After installing gpu freezes on press esc to start windows

i installed a nvidia geforce gtx 760 and after starting my computer a screen just said press esc to start windows. after pushing esc nothing happens.

Steven, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

After installing Mountain Lion, my iTunes app wont start, why ???

After installing Mountain Lion, my iTunes app wont start, why ??? It bounces in the dock, then "Unexpectedly Quirs"

Let's keep it simple...
1) Make a new user - the steps are in http://support.apple.com/kb/HT1199
2) Log into that user, open iTunes, agree, etc. - it will probably work
3) If it does, it tells us that iTunes (the program) is fine but it's encountering something unexpected
4) Go back to your user, and try to open iTunes while holding option and making a new library - like suggested in http://support.apple.com/kb/HT1589
5) Your iTunes will be empty. This is ok. Your files are not touched by this process.
6) If iTunes doesn't quit when loading an empty library, you could try rebuilding the iTunes Library as Apple documents in http://support.apple.com/kb/HT1451
7) If iTunes does quit, it could be trying to grab something - like photo information to sync to your iPad - and that's where it finds the unexpected data. Maybe try moving the iPod Photo Cache? http://support.apple.com/kb/TS1324 should guide you for how to do that.
If you tell us whether it is library-specific, user-specific, or system-wide (happens in both users), we could maybe give you better advice on what's going on.'
If the new user has the same behavior, maybe remove the SC Info folder - there are not many system-wide files iTunes touches. http://support.apple.com/kb/TS1389 covers how to remove that invisible folder.
iTunes uses /Applications/iTunes.app, /Users/Shared/SC Info, ~/Music/iTunes/ and ~/Library/Preferences/ and a bunch of other files. I don't think focusing on /Applications/iTunes/app or other system-wide files is going to be as effective as knowing whether the issue is system-wide or user-specific.
I hope this helps and feel free to reply if this is all confusing.

Cannot open iTunes after installing Lion.Says it is trying to restore windows and quit unexpectedly

Cannot open itunes after installing Lion. Says trying to restore windows and then quits

same
Message was edited by: Ben123212321

Kdcom.dll error after installing NI-DAQmx 7.5/8.5 on Windows XP Pro

We are trying to switch from including a fully computer drawer in our product to just using a SBC (Single Board Computer). In the past we have used Pentium 4 boards with the NI-DAQmx 7.5 suite and had no problem. The current board we are testing useds the Intel 855GME GMCH chipset with a 1.0 GHz Celeron M Processor. After installing the software and I am prompted to restart, and upon restart a notorious Windows blue screen of death comes up saying that there was an error error with kdcom.dll. (exact error below)
A
problem has been detected and windows has been shut down to prevent
damage to your computer.Stop:
0x0000007E (0xc0000010,0xFAFF2A0,0xF7A16344,0xF7A16040)
kdcom.dll
– Address F7AFF2A0 base at F7AFF000, Datestamp 3b7d8346
I have installed both DAQmx 7.5 and 8.5 getting the same results with both. I have tried to disable all of the onboard functionalities of the board (video, ethernet, sound) and still I have gotten this same error. (Note: I have done default installs as well as full studio installs)
Has anybody seen this error before and knows what is causing/how to stop it?
Is it quite possible that the NI-DAQmx 7.5/8.5 software/drivers are just not compatible with this SBC?
Here is a link to info/specs about board that I am having trouble with: WinSystems EBC-855
Thanks

Hi,
I'm not sure that this is a DAQmx related issue. A Google search reveals that kdcom.dll is a Windows dll - what leads you to believe that DAQmx is involved? I'm not a Windows supporter, but there do appear to be a few discussions in that search with issues very similar to yours - did you try replacing that dll? As long as your computer is an x86 architecture and/or on a supported OS, DAQmx should be able to run on that machine. You may want to hit up WinSystem's support to see what they have to say from the computer side.
Hope this helps, please don't hesitate to post back if DAQmx is the culprit or if you have any additional questions.
Cheers,
Andrew S
National Instruments
Getting Started with NI-DAQmx
Measurement Fundamentals

Not able to register with listener after installing oracle grid infrastrtcure in oracle 11gr2 on windows

Hi Guru's.
I am not able to get listener connectivity after installing Oracle 11gr2 Grid infrastructure on windows on vmware workstation. I register with static ip.
Even i recreated the listener and running the listener from Grid home.
The output what i am getting is :--
C:\> lsnrctl status
The listener support no services
Can you please help me out

C:\Users\Administrator>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
C:\Users\Administrator>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                26-NOV-2013 09:09:24
Uptime                    0 days 0 hr. 0 min. 4 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Users\Administrator>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:31
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                26-NOV-2013 09:09:24
Uptime                    0 days 0 hr. 0 min. 8 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Users\Administrator>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:13:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "+asm" has 1 instance(s).
Instance "+asm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: WIN-0P8BCA3R7V5, pid: 2560>
         (ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=49246))
The command completed successfully

After installing Win7 x32 SP1 I can not start Firefox. Not even in safe mode. I uninstalled Firefox and re-installed the program. Won't start.

