After Installing Bitdefender 2011 Firefox is very slow and worse when multiple tabs are open

Firefox performs very poorly after I installed Bitdefender 2011. There was no such problem with Bitdefender 2009. When multiple tabs are open, switching between them is not possible until tab contents are completed.

As ninjafox says, the problem seems to be the BitDefender Anti-phishing Toolbar. Disabling this through Tools -> Add-ons and restarting Firefox seems to fix the problem for that session. However, the problem then reappears when the computer is restarted, presumably because BitDefender re-enables the toolbar.
Another way of disabling all add-ons when starting Firefox is to hold down Shift while clicking on the icon (Windows only I think - at least doesn't work on Ubuntu for me).

Similar Messages

Even after enabling "Warn me when closing multiple tabs", firefox closes without any warning even if multiple tabs are open.

I recently installed Firefox 4.0 and in the options, under the section "Tabs", I have enabled "Warn me when closing multiple tabs". But if I have multiple tabs opened with websites loaded in them, and then try to close the browser, it simply closes. No warnings are shown (which was there in previous versions). Couple of times I clicked on the close button of browser and then realized that I had some important sites opened in different tabs, which I lost as it didn't warn me. Can you please let me know whether this is a bug or a mistake from my side?

I'm sure you are using Private Browsing mode in Firefox 4. I have also the same problem and I tried to uncheck this option after many times accessing about:config\browser.warnOnquit. And it's wonderful, the warning cameback. I think it's a bug about Private Browsing mode. Hope Mozilla's Developers will fix it.

Firefox is crashing when multiple tabs are open

I have used Firefox for years but have never had so much trouble as I am having in the last few days. Constant crashing when I have multiple tabs open. I used to be able to have as many as a dozen tabs open. Now if I have as few as 3, crash after crash after crash after crash. On both my laptop and PC. I have run all my antivirus and nothing is coming up there. Anyone know what the heck is going on?

See http://kb.mozillazine.org/Firefox_crashes and [[Firefox crashes]]
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx).
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
You can open the <i>about:crashes</i> page via the location bar, just like you open a website.
See: http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter) and [[Mozilla Crash Reporter|Mozilla Crash Reporter: Breakpad]]
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r22
* Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

After installing maverick my computer is very slow

after installing maverick my computer is very slow, what can I do?

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

After update to Lion Numbers became very slow and clumsy.

After update to Lion, Numbers works very slow and clumsy. Any solution to fix this problem?

Don't know about being "slow" - I've always felt it was slow. I could run Office XP (maybe 2000 - not sure) on an 133 mhz Pentium and it was faster than Numbers on my late 2008 Aluminum MB.
But I've had other issues under Lion with it. It seems whenever I first go to my spreadsheets after the computer has been asleep - even if it is some time after waking it up - and start to enter some numbers, I'll get a beep and see that what I tried to type didn't come out right and I have to do it again.
I was wondering if it was something to do with the auto-save versions maybe kicking in when I first start to enter info, but before I finish the first entry.

Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips. Later it stops rendering on every restart and the machine was normal and faster. Now it keeps crushing on every restart

My Final Cut X changed behaviour after conneting the external monitor via HDMI. Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips after every restart. Later the dual screen icon disapeared on the top of my screen and it stops rendering on every restart like before and the machine was normal and faster. Now Final Cut won't start anymore whenever I start it loads and crushes immediately on every restart.

Upgrade FCPX

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

Firefox crashes when i clear recent history if multiple tabs are open, is anyone else experiencing this?

Firefox crashes (hangs, requires me to force close, and then doesn't actually clear the history) when i clear recent history if multiple tabs are open, i do this so i only lose the history and can maintain the tabs i want for the next session.
I have always done this in Versions 3 without an issue, since moving to Version 4 it happens semi regularly. the more tabs i have open the higher the likelyhood of an error
is anyone else experiencing this?
Windows 7 pro sp1
firefox 4
addons: no script, adblock, pterodactl, imagezoom, reddit reveal, java, tinyeye, better privacy.

This happens to me too. OS winXP home.

