After installing ios 5, home sharing stopped working with iPad 2

After I've installed iOS 5, Home sharing stopped playing on my iPad 2.
I can SEE the content but the movies app simply hangs when I try playing it.
I can still play the content on an iPad 1 though..
Has anyone encountered something like that before?
P.S.
Using iTunes 10.5 on a PC running windows 7

After installling iOS5 the Videos App on my iPad2 takes forever to start films and TV shows from home sharing, if at all. I get a black screen after starting the film which can last between 10 seconds and a few minutes.
I've also noticed that I can't get the status of the film (volume, time etc.) to show when tapping the screen.
On top of all that, after having solved the issue with the TV shows being doubled and tripled up, I've noticed that the covers for movies are often on the wrong film.
Help!! Please!!

Similar Messages

  • Home sharing stops working with Apple TV after about one hour.. Apple TV drops my MAC and says Home Sharing not available.

    Hey there, Ihave the latest firmware update on my Apple TV 2. I have Lion with latest updates installed.
    I have home sharing turned on in iTunes 10 no issues their
    Network is set up as such.. Apple TV hardwired with Ethernet Cable, MAC where iTunes resides is WiFi on a dual band wireless N network. No dropped connections, network showing in perfect connected status.. All other home networking functions working perfectly. No wireless or ethernet disruptions.
    Apple TV works perfect for about one hour then all of a sudden stops and says home sharing is turned off.. but it's not. Double checked iTunes on the MAC, home sharing still set up no issues. I restart iTunes.. does not help, reboot MAC does not help. Reset Apple TV doesn't help.
    About an hour later, home sharing shows up in Apple TV again..
    Anyone else experience this? Any thoughts as to why Home Sharing on the Apple TV stops by itself when no changes are occuring?

    Hey there, Ihave the latest firmware update on my Apple TV 2. I have Lion with latest updates installed.
    I have home sharing turned on in iTunes 10 no issues their
    Network is set up as such.. Apple TV hardwired with Ethernet Cable, MAC where iTunes resides is WiFi on a dual band wireless N network. No dropped connections, network showing in perfect connected status.. All other home networking functions working perfectly. No wireless or ethernet disruptions.
    Apple TV works perfect for about one hour then all of a sudden stops and says home sharing is turned off.. but it's not. Double checked iTunes on the MAC, home sharing still set up no issues. I restart iTunes.. does not help, reboot MAC does not help. Reset Apple TV doesn't help.
    About an hour later, home sharing shows up in Apple TV again..
    Anyone else experience this? Any thoughts as to why Home Sharing on the Apple TV stops by itself when no changes are occuring?

  • Home Sharing stops working with fast user switching

    I have a late 2013 iMac running Mavericks.  The main account has my iTunes library with Home Sharing enabled.  The AppleTVs and IOS devices can see the Home Share and it works well.   But, it stops working when user accounts are accessed on the Mac.
    For instance, as soon as I select "Login Window..." from the fast user switching menu, the share is lost.  I did not log out, iTunes is still running.  I simply showed the login window.  All IOS and ATVs loose the share.  Switching to another user also stops the share.  It's as if iTunes is completed halted and not allowed to run in the background.
    When moving from the login screen back to the user account where the iTunes library is located, the home share is restored.  Likewise, moving from a 2nd user account back to the main account where iTunes is runnning restores the home share.
    I have a MacPro running Mountain Lion, and it works fine.  The iTunes library is always available for the devices, even if multiple users are signed into the Mac, or if the Mac is on the login screen.
    Any work around for Mavericks?  It competely breaks the entire media ecosystem if every device looses the home share if someone tries to use their account on the Mac.

    And just like that I may have found the solution! IT suddenly occured to me that one of the settings that got changed when we imported my wife's profile was a change to the sleep settings. Previously, I had had my iMac set to never go to sleep, since it shares our media with the rest of the house and runs eyeTV to record TV shows and such. For a little while after my wife's account was imported the settings to changes so that the computer would go to sleep after 15 minutes. I'm not totally sure why, but I think having that set up somehow meant that when we switched accounts my other account just "went to sleep" and therefore stopped sharing the iTunes library. After I noticed the change and switched the computer back to "never" for sleep the problem seems to have stopped.
    So perhaps check your sleep settings? That seems to be the only change I can think of that got things working correclty for me. I'll keep digging though and see if I can find any more helpful info. Good luck!