After installing SP1 Firefox quit working and Internet Explore quit working. I can only use Chrome as a browser at this time.

See:
*http://kb.mozillazine.org/Browser_will_not_start_up
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

After System recovery all the installed apps are not their EXAMPLE Getting Started Windows 8

I did a factory restore w/ HP tech. giveing me the advice to do so. I have a HP Pavillion 17 notebook. came installed w/ Windows 8 after a few months I upgraded to 8.1 Now after restore Im running 8 My problem is after this re-start I did not get all my factory installed apps. EXAMPLE Getting started Windows 8 and others. Desktop Icons also did not populate except trash quick start icon thats it Please help THE HP TECS I HAVE SPOKE WITH apx. 8 HOURS in 3 days time are very hard to UNDERSTAND AS IM SPEAKING TO THESE GUYS IN INDIA india. tHEY ALL HAVE GAVE ME DIFFERENT ADVICE AND HAVE CAUSED ME TO HAVE MORE PROBLEMS WITH MY SYSTEM THAN I DID IN THE BEGINNING.

Hi @Justriden
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I get a black screen after installing the bootcamp drivers on my newly created windows partition?

I am attempting to install windows 7 on my mid 2007 core 2 extreme iMac. I open bootcamp and do all of the steps except the usb flash drive drivers from apple because the server always fails to load. After restarting, I install windows 7 to the bootcamp partition, and the screen goes black during the "Completing Installation." I wait about an hour before shutting down and rebooting into my Mac partition. I use paragon ntfs for mac and go to the drivers folder and delete the atikmdag.sys file and restart. Booting into the windows partition, I get the error that says "Windows installation has failed because the system unexpectedly restarted. Click ok to restart and redo installation" or something along those lines. Instead of pressing ok, I press shift+f10 and open regedit. After opening regedit, I go into some registry file for the setup (I don't remember where this is located, although I can find it if needed), and I change a value from 3 to 1. After doing this and restarting, It boots regularly with a super low res screen but it boots without problem. I go to the apple website and download the appropriate bootcamp support software and install on my windows partition. After restarting, the screen is black again. I assume this is another video driver problem again because the black screen seems to always be video driver problems; however, its odd that the bootcamp support software would give me an incorrect video driver as it is directly from apple. Would this be the problem or does anyone know a fix? Any help is appreciated.
Cheers,
Adam

If you bought your RAM at a place that also sells PC RAM you may have gotten mislabelled RAM. PCs can handle different RAM speeds so they’ll often label higher speed RAM as a lower speed rather than make two different speeds of RAM. But Macs are much more picky. They require a RAM stick to be exactly 667mhz not 675mhz or 800mhz. The way to tell is to put one of your old RAM sticks in and it will force the new RAM to run at the correct speed.
This is from one review of PNY RAM:
"These modules are actually 800Mhz. PNY no longer makes or sells 667Mhz modules. Not all computers that require 667Mhz are compatible with 2 800Mhz modules. They refuse to down clock properly. This is especially true with a number of Core 2 Duo MacBooks. Spoke to PNY support, they flat out told me that yes, they sell 800Mhz modules in 667Mhz packaging. If you RMA a module that is 667Mhz (or supposed to be 667Mhz) they will replace it with an 800Mhz module as they no longer have any 667Mhz SODIMMs, not even for RMA replacement!"
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.

I can't run Itunes! After installing Itunes, I receive a message saying that Windows could not verify Apple's digital signature and it closes.

Pls HELP me! I can"t install it Itunes on any of my computers. After downloading it ( Run now or Saving it) it will no run because I keep receiving a message saying that Windows can not open this file because it could not verify Apple's Digital Signature. I have changed my internet security settings to allow downloads from unverified websites but it will not allow me to run Itunes. I had an older version of Itunes so I tried to install the update and it wouldn't work because so the same message about not being able to verify the digital signature. I uninstalled Itunes and Quicktime and all other Apple programs on my system. Then I tried to download it again... no luck the same message came up again. I then went to my other computer that NEVER HAD ANY APPLE software on it and tried to download Itunes. It gave me the same message. Please help me, I'm going crazy tring to figure this out.

