After installing dw cc 2014 the program doesn't open?

how can I solve it?

Hi delciiobruno,
Please follow the below steps and see if your issue gets resolve.
1.       Uninstall Dreamweaver CC 2014 and Do check the “Remove Preferences” check box at the time of uninstall
2.      Launch “Creative Cloud” desktop application and click on gear icon on top right
3.       Go to preferences -> Account -> sign out from creative cloud app and quit
4.     Again launch Creative Cloud application and login using Adobe Id
5.     Switch to "Apps" tab and locate and install “Dreamweaver CC 2014”
6.       Launch Dreamweaver CC 2014
Revert back if your issue persists with information Jon has asked for.

Similar Messages

After updating itunes, the program doesn't open anymore- audioconfigeration

hi!
after i updated my itunes some days ago, the program does not open anymore. there is just a message saying, that itunes cannot start, because it has discovered a problem with my audioconfigeration (i don't know if this is the right word for it, because the message is in german "Audiokonfiguration").
i'm so desperate. i tried to repair the program, but the problem is still there. i'm afraid to reinstall it, because of my songs (are they gone then?)...
regards,
green123

(i don't know if this is the right word for it, because the message is in german "Audiokonfiguration").
that one is typically caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
(the German version of this document is still calling this the -200 error ... which is how it used to present to folks using iTunes 7.0.0.70 and 7.0.1.8.)

CS6 installed, but half of the programs won't open, and give me a "Bad Image" error message

3 days ago I installed CS6, opened Premiere once without problem, now it gives me an error titled 'Adobe Premiere Pro.exe - Bad Image' :
C:\Windows\system32\MSVCP100.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
After that, I removed CS6 completly from my computer, and reinstalled it, after I scanned for virussus. Still the error message appears.
I use Windows 7.

Cheers! That worked!
First it told me I had a newer version of MSVC 2010. So I removed it, installed it again, rebooted my computer, and after that installed CS6 and now it works. Thank you very much!

I opened iphoto and the top bar says its open, but the program doesn't open on the screen. Can you please me?

This is super frustrating, and I'm afraid of losing my photos! Can someone please help me out! Also this is iPhoto '09 not '08.

Greetings,
Can you still go to the menus at the top and click on things or is the program unresponsive?
If the menus work then go to Window > Zoom.
If that doesn't help:
1.) Remove the following to the trash, restart the computer:
Your User > Library > Preferences > com.apple.iphoto (there may be more than one, remove them all)
Your User > Library > Caches > com.apple.iphoto and / or just iphoto
Cheers.

Time machine only mounts the drive to Finder. The Program doesn't open. What is missing here?

Selecting <Time Machine> <enter time machine> on my Mac Air brings up a dialogue <connecting to backup disk>. The disk appears <mounted> on the desktop as a icon and shows as a connected drive in Finder. It doesnt open into the Time Machine interface that I expect and which used to work. Is there a simple fix here?

Sorry, you have lost me.
If you open AirPort Utility and click the Disks tab, what do you see there?
Next to Partitions, you should see "Data" which is the default name of the Time Capsule drive.....or.....if you have renamed "Data", you will see the name that you have assigned to the drive. In the example below, I have renamed "Data" to read "Backups".
Are you saying that you made previous backups at one time to the drive, then changed the name of the drive?

HT204382 I've gone through the process of installing Flip4Mac WMV, but the program will not open. When I try to open a torrent file to play, it tells me it can't be opened because a required codec isn't available. What am I doing wrong?

It originally told me that I didn't have the required codec, so that's why I downloaded flip4mac. It's still giving me that message, and Flip4mac won't open at all. Quicktime won't open either. It shows up in the dock but won't open. Can anyone help?

There are a number of Windows Media codecs that have never been ported to Mac, and the copy protection system also has never been ported. So it's quite possible that whatever this file is you downloaded, you will never be able to play it in Mac OS X. Without knowing what the file is, however, it's not possible to be certain.
Regards.

Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

Hi Barbara,
Try Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc.

