After installing Dreamweaver CC Trial it will not launch.

After successfully install the Trial for Dreamweaver CC it does not open when launched. The application seems to start to open and the exits without any error message.
I'm running on a Mac mini (Late 2012) running Yosemite (10.10.3).

Please refer to the help document below:
CC applications close immediately after launch
Regards,
Pattie

Similar Messages

After installing Maverick, my downloaded movies will not play in Quick Time. It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete." What can I do?

After installing Maverick, my downloaded movies will not play in Quick Time. I receive the following error message:
You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete. So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
Well I did find a way to delete it, by going into the various components and one by one deleting it. Now I reinstall it and the message is that this Quick Time is for an earlier version before Maverick 7. SMH....Now what.?

Hello, terrygav.
I would recommend processing a reinstall of Mavericks.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason H.

After installing Exchange cu6 2 servers will not autostart

after installing Exchange CU6 - 2 services will NOT autostart
Transport Submission & Unified Messaging
Both will start if I goto Services & Manually start these
(Unified Messaging - I think that was an option on the initial install but I'm not using unified messaging anyway!)
any ideas how to find out why and fix it ?
ChrisS

Hi
They are probably dependant on other services, try delaying the startup of these services and see. I have it with one of my servers as well but since CU2. if i set the services to delayed then they start correctly.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

After installing recent java update, computer will not sleep.

After installing the recent java, daylight savings, and the security update. my computer will not sleep. Does anyone else have this problem? I do have an adaptec usb2 card installed but nothing is plugged into it. Also i don't have any Ipods or external things plugged in. I have had the same setup for the past year with no problems, now it will not sleep. I have also tried repairing the permissions. Please help

A number of sleep-related issues can appear after incremental Mac OSX updates, including the inability to properly go to sleep, problems waking from sleep, and having your display go to sleep without your Mac going to sleep. The most common culprit is Bluetooth. Try these tips to fix your sleep problems.
WAKE UP
In System Preferences>Bluetooth, uncheck Allow Bluetooth Devices To Wake This Computer. If you are using a Bluetooth mouse and keyboard, you'll have to wake your Mac by pressing the power button.
FILE CORRUPTION
Your Bluetooth preference file may be corrupt-you'll need to delete it. Turn Bluetooth off, then go to the /Users/user name/Library/Preferences folder. Look for a file called com.apple.Bluetooth.plist and trash it.The OS will create a new preference file when you enable Bluetooth again.
ENERGY SAVER
If you have issues with a Mac or display that goes to sleep at inappropriate times, you may have a problem with Energy Saver. Delete the following .plist files and restart:
-/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
-/Users/username/Library/Preferences/com.apple.systemuiserver.plist--
(username is your name or System Administrators name)
-/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.
Some, in these forums, have had luck fixing sleep issues downloading the Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
Yours would be the 10.4.8 Combo update. Others reading, download the combo update that applies to you!
Cheers!
DALE

After installing update itune 10.5 will not open or run on windows 7 pc keeps telling me error 7 126 and that AVFoundationCF.dll failed to load. reinstall.I have done the complete 6part unistall 10 times now and each time I get the same thing anyone have

So I installed the latest update of Itune on my Windows 7 Ultimate 64 bit PC.( the previous versions worked fine never a problem)
It installs, and comes up with error7 126. Reinstall program again.
So I go through all six steps to unistall, and reinstall a frsh downloaded compy of 64 bit Itune from Apple Site. and reinstall again and again, went through this process 10 times still having same problem, including now also comes up with AVFoundationCF.dll missing, try to install that won't install.
So now I can not use anything apple, iteunes, safari, update etc, nothing will work, which means I can no lobger sync or update my Iphone 4S.
Does anyone have an answer for me????

I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.

After installing new update, my itunes will not open and it says to reinstall it. I did this two or three times and it still won't open. HELP!!!!!!

After installing the new iTunes update (10.5, if that's the newest update)
when i try to open iTunes, an error message pops up that says
iTunes.exe - Entry Point Not Found
"The procedure entry point
kCMByteStreamNotification_AvailableLengthChanged could not be
located in the dynamic link library CoreMedia.dll."
When I click OK, another message pops up saying
"iTunes was not installed correctly. Please reinstall iTunes."
"Error 7 (Windows Error 127)
I tried reinstalling it several times and the same thing keeps happening.
WHAT DO I DO?!!!
Please help!
Thanks!

Followed the steps in http://support.apple.com/kb/HT1925?viewlocale=en_US then downloaded and it worked.