I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Good luck. Worked for me back up and running.

Problem after installing BI Publisher MS word Plug in 2010, Windows OS 7, BI Pub version 11.1.1.5

Hi,
OS:- Windows 7
Bi Publisher :- 11.1.1.5
Microsoft Office Version:- 2010
I had downloaded the template builder for word from the home page of the BI Publisher.
I installed the template builder for word by running as administrator.
After the installation i tried to enable BI publisher menu in the Microsoft word document. it displays as "BUTTON1" and "BUTTON2"
Can you please help on this?
Is BI pub 11.1.1.5 version is compatible with MS office 2010?
Is there any new release updates to solve this issue?
Regards,
Paramesh

The BI Publisher Desktop tool allows you to access your BI Publisher Enterprise server from your client PC. It does not provide any means to directly connect to your database.
A basic installation of BI Publisher Enterprise shall be accessible via eg. http://appserver.mycompany.com:9704/xmlpserver and you can access it using the seeded credentials being Administrator / Administrator. You should use the same URL and credentials for the Template Builder add-in from MS Word.
More information is available in our documentation:
[Creating an RTF Template Using the Template Builder for Word|http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T518230T518233.htm#4512010]

After installing trial version the program does not start

Hi everybody,
I installed the CS 5.5 Trial on Windows 7. Everything was ok, so I started InDesign and said accept to the License Agreement. But the program does not start, the license window always opens again after clicking accept. Can anybody help me?
Thanks!

Make sure to run with full administrative privileges the first time you launch the progrrams. Otherwise the licensing stuff will not be able to kick in and verify our trial period.
Mylenium

T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP

I just reinstalled a T60 from scratch TWICE to the point of updating - Intel Wireless Wifi Link for Windows XP -
Just after that very latest Update (3.1.1.1 or so?) there is no WLAN possible and I had to find out, that a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
I have a full backup done by acronis 2010 so that does not bother me so very much.
The point is that I like to WARN everybody to install that Update to their T60 e.g. 2008YWJ !!!
(contains 3945AGB WLAN Module!)
After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature
szAppName: AcSvc.exe szAppVer: 5.6.1.33 szModName: PfMgrApi.dll
szModVer : 13.0.0.2 offset: 000d4912
and the System wants to report that stuff to MicroSoft...again and again...every time u
start AccessConnections.
U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
and REinstall it....just 2 get the same messages and NO WLAN anymore.
I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
automagically...;-(((
And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
(I could not use that Thinkvantage-System Recovery because it did not even get all its updates by the
time the system went in limbo during install! What i defintely can say is that it breaks at exactely
same point when Intel Wifi Updates is installed...
I do my Acronis Restore now and try 2 avoid this Update....;-(
if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and NEVER
experienced problems like this in many years!
cheers
GAL9000

gal9000, welcome to the forum,
have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

After installing a new app my iphone wont start

i installed an app and i was requested to reboot phone, after i accepted the phone was shut down but did not open at all it is stuck with the pineapple picture forever, i left it yesterday all night like this but also nothing, i am trying to backup but the itunes on my desktop didnt recognize it.
please help thanks

Which app?

After installing lms 3.2 Deamon manager couldnt start

Hi All
I'm installing LMS 3.2 trial version on Windows 2008. I could not start
CiscoWorks Deamon Manager services. (I'm getting the error 1053: The service
did not response to the start or control request in a timely fashion)
I s this due to the trial version or the OS problem?
Regards
mashraf

See https://supportforums.cisco.com/message/675893#675893 .

After Installing Acrobat X Standard, Cannot print from another Windows Program

I am having a strange problem. Once I installed Acrobat X Standard, another Windows based program stopped printing. It now comes up with a usp10.dll error, but most of the time it just crashes the program. Tried reinstalling the program and no luck. The error points at a Helvetica Font being the culprit that was installed with Acrobat. I am not sure how to clear this up.
Thanks

I have not removed it. One of the things I did try was going into the Registry and to FontSubstitutions and change the Helv to Helv,186 or something like that.

After installing gpu freezes on press esc to start windows

Similar Messages

Maybe you are looking for