Uninstalled Itunes and now I get message 'Thank you for downloading Itunes' when I try to install. But the program doesn't install. Any ideas?

Uninstalled Itunes and now I get message 'Thank you for downloading Itunes' when I try to install. But the program doesn't install. Any ideas?

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Photoshop elements 13 will not initialize after the program has been opened

Photoshop Elements 13 will not initialize after the program has been opened once. If I remove Elements processes from task manager, Organizer will open I am using Windows 7 and Elements 12 is also installed on the same computer.

the password and licensing agreement are needed for installation, not to run.
check your install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

After installing Quicktime CD-ROM/DVD drive doesn't work.

We use Quicktime to view files created by agencies. After installing Quicktime 7.1 the CD-ROM/DVD drive on the IBM thinkpad no longer works.
error - This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
The only way to resolve this issue is to edit the registry and remove the Upper and Lower filters.
Why does this happen? Can you please let me know if this will be amended soon, and is there a way of installing the software to stop this from happening?
IBM Thinkpad Windows 2000

Last night I had the same problem. Tried to upgrade and got the version with Itunes to see what it was. After reboot, Both physical drives and a vertual drive now have the yellow mark. This program should not have touched device drivers. Uninstalled both quicktime and Itunes and rebooted. Same thing. Reinstalled Quicktime. Same thing. Ran reg mechanic. it said 2 dlls where missing:
PxSFS.DLL
pxwma.dll
These don't seem to be device drivers, so should not have had an effect, but I replaced them which made reg mechanic happy. Problem is still there.
In Event viewer for application I now have this error at each reboot:
The description for Event ID ( 0 ) in Source ( IDriverT ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Service started.
For System Event I have this at each reboot because the cdroms are disabled:
The Cdralw2k service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
Looking through this thread it looks like just other users replying. Where is Apple? they created this mess.

After update LR 5.4, the program will not import new pictures

After update of LR 5.4 on my laptop, I cannot import any new pictures anymore.
I did the same update on my desktop and there it was no problem at all.
Does anyone know how to solve this problem??

I am importing from a verbatim ssd, and I just don't get the chance to choose an import, I don't see any pictures to choose from. Ans what ever I pick it won't work
On my desktop it was no problem at all. But my laptop gives my trouble.
I do not have any error messages
Verstuurd vanaf mijn iPad
Op 21 jun. 2014 om 20:42 heeft "ssprengel" <[email protected]> het volgende geschreven:
after update LR 5.4, the program will not import new pictures
created by ssprengel in Photoshop Lightroom - View the full discussion
Where are you importing from? What type of Import (Copy, Move, Add)? What is the destination specified at the righthand side?
Any error messages?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6482328#6482328
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have a MBP Retina and in the office I use it with a Monitor Sony LMD-2450W connected through AMD Port to VGA. After installing 10.9.2 the resolution in the monitor has been downsized to 4:3 (and 1280x960) instead of its 16:9 display. Anyone know how to

I have a MBP Retina LCD (resolution 2880x1800) and in the office I use it with a Monitor Sony LMD-2450W connected by VGA. After installing 10.9.2 the resolution in the monitor has been downsized to 4:3 (and 1280x960) instead of its 16:9 display. Anyone know how can I change the resolution manually?
Display shows only 3 different resolution if I choose "scaled" but none use the full area of the monitor.
Thank you
Marco

This has been an ongoing problem with external monitors that predates 10.9.2. I wrote various tips on different methods here, though the best is probably the hot corner one:
http://applehelpwriter.com/2014/01/25/how-to-correct-the-external-monitor-resolu tion/
(note: this links to my own personal website and is not endorsed by apple in anyway)

After installing Lion my printer Epson LBP5050n doesn't work anymore. Cannot find a printer driver

after installing Lion my printer Epson LBP5050n doesn't work anymore. Cannot find a printer driver.

Well then you could download the Epson Printer Driver package for Lion. This will add all the Epson printers in that list.

After installing dw cc 2014 the program doesn't open?

Similar Messages

Maybe you are looking for