  • I upgraded my iTunes to 11.1, and upgraded my iPad to OS7 as well as my iPhone. Suddenly my home sharing stopped working with my apple TV.

    I installed the iTunes 11.1 update, upgraded my iPad to iOS7 and now my AppleTV does not see my home sharing. What the heck is going on?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • TS1741 Remote and Home Sharing stopped working with iTunes 10.7

    I have been using Apple Remote to control my Win 7 library as I play it via HDMI through my A/V receiver. I used it on iPad 2, iPhone 4s and iPod Touch 3G, with no problems for several weeks. Just today, however, I cannot get the devices to appear on the iTunes device list, and cannot access the library remotely. I have tried all devices while connected to the same network [tried this with three different networks]. I have turned off firewalls and anti-virus. I have rebooted and reset routers many times. Reinstalled iTunes. Repaired Bonjour. Confirmed port forwarding in routers and in firewalls. Confirmed account names and passwords.
    Airplay works fine.
    I believe the problem is in an iTunes or Windows setting that might have changed during an automatic update, but I can't find it.  Any ideas? Similar experiences? I know a lot of ATV issues have come up with other users, but these don't seem similar to my issue.
    Thanks.

    Somehow, this seems to have been resolved. The only changes I made were:
    1)  I disabled the wireless adapter in my Media server, and enabled the wired LAN adapter. Both are on the same router [192.168.2.1] I have been using wireless for several weeks without any problem. Of all the changes I made today, this is most likely the one that resolved the problem, for now!
    2)  I disconnected my Windows Home Server from the Verizon router [192.168.1.1] and connected it to the Linksys router that I use for my Media server. All my devices connect through the Linksys router, and the WHS box was not involved in any way to this sharing function [it is usually asleep]. As stated previously, I have used the Remote functions for several weeks without any troubles. All shared devices must be on the same router, and they have been;
    3) I also turned on media sharing for the folder containing my master music files, but this is NOT the same folder containing my iTunes libraries or my iTunes media files. This is only an original folder with the largest versions of all my music files [many that iTunes is unable to read].
    I don't know why any of these actions should have recovered my ability to Remote with iTunes, but alas, it "seems" to be working for now.
    Summary... Try everything, even if it seems completely unrelated!!!

  • Home sharing stops working in 11.2.0.115

    I have a large library on iTunes 11.2.0.115, running on a Windows 8.1 computer with 12GB RAM and abundant processor and disk.  I'm finding that Home Sharing stops working after one session, and then I have to turn it off and back on, re-entering my Apple ID and password.  Some of my other devices have an easier time than others, but none can find the library once it stops working.  Quitting and restarting iTunes, and/or rebooting do not work.  Disabling IPV6 doesn't work.
    The one that sees the library best is my AppleTV V3, updated to current firmware.  My iPhone 5S on IOS 7.1.1 almost never sees the library, and neither does my iPad 2.  My iMac Air sees the library after restarting Home Sharing.
    I've looked and see lots of threads about this here and elsewhere.  Are there any logs or anything I can look at for clues?  Is there a way to get help from Apple (without paying per incident?)
    I have turned on Match, and that seems to work pretty well.  I'm looking for central play counts, and shared playback of lossless files as my primary wants.  My whole family has Apple iPhones, and I'd like them to be able to use this library.
    Any ideas are appreciated.

    Hi jfschroeder,
    If you are having issues with Home Sharing from iTunes on your PC, you may want to follow the steps detailed in this article -
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    It sounds like you have already done some of the steps but it would be good if you can complete them all.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Home sharing stopped working on my Apple TV

    Home sharing stopped working on my Apple TV

    Thanks
    I don't need to try this yet I'm not sure what I did but after yet again unplugging atv, plugging an Ethernet cable in as our airport express stopped working after latest updates too, unplugged Ethernet and attempted a wireless connection it worked! For some reason after 4 days of not connecting the air port express works again! And atv is recognising home sharing.
    Updates are set to auto for atv so perhaps a patch there? Or just lucky combo of things I did?

