After installing Exchange cu6 2 servers will not autostart

after installing Exchange CU6 - 2 services will NOT autostart
Transport Submission & Unified Messaging
Both will start if I goto Services & Manually start these
(Unified Messaging - I think that was an option on the initial install but I'm not using unified messaging anyway!)
any ideas how to find out why and fix it ?
ChrisS

Hi
They are probably dependant on other services, try delaying the startup of these services and see. I have it with one of my servers as well but since CU2. if i set the services to delayed then they start correctly.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

After installing Mountain Lion, contacts will not sync

After installing Mountain Lion, contacts will not sync to iphone 3G

I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

HT4623 after installing ios7 my Iphone4 will not work

after installing ios7 my Iphone4 will not work

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

After installing Firefox6 many sites will not finish loading. I click on "stop loading this page" and then click on "reload this page" and the page loads. Also if I disable javascript the page will load.

After installing Firefox 6 MANY web site will not finish loading. I disabled all add-ons and still have the problem. If I disable javascript, the pages will load. When the page is trying to load, if I hit "stop loading this page" and then hit "reload this page", the page will load; but sometimes I have to do this 2-3 times for the page to finish loading. No problem with these pages using IE8.

I see that you ave changed some network.http prefs. 
Doing that can cause all kinds of problems because not all servers like such changes, so you can try to reset those prefs on the about:config page. 
network.http.max-connections 48 
network.http.max-connections-per-server 16 
network.http.max-persistent-connections-per-proxy 16 
network.http.max-persistent-connections-per-server 8 
network.http.pipelining true 
network.http.pipelining.firstrequest true 
network.http.pipelining.maxrequests 8 
network.http.proxy.pipelining true 
network.http.request.max-start-delay 0 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

After install when starting photoshop will not load so I can enter serial number

after installing photoshop cs3 on windows 7 when I start photoshop it will not load so I can enter serial number. why?

iOS devices cannnot be tracked or located with just the serial number. Unless you shared your Apple ID and password with anyone, then your account cannot be accessed at the iTunes Store.
Reporting a lost or stolen Apple product
To be on the safe side, change your Apple ID password ASAP > Support - Apple ID
Read here > Apple ID: Tips for protecting the security of your account

Curve 9300 , after installing upgrade 6.0 will not reboot

Hello, after installing an update the curve 9300 will not reboot, i removed the battery many times and same thing. what should i do now? i tried installing the new 6.0 bundle update using my laptop.

I had bad malfunction after installing update to 9300. I had to take it back to O2 who were great and replaced it with a brand new 9300 as the first one could not be repaired. It was the upgrade that caused problem, it was fine B4 that.
MalQum

Problem after installing 6.03 iTunes- Will not start up...please help!!!!!

I recently gave into the decision of installing the new iTunes update to 6.03 Everything was working fine, but I thought I should upgrade. Now I cannot start iTunes. When I click on the icon it shows an hourglass for about 2 seconds and then goes away. Ive tried reinstalling, but to no avail. If anybody knows what to do it'd be GREATLY appreciated. Thanks for all of your support! J

I am also having a problem opening iTunes after installing the latest version, 6.03. Every now and then, it will open after I do some troubleshooting, but the problem persists the next time I try to open it. Once I opened iTunes in safe mode and then restarted in the normal mode and iTunes started properly. Another time, I took off the iTunes Help application from my start up items under my account and I was able to open iTunes. Another time, I opened iTunes from the actual data file and I was able to open iTunes. But as soon as I close iTunes and try to open it up again the next time around, it does not respond. What is going on? How can I get rid of 6.03 and go back to the previous version without losing my music?

After installing Lion my keyboard will not work at all and it will not recognize my wi-fi connection at times. Any ideas for a solution to this problem?

It will not let me type anything now and the wi-fi connection is not recognized at times! Please help!! This only happened after I downloaded Lion.

