already bound to it.
Try (as root) -
/usr/bin/lsof -i TCP:3938which should show you information about the process(es) that are currently listening on that port.
As for -
/app/oracle/product/10.2.0/companion/Apache/Apache/bin/httpd: error while loadin
g shared libraries: libdb.so.2: cannot open shared object file: No such file or
directorylibdb is a prerequisite of installing the Apache server, I believe you can get the library as part of the Berkeley DB installation/rpm's/packages (it should be listed in the installation document).
Hope this helps.

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
Since you're new to iPad ...
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

Hi i can not install itune. There are the error show " Could not open key: Unknown\Components\32A7D634EB632D11CABB00087CCFBB48\DAEC106DF4E2BBB458CC2CA9C46 E3A0C.

Hi,
i can not install itune. There are the error show
" Could not open key: Unknown\Components\32A7D634EB632D11CABB00087CCFBB48\DAEC106DF4E2BBB458CC2CA9C46 E3A0C. Verify that you have sufficient access to that key. or contact your support personal.
I have tried some soution from the similar case to uninstall itune and also related components already but finally the probelm still occured.
Please you help to suggest me what can i do? I need to restore my back up data to the new iphone as the previous one got stolen.
BR,
Sirorath A.

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

After installing Lion Server computer asks to wipe HD and re-install Lion

After installing Lion Server 10.7.3 and restarting, I am forced to erase HD and do a complete Lion 10.7?

After installing Lion Server 10.7.3 and restarting, I am forced to erase HD and do a complete Lion 10.7?

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

I have a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder app. There are also no "calendar" and "add an event" bottons on the Calendar App. Why?

I just bought a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder App. There are also no "calendar" and "add an event" buttons on the Calendar App. Why? Is there a way to add either a reminder or an event?

For the reminders app - just tap on an open space on the ruled paper window under the heading in order to create a new reminder. Or tap on the + sign in the upper right corner of the app. You do not have the + sign on the app?
For the calendars app to go Settings>iCloud>Calendars>On. Toggle the setting on and off and the + sign should appear in the lower right corner of the calendars app. Tap the + sign to create a new event.

Which parameters are required for generating a solution manager key?

Hello All,
I generated a key in Solution Manager, to install a SAP NW 2004s SR1.
But I receive an error during the installation from the SAPINST:
"SAP Solution manager key for the instance number... is invalid ".
I already changed the parameters for generating the key, changed the instance number, hostname, but I still receive the same error.
Could someone tell me which parameters exactly are required for generating a solution manager key?
thanks
Thomas

Dear Sri,
this is exactly what I have entered, I still get the same error message.
My entries in SAPINST:
SAPinst founds one system instance on the host with
the Instance number 00,
the Instance name SCS00.
And ask for the Central Instance parameters:
there I enter 01 for the central Instance number,
the hostname
and the solution manager key generated for the instance number 01!
best regards
Thomas

EWA Configuration in Solution Manager 7.1 in SP08

Hi All,
Could any one please advice on the Changes that has been taken place for EWA configuration in Solution Manager 7.1.
Warm Regards,
Sudhakar G

Hi
In addition to above also check below wiki link
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
and below as well
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
I assume you have done post setup etc
Regards
Prakhar

Windows 8 crashes after installing Apple drivers

Due to an electrical storm, I had a 2 partition drive fail. The Mac partition was corrupted, the Windows 8 (via BootCamp) install was fine. However, I couldn't reformat (or even mount) OS X so decided to reinstall both OSes on their own physical drives within a Mac Pro. Mountain Lion restored from a Time Machine backup and I got Windows 8 up and running, via BootCamp, on the other drive. All seemed well until I went to install the Apple drivers/software where upon my restart from the install I got the BSoD. No matter what I do or how many times I restart, it continuously crashes. Curiously, two randomly spouted errors are offered...
KERNEL_SECURITY_CHECK_FAILURE
and
IQRL_NOT_LESS_OR_EQUAL
The problem seems to be with the Apple drivers. I used the updated BootCamp 5 software. However, I also used BootCamp 4 software after restoring Windows 8 to a clean install, that set of drivers doing exactly what BC5 did. I've stripped my settings back down to initial install, even reformatted the physical drive, re-partitioned via BootCamp and reinstalled Win8. While working correctly, I set up my account, redownloaded apps I installed from Windows Store, restarted to finish those installations; still, the only issue seems to be when I install the Apple offered drivers. I would just not use them but with many of my peripherals being Apple products it's more of a hassle than I care to deal with. And, I had it all working before with no problem. What's wrong this time? Below I list some concerns...
Is there any difference between installing a BootCamp/Win8 partition on a startup drive or another internal harddrive? Once, BootCamp had to be installed on the startup disk.
Is there any way to install just certain drivers from Apple's software pack since best I can find from MS's site is that the errors seem to be one or two driver incompatibilities?
I've installed Win8 updates prior to and after running Apple's software... would this affect the installation of that software either way or system integrity in Win8?
The above are the only two error messages I've seen. Why do they alternate? Is there more than one issue needing to be addressed?
It all worked before, could it be the software offered now? I've tried BootCamp 4, 5; should I try a lower numbered driver set?

My apologies for not following up on this topic.
Yes, I found a fix for my issue. It involved the Time Machine backup drive I had installed.
I reinstalled OS X and Win 8 onto the same drive and experimented pulling drives out of the Mac Pro. However, I never removed the Time Machine drive alone, only took the three extra drives out at the same time so I did not which one was causing the crash. It didn't seem to matter which bay it was in, it was the backup itself that Win 8 didn't work with. My Time Machine backup goes back for over a year so I wasn't interested in starting all over so I removed it from the Mac and installed it in an external enclosure. HOWEVER, if this drive is connected and on while booting up in Win 8 the OS will still crash. Within the Mac, it was impossible to keep the backup from mounting. In the external, I have to remember to disconnect when I switch OSes. Not a fix really, but a solid workaround.
If someone wanted to set up a new backup perhaps that would fix the issue completely. Perhaps it's because OS X/startup disk was restored from the backup and the backup have the same data, maybe it's an issue with data on the backup disk and Windows 8. I don't know. But several times, while switching the OSes I have forgotten to disconnect the now external backup and Win 8 crashes; if I remember to disconnect no issues at all.

After installing Appl. Server, there are no EWA Data in Solution Manager

Similar Messages

Maybe you are looking for