After installing Illustrator CC, an update cannot be applied ERROR: U44M1I210
This error when tryng to apply an update:
Update failed: Unable to extract the downloaded files. Press retry to download again.
Thanks,
Juan Dent
This does not work. There are no erros in the log file.
Upon installing Premiere Pro CC, I got the same problem - installed okm but not accepting updates.
Could this be a security issue?
Where can we download the patches since the Creative Cloud Desktop is useless?
Thanks,
Juan
Similar Messages
-
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
After installing the latest ipod update some of my purchased songs no longer play
After installing the latest ipod update some of my purchased songs no longer play (though they still play on the computer). When I tested it on another computer it claimed that computer was not authroied to play these songs even though I was just playing them directly off the ipod. Even more strange is that I alos have a number of songs loaded on my itunes from albums I loaded and I am fairly sure these songs were ones I recorded rather than purchased but now they appear on my purchased list.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
After installing 10.7.2 update the OS does not boot. I tried to recover from recovery hd disk but after 3 attempts I am still not able to download lion! Any thoughts????
Try the Lion Community, and bookmark the notebook community (this is not).
You will probably need to provide others with more information too.
Cloned backup? TimeMachine? using Disk Utilityh to repair Lion from the recovery partition (comnand r on startup) -
After installing the last software update, my printer (an Epson Stylus Photo R1800) immediately ceased to function. How do I fix this?
Try resetting the printing system.
Reset Printing System
Network printer or attached to the computer? -
Problems shutting down after installing 10.5.3 update?
Has anyone had any problems shutting down there IMac's after installing 10.5.3 update? I've tried shutting down twice and the image that appears when shutting down seems to go in an endless loop an doesn't shut down.
Can you restart from the menu and hold the shift key down, until the Mac
boots in a SafeBoot login screen; then choose Disk Utility (shortcut under
GO in Finder window, to Utilities folder) and run 'repair disk permissions'
then restart the computer normally...(?)
You may also have to consider starting the computer from the OS X
installer disc and choose from an option menu there (not to install)
and choose to use Disk Utility from the booted installer disc, to run
'repair disk' from there? You could also run 'repair disk permissions'
while booted from that installer disc, but maybe you'd still have to
repair those from the running system for best effect once it is back
running from the hard drive's system.
Some minor issues can happen after an update, usually just repairing
disk permissions before installing the update, and/or running up in
SafeBoot, can help. There are other things to try and do, if these don't
help that much. The state of the system prior to an update is important;
since an update can't fix anything otherwise non-related to an update.
Maintenance issues aside, after you repair disk permissions, safeboot,
and restart, if there still is an issue, you could try to download the Combo
OSX 10.5.3 update file and install it over your system; and then repair
disk permissions again after it finally restarts normally.
Was the 10.5.3 update a smaller (delta) file or was it the Combo (large) file?
Good luck & happy computing! -
On Mac - Android File Transfer stopped working. It says Unable to connect after installing the Verizon Software Update Utility from phone.
Hi JoeC695,
That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
Thanks,
PamelaF_VZW
Tweet us vzwsupport -
Low Signal Strneght after installing 6.0.2 update
Hi,
I am recieving low signal strneght after installing 6.0.2 update.Any fixes ? or anybodyOops I meant cellular w/o the data.
You can try doing a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up.
if that doesn't help then try - settings - general - reset - reset network settings.
if that doesn't help, then contact your phone carrier and see if they can help. -
Unable to access media card after install of 10 software update
After installing the software 10 update, i'm not able to access the media card from the phone or when plugged in to the laptop. from the phone settings menu, i cant choose to save any file into the media card - its grayed out. Everything was working fine until I installed the update. Is this a common problem? did the update wipe out all the media card contents?
Have you tried removing the media card and re-inserting it?
-
No startup after installing illustrator?
HI,
I just downloaded illustrator on my MAC (OSX 10.6.8), but it will not startup. I tried a several times without succes. Then I uninstalled it and did the installation again. But it still doesn't work.What's wrong?
<Removed by Moderator>Great ! Problem solved! Thanks!!!!
isabelle
Op 13-mei-2014, om 10:51 heeft Sanjay Kumar het volgende geschreven:
no startup after installing illustrator?
created by Sanjay Kumar in Illustrator - View the full discussion
Hello,
Can you please check if verdana fonts,(all four variants i.e. regular, bold, italic and bold italic) are present and enabled.
Sanjay
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6378017#6378017
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
HT6114 fans on full bore after installing 10.9.2 update. fix?
fans on full bore after installing 10.9.2 update. fix?
Same here. I've reset pram, smc, checked for any CPU intensive apps, bought new battery, even opened case and blew dust out of fans. Was going to do a heat sink clean but another thread brought up the idea of Mavericks being the culprit. I hadn't thought of it before but I'm starting to think it has to do with Mavericks.
MacBook Pro (late 2008) -
after installing yosemite, tried to update apps but an old apple id is shown with no way to edit. how can i update apps wait my current app;e id and password?
You need to delete and redownload them to do that. This may require repurchasing paid ones.
(116535) -
After installing Lion the Software Update "can't check for updates because of a network problem". But I've no network problem. My internet is working properly. Could yoy help me?
Hi All
Same problem this morning but now resoloved.
Update require using the following url support.apple.com/kb/DL1437 update for lion 10.7.1
updates now work with this update
Hope this helps
Thanks -
After install CS6 then open AI, It show "PARM" error,
After install CS6 then open AI, It show "PARM" error, & then show a lot of "xxxxxx.aip" error, then cannot open
what's the first error after the param error.
or clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Hi, i'm using firefox nightly.
After today's flash player update im facing this error "style error #2134" when playinf videos on some websites. Tell me about info i have to provide to solve this problem. ThanksHello,
I am not a Flash developer, but based on my search, this particular error 'style error #2134' means that the Flash video / game that you are viewing is not able to store data on the local storage (your machine).
Can you please check the setting described in the Adobe KB [http://helpx.adobe.com/flash-player/kb/error-2134-cannot-create-sharedobject.html Enable Storage for Flash Player], to see if this helps in resolving the issue.
Thank you
Maybe you are looking for
-
I have 2 apple id's. But i want my music on iTunes common on both id's. I use one ID on my iPad and the other on my family iMac. how do i do it?
-
Links do not get highlighted in email messages
Hi! I upgraded to version 4.5 on my blackberry 8310 and now the links that I recieve in my emails do not get highlighted and i cant click on them to view the website. Is there anyway to change this? Solved! Go to Solution.
-
Special fonts to the long text
Hi all, I want to apply special fonts to the long text which I am saving using save text. I have a container in which I am wrintin the text,Now I want to provide the functionality such that I can make few lines bold,few undelined etc. same as we have
-
How to create a condition with out join
Hi all, I m using Oracle Discovere Desktop. I want to know that how can i use outer join in conditions. e.u. category(+) = 'E' Regards
-
Adobe Updater keeps doing the same update (CS4 Air 1.5)
Every time I run Adobe Updater it finds the same 100 Mb update - Flash 10.0.0.1 Adobe AIR 1.5 Update. Then, it downloads it and installs it. It notifies me that the installing process was completed. But when I run the Adobe Updater again, there is th