  • HT2463 Home sharing stopped working. Windows 8 Netgear wndr3700 router

    Have two AppleTv's that home sharing stopped working on. Windows 8 Pro, Netgear WNDR3700, Dell 9100 XPS. Have gone through two calls with Appletv support but no permanent fix. Homesharing says it's on. on the appletv's and itunes, all with the same id. One call had me power cycle my Cox cable modem, Netgear router, PC and Appletv's but no go. Second call had me disable Port scan and DOS protection plus change NAT filtering from Secured to Open.This worked for a couple day then nothing. Windows firewall is on, inbound trafic allowed from itunes.
    PS3 and iPhones work fine on wireless
    Anyone have other ideas? Thx.

    This definitely helped. Trying this pointed to my PC. Turned out airplay was not loading when iTunes was started up. Had to restart my PC and then airplay loaded when I started up itunes. Once airplay was active home sharing worked on all my ATV's. I'll have to monitor and see how long this lasts.

  • My home sharing stopped working on my iphone, ipad and apple tv

    Hi, my remote app to use home sharing stopped working on my iphone, ipad, and apple tv, have tried turning the windows firewall off but still does not work?

    make sure the computer firewall or router does not block the shared lib feature

  • After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

    After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

    I ALSO just updated my brand new iphone 6 to 8.0.2, and I ALSO had my cellular service BRICKED.
    All I get on the signal meter is Verizon 1x.  Every so often 3G would popup and you could send a text (no calls though) but it's gone in seconds. So  I can't send texts or make phone calls.
    This phone worked immediately before the update and stopped working immediately after the update.
    My neighbor has a iphone 5S. He updated to 8.0.2 lat week and had no problems UNTIL just this morning, when his phone stopped working - no cellular voice or data. He downgraded back to ios 8.0 but his cellular service never came back.
    Called verizon - was told there were no service outages and then I got transferred to tech team.
    Tech team had do all the Apple troubleshooting steps but nothing more. So they said "take it back."
    So this BRAND NEW iPhone 6 phone is BRICKED because of iOS 8.0.2.
    Thanks Apple!

  • IPad home sharing stopped working w/ ios7

    Home sharing on my iPad just hangs.
    I have a large video library, so it took awhile to load it under ios6, but now it has stopped working altogether. The little wheel just keeps spinning around and around, then after about 5 minutes the video app crashes. There's some Quality Apple Software™ for you...
    I've tried logging out of home sharing & logging back in; power cycling all devices, etc. I'm pretty sure the problem isn't with iTunes, because my Apple TV is loading up the entire video library in a matter of just a few seconds.
    Is there ANYTHING I can do to get home sharing to work on this iPad 3?

    I am having this exact same issue on an iPAd 2 and iPad mini in videos. I also have this issue in Music on a 4s. After many attempts, turning on/off home sharing in itunes, rebooting, and esetting the entire network settings in the 4s, because Messages wasn't sending.. The 4s is finally filling in the circle as it tries to connect. I have a large video and audio library (Apple's seen a lot of income from me), but the 20min to load n the 4s is absurd.
    Still can't get Video to connect to home sharing on either iPad. I've been trying many times for this 'magic' attempt to happen, but so far no luck. Very frustraed right now.

  • Cant find i i life after installing it and iphoto has stopped working

    cant find i i life after installing it and iphoto has stopped working

    If it is a new Mac then iLife came preinstalled on it
    As to searching for iLife - it is not an application - it is a suite of five applications - iPhoto - iMovie - IDVD - iWeb - Garage Band  --  http://store.apple.com/us/product/MC623Z/A/iLife-11?fnode=NDQ5MDg0MA&mco=MjA4Nzk 4OTQ
    Do you have these five applications in your applications folder?
    what happens when you launch them?
    LN

  • Windows 7 Home Premium stops working with ADobe Create PDF

    Windows 7 home premium after a year of working fine, today stopped working with create PDF printer. I print to the PDF printer, looks normal, but no file appears in my files of PDFs created on line. My laptop running Windows 7 Professional has had no such problem. Please advise.

    Windows 7 home premium after a year of working fine, today stopped working with create PDF printer. I print to the PDF printer, looks normal, but no file appears in my files of PDFs created on line. My laptop running Windows 7 Professional has had no such problem. Please advise.