Now that you have restored it to Apple software, we can help - no kidding.
If WiFi is grayed out (tap Settings first) then you will not be able to select WiFi. See this article: http://support.apple.com/kb/TS1559
If you can select WiFi, your touch will then detect WiFi networks that are within range. Networks that are protected by encryption will display with a closed lock. Open networks will have an open lock. Networks are displayed by strongest signal to weakest signal.
Closed/locked networks require a password or WEP key to join. Open networks often require that you agree to terms and conditions for that network. This usually occurs with a Safari-like screen that appears 15-30 seconds after you tap on the network. Until you go through that screen, it might look like you are connected but you are not.
Spend some time going through the basic WiFi troubleshooting guide: httpL//support.apple.com/kb/TS1398

After installing mavericks, the iMac will not wake from sleep properly (at all)

I've upgraded to 10.9 (late 2012 21" iMac), and I notice in the morning when the iMac has been sleeping overnight, it will not wake up,
During the day, if it sleeps for a few hours, it seems fine, and wakes normally, prompting me to type my password,
In the morning however, I hit a key (on my wireless keyboard), and the display wakes up, I get a dark grey screen, and see the loading circle (not the beachball) in the middle, and see the cursor for a few seconds, before it then disappears, and reappears.
This cycle repeats itself,
The 'fix' is to do a forced shutdown by holding the powwer button until it shuts down, and then restart.
Anyone else find this problem/find a solution?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

After installing 10.6.8 will not boot even from 10.6 disk HELP

Will only start in safe mode, Safari crashes so no help there to get back to 10.6.7 and will not boot from my 10.6 SL disk. HELP! Can't find the orignal disks so I am in a bad way...

Call AppleCare and request replacement discs. You can also Zap the PRAM and Reset the SMC and see if those will fix things up. You updated to 10.6.8 w/o having a bootable backup/clone or Time Machine backup? Bad move, that.

After installing 4.0 firefox will not load from short cut or program

ckicking ico or program will not load. reinstall 4.0 works but when closed it will not reopen.

Do you get any error messages?
Make sure that Firefox closes properly and that there isn't a hanging Firefox or plugin-container process left in the task manager.
*http://kb.mozillazine.org/Kill_application
Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
-----

After installing mountain lion facebook will not load on iMac

Any helpers Please !!

I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

After installing Lion all Adobe products not working will and to slow

After installing Lion all Adobe products not working will and to slow
Like the photoshop is to slow to work on it
Please I need to now what's the problem and how can I solve it
Best regards

Yeah Im at a loss too for what is going On here I Do Audio video Editing On the PC side till Now Just got a Not even 6 mo old Mac book pro Dual core 2.5 Ghz 17 in 160 Gb HD 2 GB Ramm did fresh reinstalled of tiger Patched to 10.4.11 then asked the tech at apple store best way to go for Installing my Adobe CS3.3 Master Suite for windows on Here As I said I did not want to go with Lepord as well as I do not use vista yet on PC side with my audio video Apps Abelton live 7.0 Reason 4 Pro tools 7.4 M powered Avid media Composer 3.0 and everything Adobe Makes now he says 2 ways to go VM fusion Or Parallels He likes the Parallels I go that route I install it realize to make Adobe suite work I have too do a custom Virtual machine with 1.5 GB ramm instead of default 512 MB and I create virtual HD at 60 GB instead of default 32 GB which The first time i Installed the master Collection at the 32 GB setting I think it ran out of disk space on the install so i increased the VM to the current settings went to Adobe to Parallels site and Got updates and windows and apple removal tools and ran them here goes reinstall # 3 it takes about 1 1/2 Hrs then at end give ya the error 19-20 errors and when you go look into the folders in Program files adobe there are no Icon launch files and in your programs tab under adobe suite all you see is 2 icons that do not launch anything ? any help is greatly appreciated new to Macs Like them but a lil discouraged !!!!

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

After installing Exchange cu6 2 servers will not autostart

Similar Messages

Maybe you are looking for