After installing an update my iMac will not start

I have an old iMac purchased in Feb '06 Intel 2 GHz 20" . It serves some basic needs and I enjoy the machine. Recently I was notifyed of an available update from Apple and I downloaded it and installed it. The machine now comes up to a white screen with the Apple logo in the center and a spinning pinwheel beneath. I have attempted to force it to a recovery disk, safe mode and disk manager at startup with no results. I then inserted the installation disk and started it with the same results. It will not eject the disk.
I would love to know if there is something else I can do here before taking it into the Apple Geniius.
Thanks Jerry

Paul, thanks for your suggestions. Regrettably, none of these procedures helped my problem. Interestingly I just installed the same update on my 3 year old iMac and that same screen came on and remained for an unusual amount of time. It took an excessive amount of time to finally come back with running apps in place. A recent update on my MacBook Air went on briskly. I'm not sure what any of that means but there it is. By the way - I let the old iMac run with that startup screen for over an hour thinking it may just be old and needs more time. Being older myself, I felt it couldn't hurt.
Thanks. I am not sure what the Genius Bar can do but it seems that is my next move unless someone comes up with a magic bullet out here.
Jerry H

After installing, premiere pro 2.0 will not open

I have adobe premiere pro 2.0. I wanted to use it on my new asus laptop. However it told me I needed to activate it but since premiere pro 2.0 is so old the website had told me to download the one with a new serial number to which I did. Now after installing, the programs begins to open but doesn't, what should I do?

The one with the new serial number is CS2.
Is this where you downloaded it from?
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Which operating system? Win 8.1?

After installing new RAM module macbook will not wake without re-start

Im having a little problem with my macbook. It operates normally and the new RAM appears to function as normal except when the computer is in sleep mode, it appears to sleep as normal but when the lid is raised or the power button depressed to wake the system up it will not do so without a full re-start. Any help is much appreciated. I have tried re-setting the PRAM and performing the usual maintenance functions from OnyX.
Thank you.

Did replacing the RAM fix the problem? I am also experiencing the same issue. The RAM works great when the computer is running but occasionally I cannot get the computer out of sleep mode and must reset the entire machine. Is the only cause of this a bad stick of RAM?

After installing Safari andAdobe fireworks CS4 will not open

I recently purchased the new Mac OS X Snow Leopard and I cant get my Adobe Fireworks CS4 and Safari browser to open. I downloaded safari 5 today thinking that might help my browser but nothing. When I click the Safari icon, it shows it is running and then there but no actually page pulls up. Any ideas what is going on?

I have been working on this since I posted. The error messaged popped up several times during automatic updates the past couple of days. When I first had the opportunity to update, I selected both iTunes and Quicktime. I received a message iTunes was updated, but there was an error updating Quicktime. I cannot remember the exact message, but it basically said to install the update manually from within Quicktime. I did not do that until I figured out what was going on with iTunes. Anyway, I finally updated Quicktime manually, and after rebooting, I was able to open both Quicktime and iTunes. When I finish working tonight, I will reboot and hopefully, be able to open both again. As of now, iTunes is working. Thanks.

After installing version 3.66 Firefox will not let my users update to a newer version

Every few months I go around to the office PCs where my users have normal guest rights (so they can not install applications). I log in as an Administrator and update programs as needed, including Firefox to the latest version (3.66). I've done this for years and Firefox always updates for them when they are logged in with their basic user rights. After I installed this version, everyone is getting an error that "there is an update available, but you do not have permission to install it". How can I fix this so the browser will update again for all my users.
== This happened ==
A few times a week
== I logged is Administrator on all the office PC's and upgraded everyone to version 3.66

Try following the steps detailed at [[Updates reported when running newest version]]

After installing Yosemite, my Photoshop cs5 will not open. Says its experienced an unrecoverable issue. Any ideas?

Anybody know why photoshop won't open afetr installing Yosemite?

Yes. Yosemite's installers breaks Photoshop CS5 installs. You will need to reinstall and update. If a message pops up requiring Java, get it from this link: Java for OS X 2014-001
Gene

Contact info to reset activation for old version of Dreamweaver CS3. I deactivated old installation from another system and installed on new system but will not launch to allow reactivation.

Does phone support exist? Customer service? The airspeed velocity of an un-laiden Swallow?

Thanks everybody… I killed the process again in Task manager after trying compatibility modes… noticed something glaring at me as I killed the process. 32 bit. Old workstation on Win7 that was working was 32 bit and the Win8.1 is (drumroll please) 64 bit. MY guess is that if Adobe killed the ability for this to run it would have failed upon an attempt to activate, not upon launch. I think Nancy might have hit it on the head. Let me stew on this for a bit if I really want to pay more for features I already paid for once.
Mark J Laurence, MCSE, CET
Electrical Designer / Network Administrator
Marquess & Associates, Inc

After installing windows updates, new tabs will not open, either on toolbar, ctl t or under file

it will open a new window. Only known on laptop because windows up completely crashed my desktop. Computer hell.

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Phone will not turn on after installing new updates?, phone will not turn on after installing new updates?

my iphone asked if i wanted to update it. i selected yes.. then about 10 mins later it shut off. thats been 3 hours ago and now it wont turn on. ive only had it for a week. what do i do??
ive tried charging it and i pluged it in to my computer.. i help down the power button. nothing seems to work.

1. Charge with the AC adapotor for at least 30 minutes.
2. Reset the phone: press both the home and power buttons for up t0 1 minutes, releasing when the Apple logo appears

After installing Dreamweaver CC Trial it will not launch.

Similar Messages

Maybe you are looking for