  • Can't get Home Sharing to work with ATV, v7.0.3 and iTunes 12.1.0.50

    I can't get Home Sharing to work. I'm looking at my MacBook screen and iTunes says Home Sharing is On. On Apple TV, it says Turn On Home Sharing in iTunes. Both are using the same Apple ID and password (signed out and signed back in manually on both). I have tried the following: Signing out of and into Home Sharing on Apple TV and iTunes, closing iTunes and restarting the MacBook, restarting and restoring Apple TV to factory settings, restarting my router, all possible iterations of the aforementioned. Nothing seems to work. Also tried renaming my computer in preferences/sharing.
    Any new ideas?
    Using ATV3 software v7.0.3
    iTunes software v12.1.0.50
    MacBook software OS X Yosemite v10.10.2

    Only have one network; wireless. On it's own, the MacBook can use wifi to surf the net and Apple TV can watch movie previews from Apple via wifi.
    It did work about two months ago. I haven't used it since then for home sharing but have used the Apple TV on its own.
    I read the Troubleshooting page on Apple Support. It involves turning various things on and off, which I did

  • Home Sharing Stops Working After a Few Minutes

    Since upgrading to 10.6.1.7, iTunes spontaneously stops Home Sharing after some minutes of playing back content via my Apple TV Gen 3. The Apple TV which had just been in the middle of playing content, reverts back to the home screen with a message about Home Sharing at the top. If I then click on Computers, it informs me that I should turn on Home Sharing in iTunes. It is already turned on as I was just in the middle of using it. The computer and the Apple TV are plugged into the same switch. The only work-around that I've found is to exit the iTunes application an restart it each time that it fails every few minutes. This makes watching content incredibly exasperating. Are there any better work-arounds with more longevity? This problem effectively makes the Apple TV a worthless device, and I may be returning it soon.

    Same issue exactly.  Best thing to di is contact Apple so that they become aware of this regression.  Below is what I have been posting:
    Home sharing with the new Apple TV / iTunes update is just broke.  Only works for a bit unless you restart iTunes or disable / re-enable Home Sharing.  Use to work great until the last updates.  This is not a network (router, firewall, ...) issue - just a (bad) regression in Apples software.  Hopefully they fix this soon, hard to believe its been broke this long already.  The Remote app update also fails to connect to Apple TVs (but does connect to iTunes) for many people as well.  Poor QA all around. :(
    I have yet to see any suggestion that actually works other than reverting to previous versions of fwr / iTunes - which is a pain / joke to do.
    There are a *ton* of posts about this:
    https://discussions.apple.com/message/18078180#18078180
    https://discussions.apple.com/message/18078351#18078351
    https://discussions.apple.com/message/18078326#18078326
    https://discussions.apple.com/message/18078599#18078599
    https://discussions.apple.com/message/18078600#18078600
    https://discussions.apple.com/message/18087017#18087017
    https://discussions.apple.com/message/18082439#18082439
    https://discussions.apple.com/message/18086263#18086263
    https://discussions.apple.com/message/18083552#18083552
    https://discussions.apple.com/message/18103713#18103713
    https://discussions.apple.com/message/18106478#18106478
    etc...

Maybe you are looking for

  • Error Message when attempting to load a web page

    I keep getting the following message when I try to go to adobetv pse11 tutorials using Google or Google Chrome. How can I correct this?  I am using VAIO with Win 8 Pro. Message title was edited by: Brett N

  • Tables used for a Stock-In-Hand Report ?

    Hi, I need to generate a stock in hand report. For this report I only need to consider Purchasing Inventory Stock and not the Sales Order Stock. What tables do I have to use?, if possible the query! Thanks, Kishan

  • Link Checker not finding all errors

    Hi. I am running the link checker, but its not finding all my errors - does anyone know why? -- for example - links like "/products/index.html should be "../products/index.html -- but link checker is not flagging this as wrong. Also the opposite - if

  • How to Get the sentitems count in exchange server 2010

    hi, I want to take all users sent items count in exchange 2010

  • How do I force SAP to process a MIGO idoc from an external system

    Hi All, We have a WMS system integrated to the SAP Apparel solution. If a SKU line has 100 units and 98 are reserved against an order the following can occur. A user in the warehouse has lost 20 units and processes a downward adjustment for 20 units.