I installed the update and now my firefox is very slow and mixing up everything I press on the online college web site I have been using just fine since Feb. Now it won't download the stuff I need and turns the pages white. Help

Firefox is extremely slow and I am having trouble opening my college web site.

Firefox is extremely slow and I am having trouble opening my college web site.

GT70 internet very slow and sluggish when waking from sleep

My GT70 sometimes is very slow and sluggish to respond when it is awoken from sleep mode. Browsers become unresponsive (hyperlinks don't register as links and require multiple clicks to respond) and internet gets very slow. Speedtest.net reports .50-3mb/s when it is usually 24mb/s and above. The hdd also thrashes about and won't calm down for what seems like an eternity.
This only happens when opening the lid after the machine sits idle for several hours. This is fixed by restarting the machine.
Does anyone know why this laptop would be behaving like this? it is very frustrating and makes sleep mode pretty much useless.
cheers,
-deluxxe

Quote from: darkhawk on 22-November-13, 13:17:05
First thing I would do is get CPU-Z and open that after wake-up and seeing if the CPU is running at the speed expected, or if it's stuck at some lower speed.
thanks for the reply. will try that next time it happens.

After installing lion my macpro is very slow

After installing lion my Macv pro became very slow. takes long time to start ad to shoot down. Is there any fix for this?

Lion does best when you do a clean install on a new drive, then use Setup or Migration Assistants.
You're going to have to show / ask what old stuff you carried over from before most likely.
Then again, people complained when Snow Leopard came out. And before that there was...
To say it starts and shutdown more slowly is the surface superficial and doesn't say how installed, what, even the model Mac Pro and how it is configured.
You are going to want to use Safe Mode and Lion Recovery and backups for starters most likely.
reset SMC For "Mac wont' turn on or boot" and related
https://support.apple.com/kb/TS1367
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Identifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems: Apple Hardware Test
General Mac maintenance: Tips to keep your Mac in top form

After installing Snow Leopard, Mail became very slow contacting provider

With Leopard, our Mail on different Macs where very quick to contact the provider. You know what I mean, not sending or receiving the messages, I mean the connection procedure at the beginning. With Snow Leopard this procedure became very slow. Never understood why

HI,
Launch Mac Mail.
From the Menu Bar, click Mail/Preferences.
Make note of your preferences then locate this file.
com.apple.Mail.plist
Move that file to the Trash and restart your Mac.
Also, try repairing disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
And try Mac OS X - Maintenance
Carolyn
Message was edited by: Carolyn Samit

After installing lion, my computer is running slower and having delays connecting to network

please help me resolve my problem. after installing lion my system was running great for about a week. suddenly it is having trouble connecting to the internet, running slow and the history pages are appearing without asking for them.. unable to get my homepage when opening up, just get a white screen. if i go to the history, i can get the homepage. Only able to access my homepage by waiting for ever or getting it from the history.
please help

Peter, thank you for responding. No, I am not referring to the initial start up. I downloaded Yosemite over a week ago and feel it is running very slow when switching websites. Also, I have experienced numerous hangups causing me to force quite much more than before.
I just cleared my Safari history (I am guessing that is what you meant by "clean the old internet-caches" and restarted Safari. I will see how it goes.
I uses a file called "Desktop" from my IPhoto library for my desktop pictures. It contains about 20 pictures. I configured it that way in Preferences, but it seems whenever I shut down and restart my computer it reverts to the generic picture of Yosemite. As for the question mark and "Update Needed" showing on my startup log in screen, I think I fixed that by changing my password in Preferences.
No that I have cleared the Safari history, I will see how things go.

After software update macbook pro works very slow and no applications will open

Updated software today, since software updated macbook is running really really slow (approx. 4 mins from pushing the power button to home screen) and no applications including itunes will work. Anyone any ideas???

kBirr wrote:
Tried this, to no avail, applications (itunes, pages, iphoto) still won't open & MacBook still running very slow
thanks anyway
Did you restart your computer after repairing permissions?
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Your system info says:
MacBook Pro
Yet, in your postings you say: "MacBook" which is an entirely different computer. Typo? Are you in the correct community area?

After Installing Bitdefender 2011 Firefox is very slow and worse when multiple tabs are open

Similar Messages

Maybe you are looking for